Logic and Memory Design Based on Unequal Error Protection for Voltage-scalable, Robust and Adaptive DSP Systems

In this paper, we propose a system level design approach considering voltage over-scaling (VOS) that achieves error resiliency using unequal error protection of different computation elements, while incurring minor quality degradation. Depending on user specifications and severity of process variations/channel noise, the degree of VOS in each block of the system is adaptively tuned to ensure minimum system power while providing "just-the-right” amount of quality and robustness. This is achieved, by taking into consideration block level interactions and ensuring that under any change of operating conditions, only the "less- crucial” computations, that contribute less to block/system output quality, are affected. The proposed approach applies unequal error protection to various blocks of a system-logic and memory-and spans multiple layers of design hierarchy-algorithm, architecture and circuit. The design methodology when applied to a multimedia sub-system shows large power benefits (up to 69% improvement in power consumption) at reasonable image quality while tolerating errors introduced due to VOS, process variations, and channel nois

Autonomous Recovery Of Reconfigurable Logic Devices Using Priority Escalation Of Slack

Field Programmable Gate Array (FPGA) devices offer a suitable platform for survivable hardware architectures in mission-critical systems. In this dissertation, active dynamic redundancy-based fault-handling techniques are proposed which exploit the dynamic partial reconfiguration capability of SRAM-based FPGAs. Self-adaptation is realized by employing reconfiguration in detection, diagnosis, and recovery phases. To extend these concepts to semiconductor aging and process variation in the deep submicron era, resilient adaptable processing systems are sought to maintain quality and throughput requirements despite the vulnerabilities of the underlying computational devices. A new approach to autonomous fault-handling which addresses these goals is developed using only a uniplex hardware arrangement. It operates by observing a health metric to achieve Fault Demotion using Recon- figurable Slack (FaDReS). Here an autonomous fault isolation scheme is employed which neither requires test vectors nor suspends the computational throughput, but instead observes the value of a health metric based on runtime input. The deterministic flow of the fault isolation scheme guarantees success in a bounded number of reconfigurations of the FPGA fabric. FaDReS is then extended to the Priority Using Resource Escalation (PURE) online redundancy scheme which considers fault-isolation latency and throughput trade-offs under a dynamic spare arrangement. While deep-submicron designs introduce new challenges, use of adaptive techniques are seen to provide several promising avenues for improving resilience. The scheme developed is demonstrated by hardware design of various signal processing circuits and their implementation on a Xilinx Virtex-4 FPGA device. These include a Discrete Cosine Transform (DCT) core, Motion Estimation (ME) engine, Finite Impulse Response (FIR) Filter, Support Vector Machine (SVM), and Advanced Encryption Standard (AES) blocks in addition to MCNC benchmark circuits. A iii significant reduction in power consumption is achieved ranging from 83% for low motion-activity scenes to 12.5% for high motion activity video scenes in a novel ME engine configuration. For a typical benchmark video sequence, PURE is shown to maintain a PSNR baseline near 32dB. The diagnosability, reconfiguration latency, and resource overhead of each approach is analyzed. Compared to previous alternatives, PURE maintains a PSNR within a difference of 4.02dB to 6.67dB from the fault-free baseline by escalating healthy resources to higher-priority signal processing functions. The results indicate the benefits of priority-aware resiliency over conventional redundancy approaches in terms of fault-recovery, power consumption, and resource-area requirements. Together, these provide a broad range of strategies to achieve autonomous recovery of reconfigurable logic devices under a variety of constraints, operating conditions, and optimization criteria

Containing the Nanometer “Pandora-Box”: Cross-Layer Design Techniques for Variation Aware Low Power Systems

The demand for richer multimedia services, multifunctional portable devices and high data rates can only been visioned due to the improvement in semiconductor technology. Unfortunately, sub-90 nm process nodes uncover the nanometer Pandora-box exposing the barriers of technology scaling—parameter variations, that threaten the correct operation of circuits, and increased energy consumption, that limits the operational lifetime of today’s systems. The contradictory design requirements for low-power and system robustness, is one of the most challenging design problems of today. The design efforts are further complicated due to the heterogeneous types of designs (logic, memory, mixed-signal) that are included in today’s complex systems and are characterized by different design requirements. This paper presents an overview of techniques at various levels of design abstraction that lead to low power and variation aware logic, memory and mixed-signal circuits and can potentially assist in meeting the strict power budgets and yield/quality requirements of future systems

Design and Applications of Approximate Circuits by Gate-Level Pruning

Energy-efficiency is a critical concern for many systems, ranging from Internet of things objects and mobile devices to high-performance computers. Moreover, after 40 years of prosperity, Moore's law is starting to show its economic and technical limits. Noticing that many circuits are over-engineered and that many applications are error-resilient or require less precision than offered by the existing hardware, approximate computing has emerged as a potential solution to pursue improvements of digital circuits. In this regard, a technique to systematically tradeoff accuracy in exchange for area, power, and delay savings in digital circuits is proposed: gate-level pruning (GLP). A CAD tool is build and integrated into a standard digital flow to offer a wide range of cost-accuracy tradeoffs for any conventional design. The methodology is first demonstrated on adders, achieving up to 78% energy-delay-area reduction for 10% mean relative error. It is then detailed how this methodology can be applied on a more complex system composed of a multitude of arithmetic blocks and memory: the discrete cosine transform (DCT), which is a key building block for image and video processing applications. Even though arithmetic circuits represent less than 4% of the entire DCT area, it is shown that the GLP technique can lead to 21% energy-delay-area savings over the entire system for a reasonable image quality loss of 24 dB. This significant saving is achieved thanks to the pruned arithmetic circuits, which sets some nodes at constant values, enabling the synthesis tool to further simplify the circuit and memory

Timing-Error Tolerance Techniques for Low-Power DSP: Filters and Transforms

Low-power Digital Signal Processing (DSP) circuits are critical to commercial System-on-Chip design for battery powered devices. Dynamic Voltage Scaling (DVS) of digital circuits can reclaim worst-case supply voltage margins for delay variation, reducing power consumption. However, removing static margins without compromising robustness is tremendously challenging, especially in an era of escalating reliability concerns due to continued process scaling. The Razor DVS scheme addresses these concerns, by ensuring robustness using explicit timing-error detection and correction circuits. Nonetheless, the design of low-complexity and low-power error correction is often challenging. In this thesis, the Razor framework is applied to fixed-precision DSP filters and transforms. The inherent error tolerance of many DSP algorithms is exploited to achieve very low-overhead error correction. Novel error correction schemes for DSP datapaths are proposed, with very low-overhead circuit realisations. Two new approximate error correction approaches are proposed. The first is based on an adapted sum-of-products form that prevents errors in intermediate results reaching the output, while the second approach forces errors to occur only in less significant bits of each result by shaping the critical path distribution. A third approach is described that achieves exact error correction using time borrowing techniques on critical paths. Unlike previously published approaches, all three proposed are suitable for high clock frequency implementations, as demonstrated with fully placed and routed FIR, FFT and DCT implementations in 90nm and 32nm CMOS. Design issues and theoretical modelling are presented for each approach, along with SPICE simulation results demonstrating power savings of 21 – 29%. Finally, the design of a baseband transmitter in 32nm CMOS for the Spectrally Efficient FDM (SEFDM) system is presented. SEFDM systems offer bandwidth savings compared to Orthogonal FDM (OFDM), at the cost of increased complexity and power consumption, which is quantified with the first VLSI architecture

Approximate computing: An integrated cross-layer framework

A new design approach, called approximate computing (AxC), leverages the flexibility provided by intrinsic application resilience to realize hardware or software implementations that are more efficient in energy or performance. Approximate computing techniques forsake exact (numerical or Boolean) equivalence in the execution of some of the application’s computations, while ensuring that the output quality is acceptable. While early efforts in approximate computing have demonstrated great potential, they consist of ad hoc techniques applied to a very narrow set of applications, leaving in question the applicability of approximate computing in a broader context. The primary objective of this thesis is to develop an integrated cross-layer approach to approximate computing, and to thereby establish its applicability to a broader range of applications. The proposed framework comprises of three key components: (i) At the circuit level, systematic approaches to design approximate circuits, or circuits that realize a slightly modified function with improved efficiency, (ii) At the architecture level, utilize approximate circuits to build programmable approximate processors, and (iii) At the software level, methods to apply approximate computing to machine learning classifiers, which represent an important class of applications that are being utilized across the computing spectrum. Towards this end, the thesis extends the state-of-the-art in approximate computing in the following important directions. Synthesis of Approximate Circuits: First, the thesis proposes a rigorous framework for the automatic synthesis of approximate circuits , which are the hardware building blocks of approximate computing platforms. Designing approximate circuits involves making judicious changes to the function implemented by the circuit such that its hardware complexity is lowered without violating the specified quality constraint. Inspired by classical approaches to Boolean optimization in logic synthesis, the thesis proposes two synthesis tools called SALSA and SASIMI that are general, i.e., applicable to any given circuit and quality specification. The framework is further extended to automatically design quality configurable circuits , which are approximate circuits with the capability to reconfigure their quality at runtime. Over a wide range of arithmetic circuits, complex modules and complete datapaths, the circuits synthesized using the proposed framework demonstrate significant benefits in area and energy. Programmable AxC Processors: Next, the thesis extends approximate computing to the realm of programmable processors by introducing the concept of quality programmable processors (QPPs). A key principle of QPPs is that the notion of quality is explicitly codified in their HW/SW interface i.e., the instruction set. Instructions in the ISA are extended with quality fields, enabling software to specify the accuracy level that must be met during their execution. The micro-architecture is designed with hardware mechanisms to understand these quality specifications and translate them into energy savings. As a first embodiment of QPPs, the thesis presents a quality programmable 1D/2D vector processor QP-Vec, which contains a 3-tiered hierarchy of processing elements. Based on an implementation of QP-Vec with 289 processing elements, energy benefits up to 2.5X are demonstrated across a wide range of applications. Software and Algorithms for AxC: Finally, the thesis addresses the problem of applying approximate computing to an important class of applications viz. machine learning classifiers such as deep learning networks. To this end, the thesis proposes two approaches—AxNN and scalable effort classifiers. Both approaches leverage domain- specific insights to transform a given application to an energy-efficient approximate version that meets a specified application output quality. In the context of deep learning networks, AxNN adapts backpropagation to identify neurons that contribute less significantly to the network’s accuracy, approximating these neurons (e.g., by using lower precision), and incrementally re-training the network to mitigate the impact of approximations on output quality. On the other hand, scalable effort classifiers leverage the heterogeneity in the inherent classification difficulty of inputs to dynamically modulate the effort expended by machine learning classifiers. This is achieved by building a chain of classifiers of progressively growing complexity (and accuracy) such that the number of stages used for classification scale with input difficulty. Scalable effort classifiers yield substantial energy benefits as a majority of the inputs require very low effort in real-world datasets. In summary, the concepts and techniques presented in this thesis broaden the applicability of approximate computing, thus taking a significant step towards bringing approximate computing to the mainstream. (Abstract shortened by ProQuest.

Cross-Layer Inexact Design for Low-Power Applications

Approximate and error tolerant circuits are a radical new approach to trade calculation accuracy for better speed, power, area and yield. The IcySoC project platform revisits low-power and low-voltage VLSI design through a cross-layer combined inexact design framework