Performance Evaluation of Adaptive Continuous Wavelet Transform based Rake Receiver for UWB Systems

This paper proposes an adaptive continuous wavelet transform (ACWT) based Rake receiver to mitigate interference for high speed ultra wideband (UWB) transmission. The major parts of the receiver are least mean square (LMS) adaptive equalizer and N-selective maximum ratio combiner (MRC). The main advantage of using continuous wavelet rake receiver is that it utilizes the maximum bandwidth (7.5GHz) of the UWB transmitted signal, as announced by the Federal Communication Commission (FCC). In the proposed ACWT Rake receiver, the weights and the finger positions are updated depending upon the convergence error over a period in which training data is transmitted. Line of sight (LOS) channel model (CM1 from 0 to 4 meters) and the Non line of sight (NLOS) channel models (CM, CM3 and CM4) are the indoor channel models selected for investigating in this research . The performance of the proposed adaptive system   is evaluated by comparing with conventional rake and continuous wavelet transform (CWT) based rake. It showed an improved performance in all the different UWB channels (CM1 to CM4) for rake fingers of 2, 4 and 8. Simulations showed that for 8 rake fingers, the proposed adaptive CWT rake receiver has shown an SNR improvement of 2dB, 3dB, 10dB and 2dB respectively over CWT rake receiver in different UWB channels CM1, CM2, CM3 and CM4

A low-cost time-hopping impulse radio system for high data rate transmission

We present an efficient, low-cost implementation of time-hopping impulse radio that fulfills the spectral mask mandated by the FCC and is suitable for high-data-rate, short-range communications. Key features are: (i) all-baseband implementation that obviates the need for passband components, (ii) symbol-rate (not chip rate) sampling, A/D conversion, and digital signal processing, (iii) fast acquisition due to novel search algorithms, (iv) spectral shaping that can be adapted to accommodate different spectrum regulations and interference environments. Computer simulations show that this system can provide 110Mbit/s at 7-10m distance, as well as higher data rates at shorter distances under FCC emissions limits. Due to the spreading concept of time-hopping impulse radio, the system can sustain multiple simultaneous users, and can suppress narrowband interference effectively.Comment: To appear in EURASIP Journal on Applied Signal Processing (Special Issue on UWB - State of the Art

Ultra-wideband systems with orthogonal coded differential TR receiver

U ovom je radu predstavljen kodirani diferencijalni TR (cDTR) prijemnik koji mapiranjem informacije u K različitih ortogonalnih kodova omogućuje prijenos dodatnog bita. Svojstva kodiranog DTR-a su analizirana i uspoređena s konvencionalnim DTR-om. Kroz analizu je dana ocjena svojstva prijemnika u smislu vjerojatnosti pogreške bita (BEP), brzine prijenosa i složenosti prijemnika. Rezultati su pokazali da kodirani DTR uz isti BEP omogućuje veću brzinu prijenosa od konvencionalnog DTR-a. Osim toga, razmotrena je i sklopovska složenost prijemnika.This paper presents coded differential TR (cDTR) receiver that transmits extra bit by mapping information in K different orthogonal codes. The performance of the coded DTR is analyzed and compared with the conventional DTR. Throughout the analysis, the performance of receivers in terms of bit error probability (BEP), data rate and receiver complexity are assessed. The results show that coded DTR is able to outperform conventional DTR receiver in terms of data rate maintaining the same BEP. Additionally, the receiver hardware complexity issue is discussed

Iterative ('Turbo') Multiuser Detectors For Impulse Radio Systems

In recent years, there has been a growing interest in multiple access communication systems that spread their transmitted energy over very large bandwidths. These systems, which are referred to as ultra wide-band (UWB) systems, have various advantages over narrow-band and conventional wide-band systems. The importance of multiuser detection for achieving high data or low bit error rates in these systems has already been established in several studies. This paper presents iterative ('turbo') multiuser detection for impulse radio (IR) UWB systems over multipath channels. While this approach is demonstrated for UWB signals, it can also be used in other systems that use similar types of signaling. When applied to the type of signals used by UWB systems, the complexity of the proposed detector can be quite low. Also, two very low complexity implementations of the iterative multiuser detection scheme are proposed based on Gaussian approximation and soft interference cancellation. The performance of these detectors is assessed using simulations that demonstrate their favorable properties.Comment: To appear in IEEE Transactions on Wireless Communication

An enhanced pulse position modulation (PPM) in ultra-wideband (UWB) systems

Simplicity, transmission rate, and bit error rate (BER) performance are three major concerns for ultra-wideband (UWB) systems. The main advantage of existing pulse-position modulation (PPM) schemes is simplicity, but their BER performance is poorer than that of an on-off-keying (OOK) modulation scheme, and their transmission rate is lower than that of an OOK scheme. In this research project, I will explore a novel PPM scheme, which can maintain the simplicity of the PPM schemes as well as achieve a BER performance and a transmission rate similar to the OOK scheme. During the research, I will thoroughly investigate the relationship between pulse position allocation and the BER performance and the transmission rate of UWB systems through computer simulations and theoretical analysis, and develop a whole set of design rules for the novel PPM scheme