18 research outputs found
Soft handover issues in radio resource management for 3G WCDMA networks
PhDMobile terminals allow users to access services while on the move. This unique
feature has driven the rapid growth in the mobile network industry, changing it from a
new technology into a massive industry within less than two decades.
Handover is the essential functionality for dealing with the mobility of the mobile
users. Compared with the conventional hard handover employed in the GSM mobile
networks, the soft handover used in IS-95 and being proposed for 3G has better
performance on both link and system level.
Previous work on soft handover has led to several algorithms being proposed and
extensive research has been conducted on the performance analysis and parameters
optimisation of these algorithms. Most of the previous analysis focused on the uplink
direction. However, in future mobile networks, the downlink is more likely to be the
bottleneck of the system capacity because of the asymmetric nature of new services,
such as Internet traffic.
In this thesis, an in-depth study of the soft handover effects on the downlink
direction of WCDMA networks is carried out, leading to a new method of optimising
soft handover for maximising the downlink capacity and a new power control
approach
Capacity Analysis in Downlink WCDMA Systems Using Soft Handover Techniques With SIR-Based Power Control and Site Selection Diversity Transmission
This work analyzes the downlink performance of a WCDMA system with
site selection diversity transmission power control (SSDT) during soft handover mode. Signal to
interference ratio (SIR) power control techniques are modeled and used in the simulations of this
analysis. The study is focused on finding the optimum soft handover margin in terms of
maximum system capacity under energy-per-bit to noise spectral density ratio (Eb/N0) quality
requirements. The results of this analysis show an increase in user capacity of about 15 -20 % for
optimum soft handover margins of 5 â 5.5 dB. Nevertheless, the resources required (number of
scrambling codes) by base station increase faster than the number of active users in terms of soft
handover margin up to soft handover margin values of approximately 9.5 dB.Reig, J. (2006). Capacity Analysis in Downlink WCDMA Systems Using Soft Handover Techniques With SIR-Based Power Control and Site Selection Diversity Transmission. IEEE Transactions on Vehicular Technology. 55(4):1362-1372. doi:10.1109/TVT.2006.877705S1362137255
Recommended from our members
Capacity and Throughput Optimization in Multi-cell 3G WCDMA Networks
User modeling enables in the computation of the traffic density in a cellular network, which can be used to optimize the placement of base stations and radio network controllers as well as to analyze the performance of resource management algorithms towards meeting the final goal: the calculation and maximization of network capacity and throughput for different data rate services. An analytical model is presented for approximating the user distributions in multi-cell third generation wideband code division multiple access (WCDMA) networks using 2-dimensional Gaussian distributions by determining the means and the standard deviations of the distributions for every cell. This model allows for the calculation of the inter-cell interference and the reverse-link capacity of the network. An analytical model for optimizing capacity in multi-cell WCDMA networks is presented. Capacity is optimized for different spreading factors and for perfect and imperfect power control. Numerical results show that the SIR threshold for the received signals is decreased by 0.5 to 1.5 dB due to the imperfect power control. The results also show that the determined parameters of the 2-dimensional Gaussian model match well with traditional methods for modeling user distribution. A call admission control algorithm is designed that maximizes the throughput in multi-cell WCDMA networks. Numerical results are presented for different spreading factors and for several mobility scenarios. Our methods of optimizing capacity and throughput are computationally efficient, accurate, and can be implemented in large WCDMA networks
Radio Communications
In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modiïŹed our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the ïŹeld of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks
Recommended from our members
Application priority framework for fixed mobile converged communication networks
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The current prospects in wired and wireless access networks, it is becoming increasingly important to address potential convergence in order to offer integrated broadband services. These systems will need to offer higher data transmission capacities and long battery life, which is the catalyst for an everincreasing variety of air interface technologies targeting local area to wide area connectivity. Current integrated industrial networks do not offer application aware context delivery and enhanced services for optimised networks. Application aware services provide value-added functionality to business applications by capturing, integrating, and consolidating intelligence about users and their endpoint devices from various points in the network. This thesis mainly intends to resolve the issues related to ubiquitous application aware service, fair allocation of radio access, reduced energy consumption and improved capacity. A technique that measures and evaluates the data rate demand to reduce application response time and queuing delay for multi radio interfaces is proposed. The technique overcomes the challenges of network integration, requiring no user intervention, saving battery life and selecting the radio access connection for the application requested by the end user. This study is split in two parts. The first contribution identifies some constraints of the services towards the application layer in terms of e.g. data rate and signal strength. The objectives are achieved by application controlled handover (ACH) mechanism in order to maintain acceptable data rate for real-time application services. It also looks into the impact of the radio link on the application and identifies elements and parameters like wireless link quality and handover that will influence the application type. It also identifies some enhanced traditional mechanisms such as distance controlled multihop and mesh topology required in order to support energy efficient multimedia applications. The second contribution unfolds an intelligent application priority assignment mechanism (IAPAM) for medical applications using wireless sensor networks. IAPAM proposes and evaluates a technique based on prioritising multiple virtual queues for the critical nature of medical data to improve instant transmission. Various mobility patterns (directed, controlled and random waypoint) has been investigated and compared by simulating IAPAM enabled mobile BWSN. The following topics have been studied, modelled, simulated and discussed in this thesis: 1. Application Controlled Handover (ACH) for multi radios over fibre 2. Power Controlled Scheme for mesh multi radios over fibre using ACH 3. IAPAM for Biomedical Wireless Sensor Networks (BWSN) and impact of mobility over IAPAM enabled BWSN. Extensive simulation studies are performed to analyze and to evaluate the proposed techniques. Simulation results demonstrate significant improvements in multi radios over fibre performance in terms of application response delay and power consumption by upto 75% and 15 % respectively, reduction in traffic loss by upto 53% and reduction in delay for real time application by more than 25% in some cases
Macroscopic Diversity Applications of Mult-input Multi-output (Mimo) Systems for Broadband Mobile Communication
Electrical Engineerin
Final report on the evaluation of RRM/CRRM algorithms
Deliverable public del projecte EVERESTThis deliverable provides a definition and a complete evaluation of the RRM/CRRM algorithms selected in D11 and D15, and evolved and refined on an iterative process. The evaluation will be carried out by means of simulations using the simulators provided at D07, and D14.Preprin
Quality of service and mobility management in IP-based radio access networks
Master'sMASTER OF ENGINEERIN