A novel scan segmentation design method for avoiding shift timing failure in scan testing

ITC : 2011 IEEE International Test Conference , 20-22 Sep. 2011 , Anaheim, CA, USAHigh power consumption in scan testing can cause undue yield loss which has increasingly become a serious problem for deep-submicron VLSI circuits. Growing evidence attributes this problem to shift timing failures, which are primarily caused by excessive switching activity in the proximities of clock paths that tends to introduce severe clock skew due to IR-drop-induced delay increase. This paper is the first of its kind to address this critical issue with a novel layout-aware scheme based on scan segmentation design, called LCTI-SS (Low-Clock-Tree-Impact Scan Segmentation). An optimal combination of scan segments is identified for simultaneous clocking so that the switching activity in the proximities of clock trees is reduced while maintaining the average power reduction effect on conventional scan segmentation. Experimental results on benchmark and industrial circuits have demonstrated the advantage of the LCTI-SS scheme

Power-Aware Testing For Low-Power VLSI Circuits

Low-power VLSI circuits are indispensable for almost all types of modern electronic devices, from battery-driven mobile gadgets to harvested-energy-driven wireless sensor systems. However, the testing of such low-power VLSI circuits has become a big challenge, especially due to the excessive power dissipation during scan testing. This paper will highlight three major test-power-induced problems (namely heat, false failures, clock stretch) and describe how to mitigate them with power-aware VLSI testing. Future research topics in this field will also be discussed.13th IEEE International Conference on Solid-State and Integrated Circuit Technology (ICSICT-2016), 25-28 October 2016, Hangzhou, Chin

A survey of scan-capture power reduction techniques

With the advent of sub-nanometer geometries, integrated circuits (ICs) are required to be checked for newer defects. While scan-based architectures help detect these defects using newer fault models, test data inflation happens, increasing test time and test cost. An automatic test pattern generator (ATPG) exercise’s multiple fault sites simultaneously to reduce test data which causes elevated switching activity during the capture cycle. The switching activity results in an IR drop exceeding the devices under test (DUT) specification. An increase in IR-drop leads to failure of the patterns and may cause good DUTs to fail the test. The problem is severe during at-speed scan testing, which uses a functional rated clock with a high frequency for the capture operation. Researchers have proposed several techniques to reduce capture power. They used various methods, including the reduction of switching activity. This paper reviews the recently proposed techniques. The principle, algorithm, and architecture used in them are discussed, along with key advantages and limitations. In addition, it provides a classification of the techniques based on the method used and its application. The goal is to present a survey of the techniques and prepare a platform for future development in capture power reduction during scan testing

On Guaranteeing Capture Safety in At-Speed Scan Testing with Broadcast-Scan-Based Test Compression

Capture safety has become a major concern in at-speed scan testing since strong power supply noise caused by excessive launch switching activity (LSA) at transition launching in an at-speed test cycle often results in severe timing-failure-induced yield loss. Recently, a basic RM (rescue-&-mask) test generation scheme was proposed for guaranteeing capture safety rather than merely reducing LSA to some extent. This paper extends the basic RM scheme to broadcast-scan-based test compression by uniquely solving two test-compression-induced problems, namely (1) input X-bit insufficiency (i.e., fewer input X-bits are available for LSA reduction due to test compression) and (2) output X-bit impact (i.e., output X-bits may reduce fault coverage due to test response compaction). This leads to the broadcast-RM (broadcast-scan-based rescue-&-mask) test generation scheme. Evaluations on large benchmark circuits and an industrial circuit of about 1M gates clearly demonstrate that this novel scheme can indeed guarantee capture safety in at-speed scan testing with broadcast-scan-based test compression while minimizing its impact on both test quality and test costs.2013 26th International Conference on VLSI Design, 5-10 January 2013, Pune, Indi

Logic/Clock-Path-Aware At-Speed Scan Test Generation for Avoiding False Capture Failures and Reducing Clock Stretch

IR-drop induced by launch switching activity (LSA) in capture mode during at-speed scan testing increases delay along not only logic paths (LPs) but also clock paths (Cps). Excessive extra delay along LPs compromises test yields due to false capture failures, while excessive extra delay along CPs compromises test quality due to test clock stretch. This paper is the first to mitigate the impact of LSA on both LPs and CPs with a novel LCPA (Logic/Clock Path-Aware) at-speed scan test generation scheme, featuring (1) a new metric for assessing the risk of false capture failures based on the amount of LSA around both LPs and CPs, (2) a procedure for avoiding false capture failures by reducing LSA around LPs or masking uncertain test responses, and (3) a procedure for reducing test clock stretch by reducing LSA around CPs. Experimental results demonstrate the effectiveness of the LCPA scheme in improving test yields and test quality.2015 IEEE 24th Asian Test Symposium (ATS), 22-25 November 2015, Mumbai, Indi

On pinpoint capture power management in at-speed scan test generation

This paper proposes a novel scheme to manage capture power in a pinpoint manner for achieving guaranteed capture power safety, improved small-delay test capability, and minimal test cost impact in at-speed scan test generation. First, switching activity around each long path sensitized by a test vector is checked to characterize it as hot (with excessively-high switching activity), warm (with normal/functional switching activity), or cold (with excessively-low switching activity). Then, X-restoration/X-filling-based rescue is conducted on the test vector to reduce switching activity around hot paths. If the rescue is insufficient to turn a hot path into a warm path, mask is then conducted on expected test response data to instruct the tester to ignore the potentially-false test response value from the hot path, thus achieving guaranteed capture power safety. Finally, X-restoration/X-filling-based warm-up is conducted on the test vector to increase switching activity around cold paths for improving their small-delay test capability. This novel approach of pinpoint capture power management has significant advantages over the conventional approach of global capture power management, as demonstrated by evaluation results on large ITC\u2799 benchmark circuits and detailed path delay analysis.2012 IEEE International Test Conference, 5-8 November 2012, Anaheim, CA, US

On Achieving Capture Power Safety in At-Speed Scan-Based Logic BIST

The applicability of at-speed scan-based logic built-in self-test (BIST) is being severely challenged by excessive capture power that may cause erroneous test responses for good chips. Different from conventional low-power BIST, this paper is the first that has explicitly focused on achieving capture power safety with a practical scheme called capture-power-safe BIST (CPS-BIST). The basic idea is to identify all possibly erroneous test responses and use the well-known technique of mask (partial-mask or full-mask) to block them from reaching the MISR. Experiments with large benchmark and industrial circuits show that CPS-BIST can achieve capture power safety with negligible impact on both test quality and area overhead.2013 22nd Asian Test Symposium, 18-21 November 2013, Jiaosi Township, Taiwa

A Novel Scan Segmentation Design Method for Avoiding Shift Timing Failure in Scan Testing

High power consumption in scan testing can cause undue yield loss which has increasingly become a serious problem for deep-submicron VLSI circuits. Growing evidence attributes this problem to shift timing failures, which are primarily caused by excessive switching activity in the proximities of clock paths that tends to introduce severe clock skew due to IR-drop-induced delay increase. This paper is the first of its kind to address this critical issue with a novel layout-aware scheme based on scan segmentation design, called LCTI-SS (Low-Clock-Tree-Impact Scan Segmentation). An optimal combination of scan segments is identified for simultaneous clocking so that the switching activity in the proximities of clock trees is reduced while maintaining the average power reduction effect on conventional scan segmentation. Experimental results on benchmark and industrial circuits have demonstrated the advantage of the LCTI-SS scheme.2011 IEEE International Test Conference, 20-22 September 2011, Anaheim, CA, US

A Capture-Safe Test Generation Scheme for At-Speed Scan Testing

Capture-safety, defined as the avoidance of any timing error due to unduly high launch switching activity in capture mode during at-speed scan testing, is critical for avoiding test- induced yield loss. Although point techniques are available for reducing capture IR-drop, there is a lack of complete capture-safe test generation flows. The paper addresses this problem by proposing a novel and practical capture-safe test generation scheme, featuring (1) reliable capture-safety checking and (2) effective capture-safety improvement by combining X-bit identification & X-filling with low launch- switching-activity test generation. This scheme is compatible with existing ATPG flows, and achieves capture-safety with no changes in the circuit-under-test or the clocking scheme.2008 13th European Test Symposium, 25-29 May 2008, Verbania, Ital