Power allocation in a QoS-aware cellular-based vehicular communication system.

Masters Degree. University of KwaZulu- Natal, Durban.The task of a driver assistance system is to monitor the surrounding environment of a vehicle and provide an appropriate response in the case of detecting any hazardous condition. Such operation requires real-time processing of a large amount of information, which is gathered by a variety of sensors. Vehicular communication in future vehicles can pave the way for designing highly efficient and cost-effective driver assistance systems based on collaborative and remote processing solutions. The main transmission links of vehicular communication systems are vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I). In this research, a cellular-based vehicular communication system is proposed where Device-to-device (D2D) communication links are considered for establishing V2V links, and cellular communication links are employed for V2I links. D2D communication is one of the enablers of the next generation of cellular networks for improving spectrum and power utilization. D2D communication allows direct communication between user equipments within a cellular system. Nevertheless, implementing D2D communication should not defect nearby ongoing communication services. As a result, interference management is a significant aspect of designing D2D communication systems. Communication links in a cellular network are supposed to support a required level of data rates. The capacity of a communication channel is directly proportional to the energy of a transmitted signal, and in fact, achieving the desired level of Quality of Service (QoS) requires careful control of transmission power for all the radio sources within a system. Among different methods that are recommended for D2D communications, in-band D2D can offer better control over power transmission sources. In an underlay in-band D2D communication system, D2D user equipments (DUEs) usually reuse the cellular uplink (UL) spectrum. In such a system, the level of interference can effectively be managed by controlling the level of power that is transmitted by user equipments. To effectively perform the interference management, knowledge of the channel state information is required. However, as a result of the distributed nature of DUEs, such information is not fully attainable in a practical D2D system. Therefore, statistical methods are employed to find boundaries on the allocated transmission powers for achieving sufficient spectral efficiencies in V2I and V2V links without considering any prior knowledge on vehicles’ locations or the channel state information. Furthermore, the concepts of massive multiple-input multiple-output and underlay D2D communication sharing the uplink spectrum of a cellular system are used to minimize the interference effect

Radio resource allocation for overlay D2D-based vehicular communications in future wireless networks

Mobilfunknetze der nächsten Generation ermöglichen einen weitverbreiteten Einsatz von Device-to-Device Kommunikation, der direkten Kommunikation zwischen zellularen Endgeräten. Für viele Anwendungsfälle zur direkten Kommunikation zwischen Endgeräten sind eine deterministische Latenz und die hohe Zuverlässigkeit von zentraler Bedeutung. Dienste zur direkten Kommunikation (D2D) für in der Nähe befindliche Endgeräte sind vielversprechend die hohen Anforderungen an Latenz und Zuverlässigkeit für zukünftige vertikale Anwendungen zu erfüllen. Eine der herausragenden vertikalen Anwendungen ist die Fahrzeugkommunikation, bei der die Fahrzeuge sicherheitskritische Meldungen direkt über D2D-Kommunikation austauschen, die dadurch zur Reduktion von Verkehrsunfällen und gleichzeitig von Todesfällen im Straßenverkehrt beiträgt. Neue Techniken zur effizienteren Zuweisung von Funkressourcen in der D2D-Kommunikation haben in letzter Zeit in Industrie und Wissenschaft große Aufmerksamkeit erlangt. Zusätzlich zur Allokation von Ressourcen, wird die Energieeffizienz zunehmend wichtiger, die normalerweise im Zusammenhang mit der Ressourcenallokation behandelt wird. Diese Dissertation untersucht verschiedener Ansätze der Funkressourcenzuweisung und Energieeffizienztechniken in der LTE und NR V2X Kommunikation. Im Folgenden beschreiben wir kurz die Kernideen der Dissertation. Meist zeichnen sich D2D-Anwendungen durch ein relativ geringes Datenvolumen aus, die über Funkressourcen übertragen werden. In LTE können diese Funkressourcen aufgrund der groben Granularität für die Ressourcenzuweisung nicht effizient genutzt werden. Insbesondere beim semi-persistenten Scheduling, bei dem eine Funkressource über einen längeren Zeitraum im Overlay D2D festgelegt wird, sind die Funkressourcen für solche Anwendungen nicht ausgelastet. Um dieses Problem zu lösen, wird eine hierarchische Form für das Management der Funkressourcen, ein sogenanntes Subgranting-Schema, vorgeschlagen. Dabei kann ein nahegelegener zellularer Nutzer, der sogenannte begünstigte Nutzer, ungenutzten Funkressourcen, die durch Subgranting-Signalisierung angezeigt werden, wiederzuverwenden. Das vorgeschlagene Schema wird bewertet und mit "shortening TTI", einen Schema mit reduzierten Sendezeitintervallen, in Bezug auf den Zellendurchsatz verglichen. Als nächster Schritt wird untersucht, wie der begünstigten Benutzer ausgewählt werden kann und als Maximierungsproblem des Zellendurchsatzes im Uplink unter Berücksichtigung von Zuverlässigkeits- und Latenzanforderungen dargestellt. Dafür wird ein heuristischer zentralisierter, d.h. dedizierter Sub-Granting-Radio-Ressource DSGRR-Algorithmus vorgeschlagen. Die Simulationsergebnisse und die Analyse ergeben in einem Szenario mit stationären Nutzern eine Erhöhung des Zelldurchsatzes bei dem Einsatz des vorgeschlagenen DSGRR-Algorithmus im Vergleich zu einer zufälligen Auswahl von Nutzern. Zusätzlich wird das Problem der Auswahl des begünstigten Nutzers in einem dynamischen Szenario untersucht, in dem sich alle Nutzer bewegen. Wir bewerten den durch das Sub-Granting durch die Mobilität entstandenen Signalisierungs-Overhead im DSGRR. Anschließend wird ein verteilter Heuristik-Algorithmus (OSGRR) vorgeschlagen und sowohl mit den Ergebnissen des DSGRR-Algorithmus als auch mit den Ergebnissen ohne Sub-Granting verglichen. Die Simulationsergebnisse zeigen einen verbesserten Zellendurchsatz für den OSGRR im Vergleich zu den anderen Algorithmen. Außerdem ist zu beobachten, dass der durch den OSGRR entstehende Overhead geringer ist als der durch den DSGRR, während der erreichte Zellendurchsatz nahe am maximal erreichbaren Uplink-Zellendurchsatz liegt. Zusätzlich wird die Ressourcenallokation im Zusammenhang mit der Energieeffizienz bei autonomer Ressourcenauswahl in New Radio (NR) Mode 2 untersucht. Die autonome Auswahl der Ressourcen wird als Verhältnis von Summenrate und Energieverbrauch formuliert. Das Ziel ist den Stromverbrauch der akkubetriebenen Endgeräte unter Berücksichtigung der geforderten Zuverlässigkeit und Latenz zu minimieren. Der heuristische Algorithmus "Density of Traffic-based Resource Allocation (DeTRA)" wird als Lösung vorgeschlagen. Bei dem vorgeschlagenen Algorithmus wird der Ressourcenpool in Abhängigkeit von der Verkehrsdichte pro Verkehrsart aufgeteilt. Die zufällige Auswahl erfolgt zwingend auf dem dedizierten Ressourcenpool beim Eintreffen aperiodischer Daten. Die Simulationsergebnisse zeigen, dass der vorgeschlagene Algorithmus die gleichen Ergebnisse für die Paketempfangsrate (PRR) erreicht, wie der sensing-basierte Algorithmus. Zusätzlich wird der Stromverbrauch des Endgeräts reduziert und damit die Energieeffizienz durch die Anwendung des DeTRA-Algorithmus verbessert. In dieser Arbeit werden Techniken zur Allokation von Funkressourcen in der LTE-basierten D2D-Kommunikation erforscht und eingesetzt, mit dem Ziel Funkressourcen effizienter zu nutzen. Darüber hinaus ist der in dieser Arbeit vorgestellte Ansatz eine Basis für zukünftige Untersuchungen, wie akkubasierte Endgeräte mit minimalem Stromverbrauch in der NR-V2X-Kommunikation Funkressourcen optimal auswählen können.Next-generation cellular networks are envisioned to enable widely Device-to-Device (D2D) communication. For many applications in the D2D domain, deterministic communication latency and high reliability are of exceptionally high importance. The proximity service provided by D2D communication is a promising feature that can fulfil the reliability and latency requirements of emerging vertical applications. One of the prominent vertical applications is vehicular communication, in which the vehicles disseminate safety messages directly through D2D communication, resulting in the fatality rate reduction due to a possible collision. Radio resource allocation techniques in D2D communication have recently gained much attention in industry and academia, through which valuable radio resources are allocated more efficiently. In addition to the resource allocation techniques, energy sustainability is highly important and is usually considered in conjunction with the resource allocation approach. This dissertation is dedicated to studying different avenues of the radio resource allocation and energy efficiency techniques in Long Term Evolution (LTE) and New Radio (NR) Vehicle-to-Everythings (V2X) communications. In the following, we briefly describe the core ideas in this study. Mostly, the D2D applications are characterized by relatively small traffic payload size, and in LTE, due to coarse granularity of the subframe, the radio resources can not be utilized efficiently. Particularly, in the case of semi-persistent scheduling when a radio resource is scheduled for a longer time in the overlay D2D, the radio resources are underutilized for such applications. To address this problem, a hierarchical radio resource management scheme, i.e., a sub-granting scheme, is proposed by which nearby cellular users, i.e., beneficiary users, are allowed to reuse the unused radio resource indicated by sub-granting signaling. The proposed scheme is evaluated and compared with shortening Transmission Time Interval (TTI) schemes in terms of cell throughput. Then, the beneficiary user selection problem is investigated and is cast as a maximization problem of uplink cell throughput subject to reliability and latency requirements. A heuristic centralized, i.e., dedicated sub-granting radio resource Dedicated Sub-Granting Radio Resource (DSGRR) algorithm is proposed to address the original beneficiary user selection problem. The simulation results and analysis show the superiority of the proposed DSGRR algorithm over the random beneficiary user selection algorithm in terms of the cell throughput in a scenario with stationary users. Further, the beneficiary user selection problem is investigated in a scenario where all users are moving in a dynamic environment. We evaluate the sub-granting signaling overhead due to mobility in the DSGRR, and then a distributed heuristics algorithm, i.e., Open Sub-Granting Radio Resource (OSGRR), is proposed and compared with the DSGRR algorithm and no sub-granting case. Simulation results show improved cell throughput for the OSGRR compared with other algorithms. Besides, it is observed that the overhead incurred by the OSGRR is less than the DSGRR while the achieved cell throughput is yet close to the maximum achievable uplink cell throughput. Also, joint resource allocation and energy efficiency in autonomous resource selection in NR, i.e. Mode 2, is examined. The autonomous resource selection is formulated as a ratio of sum-rate and energy consumption. The objective is to minimize the energy efficiency of the power-saving users subject to reliability and latency requirements. A heuristic algorithm, density of traffic-based resource allocation (DeTRA), is proposed to solve the problem. The proposed algorithm splits the resource pool based on the traffic density per traffic type. The random selection is then mandated to be performed on the dedicated resource pool upon arrival of the aperiodic traffic is triggered. The simulation results show that the proposed algorithm achieves the same packet reception ratio (PRR) value as the sensing-based algorithm. In addition, per-user power consumption is reduced, and consequently, the energy efficiency is improved by applying the DeTRA algorithm. The research in this study leverages radio resource allocation techniques in LTE based D2D communications to be utilized radio resources more efficiently. In addition, the conducted research paves a way to study further how the power-saving users would optimally select the radio resources with minimum energy consumption in NR V2X communications

Distributed Artificial Intelligence Solution for D2D Communication in 5G Networks

Device to Device (D2D) Communication is one of the technology components of the evolving 5G architecture, as it promises improvements in energy efficiency, spectral efficiency, overall system capacity, and higher data rates. The above noted improvements in network performance spearheaded a vast amount of research in D2D, which have identified significant challenges that need to be addressed before realizing their full potential in emerging 5G Networks. Towards this end, this paper proposes the use of a distributed intelligent approach to control the generation of D2D networks. More precisely, the proposed approach uses Belief-Desire-Intention (BDI) intelligent agents with extended capabilities (BDIx) to manage each D2D node independently and autonomously, without the help of the Base Station. The paper includes detailed algorithmic description for the decision of transmission mode, which maximizes the data rate, minimizes the power consumptions, while taking into consideration the computational load. Simulations show the applicability of BDI agents in jointly solving D2D challenges.Comment: 10 pages,9 figure

Performance enhancement of wireless communication systems through QoS optimisation

Providing quality of service (QoS) in a communication network is essential but challenging, especially when the complexities of wireless and mobile networks are added. The issues of how to achieve the intended performances, such as reliability and efficiency, at the minimal resource cost for wireless communications and networking have not been fully addressed. In this dissertation, we have investigated different data transmission schemes in different wireless communication systems such as wireless sensor network, device-to-device communications and vehicular networks. We have focused on cooperative communications through relaying and proposed a method to maximise the QoS performance by finding optimum transmission schemes. Furthermore, the performance trade-offs that we have identified show that both cooperative and non-cooperative transmission schemes could have advantages as well as disadvantages in offering QoS. In the analytical approach, we have derived the closed-form expressions of the outage probability, throughput and energy efficiency for different transmission schemes in wireless and mobile networks, in addition to applying other QoS metrics such as packet delivery ratio, packet loss rate and average end-to-end delay. We have shown that multi-hop relaying through cooperative communications can outperform non-cooperative transmission schemes in many cases. Furthermore, we have also analysed the optimum required transmission power for different transmission ranges to obtain the maximum energy efficiency or maximum achievable data rate with the minimum outage probability and bit error rate in cellular network. The proposed analytical and modelling approaches are used in wireless sensor networks, device-to-device communications and vehicular networks. The results generated have suggested an adaptive transmission strategy where the system can decide when and how each of transmission schemes should be adopted to achieve the best performance in varied conditions. In addition, the system can also choose proper transmitting power levels under the changing transmission distance to increase and maintain the network reliability and system efficiency accordingly. Consequently, these functions will lead to the optimized QoS in a given network

Efficient Traffic Management Algorithms for the Core Network using Device-to-Device Communication and Edge Caching

Exponentially growing number of communicating devices and the need for faster, more reliable and secure communication are becoming major challenges for current mobile communication architecture. More number of connected devices means more bandwidth and a need for higher Quality of Service (QoS) requirements, which bring new challenges in terms of resource and traffic management. Traffic offload to the edge has been introduced to tackle this demand-explosion that let the core network offload some of the contents to the edge to reduce the traffic congestion. Device-to-Device (D2D) communication and edge caching, has been proposed as promising solutions for offloading data. D2D communication refers to the communication infrastructure where the users in proximity communicate with each other directly. D2D communication improves overall spectral efficiency, however, it introduces additional interference in the system. To enable D2D communication, efficient resource allocation must be introduced in order to minimize the interference in the system and this benefits the system in terms of bandwidth efficiency. In the first part of this thesis, low complexity resource allocation algorithm using stable matching is proposed to optimally assign appropriate uplink resources to the devices in order to minimize interference among D2D and cellular users. Edge caching has recently been introduced as a modification of the caching scheme in the core network, which enables a cellular Base Station (BS) to keep copies of the contents in order to better serve users and enhance Quality of Experience (QoE). However, enabling BSs to cache data on the edge of the network brings new challenges especially on deciding on which and how the contents should be cached. Since users in the same cell may share similar content-needs, we can exploit this temporal-spatial correlation in the favor of caching system which is referred to local content popularity. Content popularity is the most important factor in the caching scheme which helps the BSs to cache appropriate data in order to serve the users more efficiently. In the edge caching scheme, the BS does not know the users request-pattern in advance. To overcome this bottleneck, a content popularity prediction using Markov Decision Process (MDP) is proposed in the second part of this thesis to let the BS know which data should be cached in each time-slot. By using the proposed scheme, core network access request can be significantly reduced and it works better than caching based on historical data in both stable and unstable content popularity