1,484 research outputs found
Massive MIMO Multicasting in Noncooperative Cellular Networks
We study the massive multiple-input multiple-output (MIMO) multicast
transmission in cellular networks where each base station (BS) is equipped with
a large-scale antenna array and transmits a common message using a single
beamformer to multiple mobile users. We first show that when each BS knows the
perfect channel state information (CSI) of its own served users, the
asymptotically optimal beamformer at each BS is a linear combination of the
channel vectors of its multicast users. Moreover, the optimal combining
coefficients are obtained in closed form. Then we consider the imperfect CSI
scenario where the CSI is obtained through uplink channel estimation in
timedivision duplex systems. We propose a new pilot scheme that estimates the
composite channel which is a linear combination of the individual channels of
multicast users in each cell. This scheme is able to completely eliminate pilot
contamination. The pilot power control for optimizing the multicast beamformer
at each BS is also derived. Numerical results show that the asymptotic
performance of the proposed scheme is close to the ideal case with perfect CSI.
Simulation also verifies the effectiveness of the proposed scheme with finite
number of antennas at each BS.Comment: to appear in IEEE JSAC Special Issue on 5G Wireless Communication
System
On the Performance of MRC Receiver with Unknown Timing Mismatch-A Large Scale Analysis
There has been extensive research on large scale multi-user multiple-input
multiple-output (MU-MIMO) systems recently. Researchers have shown that there
are great opportunities in this area, however, there are many obstacles in the
way to achieve full potential of using large number of receive antennas. One of
the main issues, which will be investigated thoroughly in this paper, is timing
asynchrony among signals of different users. Most of the works in the
literature, assume that received signals are perfectly aligned which is not
practical. We show that, neglecting the asynchrony can significantly degrade
the performance of existing designs, particularly maximum ratio combining
(MRC). We quantify the uplink achievable rates obtained by MRC receiver with
perfect channel state information (CSI) and imperfect CSI while the system is
impaired by unknown time delays among received signals. We then use these
results to design new algorithms in order to alleviate the effects of timing
mismatch. We also analyze the performance of introduced receiver design, which
is called MRC-ZF, with perfect and imperfect CSI. For performing MRC-ZF, the
only required information is the distribution of timing mismatch which
circumvents the necessity of time delay acquisition or synchronization. To
verify our analytical results, we present extensive simulation results which
thoroughly investigate the performance of the traditional MRC receiver and the
introduced MRC-ZF receiver
Massive MIMO for Internet of Things (IoT) Connectivity
Massive MIMO is considered to be one of the key technologies in the emerging
5G systems, but also a concept applicable to other wireless systems. Exploiting
the large number of degrees of freedom (DoFs) of massive MIMO essential for
achieving high spectral efficiency, high data rates and extreme spatial
multiplexing of densely distributed users. On the one hand, the benefits of
applying massive MIMO for broadband communication are well known and there has
been a large body of research on designing communication schemes to support
high rates. On the other hand, using massive MIMO for Internet-of-Things (IoT)
is still a developing topic, as IoT connectivity has requirements and
constraints that are significantly different from the broadband connections. In
this paper we investigate the applicability of massive MIMO to IoT
connectivity. Specifically, we treat the two generic types of IoT connections
envisioned in 5G: massive machine-type communication (mMTC) and ultra-reliable
low-latency communication (URLLC). This paper fills this important gap by
identifying the opportunities and challenges in exploiting massive MIMO for IoT
connectivity. We provide insights into the trade-offs that emerge when massive
MIMO is applied to mMTC or URLLC and present a number of suitable communication
schemes. The discussion continues to the questions of network slicing of the
wireless resources and the use of massive MIMO to simultaneously support IoT
connections with very heterogeneous requirements. The main conclusion is that
massive MIMO can bring benefits to the scenarios with IoT connectivity, but it
requires tight integration of the physical-layer techniques with the protocol
design.Comment: Submitted for publicatio
Random Access Protocols for Massive MIMO
5G wireless networks are expected to support new services with stringent
requirements on data rates, latency and reliability. One novel feature is the
ability to serve a dense crowd of devices, calling for radically new ways of
accessing the network. This is the case in machine-type communications, but
also in urban environments and hotspots. In those use cases, the high number of
devices and the relatively short channel coherence interval do not allow
per-device allocation of orthogonal pilot sequences. This article motivates the
need for random access by the devices to pilot sequences used for channel
estimation, and shows that Massive MIMO is a main enabler to achieve fast
access with high data rates, and delay-tolerant access with different data rate
levels. Three pilot access protocols along with data transmission protocols are
described, fulfilling different requirements of 5G services
A Coordinated Approach to Channel Estimation in Large-scale Multiple-antenna Systems
This paper addresses the problem of channel estimation in multi-cell
interference-limited cellular networks. We consider systems employing multiple
antennas and are interested in both the finite and large-scale antenna number
regimes (so-called "massive MIMO"). Such systems deal with the multi-cell
interference by way of per-cell beamforming applied at each base station.
Channel estimation in such networks, which is known to be hampered by the pilot
contamination effect, constitute a major bottleneck for overall performance. We
present a novel approach which tackles this problem by enabling a low-rate
coordination between cells during the channel estimation phase itself. The
coordination makes use of the additional second-order statistical information
about the user channels, which are shown to offer a powerful way of
discriminating across interfering users with even strongly correlated pilot
sequences. Importantly, we demonstrate analytically that in the
large-number-of-antennas regime, the pilot contamination effect is made to
vanish completely under certain conditions on the channel covariance. Gains
over the conventional channel estimation framework are confirmed by our
simulations for even small antenna array sizes.Comment: 10 pages, 6 figures, to appear in IEEE Journal on Selected Areas in
Communication
Downlink Training in Cell-Free Massive MIMO: A Blessing in Disguise
Cell-free Massive MIMO (multiple-input multiple-output) refers to a
distributed Massive MIMO system where all the access points (APs) cooperate to
coherently serve all the user equipments (UEs), suppress inter-cell
interference and mitigate the multiuser interference. Recent works demonstrated
that, unlike co-located Massive MIMO, the \textit{channel hardening} is, in
general, less pronounced in cell-free Massive MIMO, thus there is much to
benefit from estimating the downlink channel. In this study, we investigate the
gain introduced by the downlink beamforming training, extending the previously
proposed analysis to non-orthogonal uplink and downlink pilots. Assuming
single-antenna APs, conjugate beamforming and independent Rayleigh fading
channel, we derive a closed-form expression for the per-user achievable
downlink rate that addresses channel estimation errors and pilot contamination
both at the AP and UE side. The performance evaluation includes max-min
fairness power control, greedy pilot assignment methods, and a comparison
between achievable rates obtained from different capacity-bounding techniques.
Numerical results show that downlink beamforming training, although increases
pilot overhead and introduces additional pilot contamination, improves
significantly the achievable downlink rate. Even for large number of APs, it is
not fully efficient for the UE relying on the statistical channel state
information for data decoding.Comment: Published in IEEE Transactions on Wireless Communications on August
14, 2019. {\copyright} 2019 IEEE. Personal use of this material is permitted.
Permission from IEEE must be obtained for all other use
- …