High-performance and Low-power Clock Network Synthesis in the Presence of Variation.

Semiconductor technology scaling requires continuous evolution of all aspects of physical design of integrated circuits. Among the major design steps, clock-network synthesis has been greatly affected by technology scaling, rendering existing methodologies inadequate. Clock routing was previously sufficient for smaller ICs, but design difficulty and structural complexity have greatly increased as interconnect delay and clock frequency increased in the 1990s. Since a clock network directly influences IC performance and often consumes a substantial portion of total power, both academia and industry developed synthesis methodologies to achieve low skew, low power and robustness from PVT variations. Nevertheless, clock network synthesis under tight constraints is currently the least automated step in physical design and requires significant manual intervention, undermining turn-around-time. The need for multi-objective optimization over a large parameter space and the increasing impact of process variation make clock network synthesis particularly challenging. Our work identifies new objectives, constraints and concerns in the clock-network synthesis for systems-on-chips and microprocessors. To address them, we generate novel clock-network structures and propose changes in traditional physical-design flows. We develop new modeling techniques and algorithms for clock power optimization subject to tight skew constraints in the presence of process variations. In particular, we offer SPICE-accurate optimizations of clock networks, coordinated to reduce nominal skew below 5 ps, satisfy slew constraints and trade-off skew, insertion delay and power, while tolerating variations. To broaden the scope of clock-network-synthesis optimizations, we propose new techniques and a methodology to reduce dynamic power consumption by 6.8%-11.6% for large IC designs with macro blocks by integrating clock network synthesis within global placement. We also present a novel non-tree topology that is 2.3x more power-efficient than mesh structures. We fuse several clock trees to create large-scale redundancy in a clock network to bridge the gap between tree-like and mesh-like topologies. Integrated optimization techniques for high-quality clock networks described in this dissertation strong empirical results in experiments with recent industry-released benchmarks in the presence of process variation. Our software implementations were recognized with the first-place awards at the ISPD 2009 and ISPD 2010 Clock-Network Synthesis Contests organized by IBM Research and Intel Research.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/89711/1/ejdjsy_1.pd

Algorithms for the scaling toward nanometer VLSI physical synthesis

Along the history of Very Large Scale Integration (VLSI), we have successfully scaled down the size of transistors, scaled up the speed of integrated circuits (IC) and the number of transistors in a chip - these are just a few examples of our achievement in VLSI scaling. It is projected to enter the nanometer (timing estimation and buffer planning for global routing and other early stages such as floorplanning. A novel path based buffer insertion scheme is also included, which can overcome the weakness of the net based approaches. Part-2 Circuit clustering techniques with the application in Field-Programmable Gate Array (FPGA) technology mapping The problem of timing driven n-way circuit partitioning with application to FPGA technology mapping is studied and a hierarchical clustering approach is presented for the latest multi-level FPGA architectures. Moreover, a more general delay model is included in order to accurately characterize the delay behavior of the clusters and circuit elements

Power Management for Deep Submicron Microprocessors

As VLSI technology scales, the enhanced performance of smaller transistors comes at the expense of increased power consumption. In addition to the dynamic power consumed by the circuits there is a tremendous increase in the leakage power consumption which is further exacerbated by the increasing operating temperatures. The total power consumption of modern processors is distributed between the processor core, memory and interconnects. In this research two novel power management techniques are presented targeting the functional units and the global interconnects. First, since most leakage control schemes for processor functional units are based on circuit level techniques, such schemes inherently lack information about the operational profile of higher-level components of the system. This is a barrier to the pivotal task of predicting standby time. Without this prediction, it is extremely difficult to assess the value of any leakage control scheme. Consequently, a methodology that can predict the standby time is highly beneficial in bridging the gap between the information available at the application level and the circuit implementations. In this work, a novel Dynamic Sleep Signal Generator (DSSG) is presented. It utilizes the usage traces extracted from cycle accurate simulations of benchmark programs to predict the long standby periods associated with the various functional units. The DSSG bases its decisions on the current and previous standby state of the functional units to accurately predict the length of the next standby period. The DSSG presents an alternative to Static Sleep Signal Generation (SSSG) based on static counters that trigger the generation of the sleep signal when the functional units idle for a prespecified number of cycles. The test results of the DSSG are obtained by the use of a modified RISC superscalar processor, implemented by SimpleScalar, the most widely accepted open source vehicle for architectural analysis. In addition, the results are further verified by a Simultaneous Multithreading simulator implemented by SMTSIM. Leakage saving results shows an increase of up to 146% in leakage savings using the DSSG versus the SSSG, with an accuracy of 60-80% for predicting long standby periods. Second, chip designers in their effort to achieve timing closure, have focused on achieving the lowest possible interconnect delay through buffer insertion and routing techniques. This approach, though, taxes the power budget of modern ICs, especially those intended for wireless applications. Also, in order to achieve more functionality, die sizes are constantly increasing. This trend is leading to an increase in the average global interconnect length which, in turn, requires more buffers to achieve timing closure. Unconstrained buffering is bound to adversely affect the overall chip performance, if the power consumption is added as a major performance metric. In fact, the number of global interconnect buffers is expected to reach hundreds of thousands to achieve an appropriate timing closure. To mitigate the impact of the power consumed by the interconnect buffers, a power-efficient multi-pin routing technique is proposed in this research. The problem is based on a graph representation of the routing possibilities, including buffer insertion and identifying the least power path between the interconnect source and set of sinks. The novel multi-pin routing technique is tested by applying it to the ISPD and IBM benchmarks to verify the accuracy, complexity, and solution quality. Results obtained indicate that an average power savings as high as 32% for the 130-nm technology is achieved with no impact on the maximum chip frequency

Sincronização em sistemas integrados a alta velocidade

Doutoramento em Engenharia ElectrotécnicaA distribui ção de um sinal relógio, com elevada precisão espacial (baixo skew) e temporal (baixo jitter ), em sistemas sí ncronos de alta velocidade tem-se revelado uma tarefa cada vez mais demorada e complexa devido ao escalonamento da tecnologia. Com a diminuição das dimensões dos dispositivos e a integração crescente de mais funcionalidades nos Circuitos Integrados (CIs), a precisão associada as transições do sinal de relógio tem sido cada vez mais afectada por varia ções de processo, tensão e temperatura. Esta tese aborda o problema da incerteza de rel ogio em CIs de alta velocidade, com o objetivo de determinar os limites do paradigma de desenho sí ncrono. Na prossecu ção deste objectivo principal, esta tese propõe quatro novos modelos de incerteza com âmbitos de aplicação diferentes. O primeiro modelo permite estimar a incerteza introduzida por um inversor est atico CMOS, com base em parâmetros simples e su cientemente gen éricos para que possa ser usado na previsão das limitações temporais de circuitos mais complexos, mesmo na fase inicial do projeto. O segundo modelo, permite estimar a incerteza em repetidores com liga ções RC e assim otimizar o dimensionamento da rede de distribui ção de relógio, com baixo esfor ço computacional. O terceiro modelo permite estimar a acumula ção de incerteza em cascatas de repetidores. Uma vez que este modelo tem em considera ção a correla ção entre fontes de ruí do, e especialmente util para promover t ecnicas de distribui ção de rel ogio e de alimentação que possam minimizar a acumulação de incerteza. O quarto modelo permite estimar a incerteza temporal em sistemas com m ultiplos dom ínios de sincronismo. Este modelo pode ser facilmente incorporado numa ferramenta autom atica para determinar a melhor topologia para uma determinada aplicação ou para avaliar a tolerância do sistema ao ru ído de alimentação. Finalmente, usando os modelos propostos, são discutidas as tendências da precisão de rel ogio. Conclui-se que os limites da precisão do rel ogio são, em ultima an alise, impostos por fontes de varia ção dinâmica que se preveem crescentes na actual l ogica de escalonamento dos dispositivos. Assim sendo, esta tese defende a procura de solu ções em outros ní veis de abstração, que não apenas o ní vel f sico, que possam contribuir para o aumento de desempenho dos CIs e que tenham um menor impacto nos pressupostos do paradigma de desenho sí ncrono.Distributing a the clock simultaneously everywhere (low skew) and periodically everywhere (low jitter) in high-performance Integrated Circuits (ICs) has become an increasingly di cult and time-consuming task, due to technology scaling. As transistor dimensions shrink and more functionality is packed into an IC, clock precision becomes increasingly a ected by Process, Voltage and Temperature (PVT) variations. This thesis addresses the problem of clock uncertainty in high-performance ICs, in order to determine the limits of the synchronous design paradigm. In pursuit of this main goal, this thesis proposes four new uncertainty models, with di erent underlying principles and scopes. The rst model targets uncertainty in static CMOS inverters. The main advantage of this model is that it depends only on parameters that can easily be obtained. Thus, it can provide information on upcoming constraints very early in the design stage. The second model addresses uncertainty in repeaters with RC interconnects, allowing the designer to optimise the repeater's size and spacing, for a given uncertainty budget, with low computational e ort. The third model, can be used to predict jitter accumulation in cascaded repeaters, like clock trees or delay lines. Because it takes into consideration correlations among variability sources, it can also be useful to promote oorplan-based power and clock distribution design in order to minimise jitter accumulation. A fourth model is proposed to analyse uncertainty in systems with multiple synchronous domains. It can be easily incorporated in an automatic tool to determine the best topology for a given application or to evaluate the system's tolerance to power-supply noise. Finally, using the proposed models, this thesis discusses clock precision trends. Results show that limits in clock precision are ultimately imposed by dynamic uncertainty, which is expected to continue increasing with technology scaling. Therefore, it advocates the search for solutions at other abstraction levels, and not only at the physical level, that may increase system performance with a smaller impact on the assumptions behind the synchronous design paradigm