MM-Wave HetNet in 5G and beyond Cellular Networks Reinforcement Learning Method to improve QoS and Exploiting Path Loss Model

This paper presents High density heterogeneous networks (HetNet) which are the most promising technology for the fifth generation (5G) cellular network. Since 5G will be available for a long time, previous generation networking systems will need customization and updates. We examine the merits and drawbacks of legacy and Q-Learning (QL)-based adaptive resource allocation systems. Furthermore, various comparisons between methods and schemes are made for the purpose of evaluating the solutions for future generation. Microwave macro cells are used to enable extra high capacity such as Long-Term Evolution (LTE), eNodeB (eNB), and Multimedia Communications Wireless technology (MC), in which they are most likely to be deployed. This paper also presents four scenarios for 5G mm-Wave implementation, including proposed system architectures. The WL algorithm allocates optimal power to the small cell base station (SBS) to satisfy the minimum necessary capacity of macro cell user equipment (MUEs) and small cell user equipment (SCUEs) in order to provide quality of service (QoS) (SUEs). The challenges with dense HetNet and the massive backhaul traffic they generate are discussed in this study. Finally, a core HetNet design based on clusters is aimed at reducing backhaul traffic. According to our findings, MM-wave HetNet and MEC can be useful in a wide range of applications, including ultra-high data rate and low latency communications in 5G and beyond. We also used the channel model simulator to examine the directional power delay profile with received signal power, path loss, and path loss exponent (PLE) for both LOS and NLOS using uniform linear array (ULA) 2X2 and 64x16 antenna configurations at 38 GHz and 73 GHz mmWave bands for both LOS and NLOS (NYUSIM). The simulation results show the performance of several path loss models in the mmWave and sub-6 GHz bands. The path loss in the close-in (CI) model at mmWave bands is higher than that of open space and two ray path loss models because it considers all shadowing and reflection effects between transmitter and receiver. We also compared the suggested method to existing models like Amiri, Su, Alsobhi, Iqbal, and greedy (non adaptive), and found that it not only enhanced MUE and SUE minimum capacities and reduced BT complexity, but it also established a new minimum QoS threshold. We also talked about 6G researches in the future. When compared to utilizing the dual slope route loss model alone in a hybrid heterogeneous network, our simulation findings show that decoupling is more visible when employing the dual slope path loss model, which enhances system performance in terms of coverage and data rate

Optimizing the stochastic deployment of small base stations in an interleave division multiple access-based heterogeneous cellular networks

The use of small base stations (SBSs) to improve the throughput of cellular networks gave rise to the advent of heterogeneous cellular networks (HCNs). Still, the interleave division multiple access (IDMA) performance in sleep mode active HCNs has not been studied in the existing literature. This research examines the 24-h throughput, spectral efficiency (SE), and energy efficiency (EE) of an IDMA-based HCN and compares the result with orthogonal frequency division multiple access (OFDMA). An energy-spectral-efficiency (ESE) model of a two-tier HCN was developed. A weighted sum modified particle swarm optimization (PSO) algorithm simultaneously maximized the SE and EE of the IDMA-based HCN. The result obtained showed that the IDMA performs at least 68% better than the OFDMA on the throughput metric. The result also showed that the particle swarm optimization algorithm produced the Pareto optimal front at moderate traffic levels for all varied network parameters of SINR threshold, SBS density, and sleep mode technique. The IDMA-based HCN can improve the throughput, SE, and EE via sleep mode techniques. Still, the combination of network parameters that simultaneously maximize the SE and EE is interference limited. In sleep mode, the performance of the HCN is better if the SBSs can adapt to spatial and temporal variations in network traffic.publishedVersio

A Review of Wireless Sensor Networks with Cognitive Radio Techniques and Applications

The advent of Wireless Sensor Networks (WSNs) has inspired various sciences and telecommunication with its applications, there is a growing demand for robust methodologies that can ensure extended lifetime. Sensor nodes are small equipment which may hold less electrical energy and preserve it until they reach the destination of the network. The main concern is supposed to carry out sensor routing process along with transferring information. Choosing the best route for transmission in a sensor node is necessary to reach the destination and conserve energy. Clustering in the network is considered to be an effective method for gathering of data and routing through the nodes in wireless sensor networks. The primary requirement is to extend network lifetime by minimizing the consumption of energy. Further integrating cognitive radio technique into sensor networks, that can make smart choices based on knowledge acquisition, reasoning, and information sharing may support the network's complete purposes amid the presence of several limitations and optimal targets. This examination focuses on routing and clustering using metaheuristic techniques and machine learning because these characteristics have a detrimental impact on cognitive radio wireless sensor node lifetime

Potential of machine learning/Artificial Intelligence (ML/AI) for verifying configurations of 5G multi Radio Access Technology (RAT) base station

Abstract. The enhancements in mobile networks from 1G to 5G have greatly increased data transmission reliability and speed. However, concerns with 5G must be addressed. As system performance and reliability improve, ML and AI integration in products and services become more common. The integration teams in cellular network equipment creation test devices from beginning to end to ensure hardware and software parts function correctly. Radio unit integration is typically the first integration phase, where the radio is tested independently without additional network components like the BBU and UE. 5G architecture and the technology that it is using are explained further. The architecture defined by 3GPP for 5G differs from previous generations, using Network Functions (NFs) instead of network entities. This service-based architecture offers NF reusability to reduce costs and modularity, allowing for the best vendor options for customer radio products. 5G introduced the O-RAN concept to decompose the RAN architecture, allowing for increased speed, flexibility, and innovation. NG-RAN provided this solution to speed up the development and implementation process of 5G. The O-RAN concept aims to improve the efficiency of RAN by breaking it down into components, allowing for more agility and customization. The four protocols, the eCPRI interface, and the functionalities of fronthaul that NGRAN follows are expressed further. Additionally, the significance of NR is described with an explanation of its benefits. Some benefits are high data rates, lower latency, improved spectral efficiency, increased network flexibility, and improved energy efficiency. The timeline for 5G development is provided along with different 3GPP releases. Stand-alone and non-stand-alone architecture is integral while developing the 5G architecture; hence, it is also defined with illustrations. The two frequency bands that NR utilizes, FR1 and FR2, are expressed further. FR1 is a sub-6 GHz frequency band. It contains frequencies of low and high values; on the other hand, FR2 contains frequencies above 6GHz, comprising high frequencies. FR2 is commonly known as the mmWave band. Data collection for implementing the ML approaches is expressed that contains the test setup, data collection, data description, and data visualization part of the thesis work. The Test PC runs tests, executes test cases using test libraries, and collects data from various logs to analyze the system’s performance. The logs contain information about the test results, which can be used to identify issues and evaluate the system’s performance. The data collection part describes that the data was initially present in JSON files and extracted from there. The extraction took place using the Python code script and was then fed into an Excel sheet for further analysis. The data description explains the parameters that are taken while training the models. Jupyter notebook has been used for visualizing the data, and the visualization is carried out with the help of graphs. Moreover, the ML techniques used for analyzing the data are described. In total, three methods are used here. All the techniques come under the category of supervised learning. The explained models are random forest, XG Boost, and LSTM. These three models form the basis of ML techniques applied in the thesis. The results and discussion section explains the outcomes of the ML models and discusses how the thesis will be used in the future. The results include the parameters that are considered to apply the ML models to them. SINR, noise power, rxPower, and RSSI are the metrics that are being monitored. These parameters have variance, which is essential in evaluating the quality of the product test setup, the quality of the software being tested, and the state of the test environment. The discussion section of the thesis explains why the following parameters are taken, which ML model is most appropriate for the data being analyzed, and what the next steps are in implementation

GNOSIS: Global Network Operations Status Information System

Monitoring the global state of a network is a continuing challenge for network operators and users. It has become still harder with increases in scale and heterogeneity. Monitoring requires status information for each node and to construct the global picture at a monitoring point. GNOSIS, the Global Network Operations Status Information System, achieves a global view by careful extraction and presentation of locally available node data. The GNOSIS model improves on the traditional polling model of monitoring schemes by 1.) collecting accurate data 2.) decreasing the granularity with which network applications can detect change in the network and 3.) displaying status information in near real-time. We define the Network Snapshot as the basic unit of information capture and display in GNOSIS. A Network Snapshot is a visualization of locally available state collected during a common time interval. A sequence of these Network Snapshots over time represent the evolution of network state. In this paper, we motivate the need for a network monitoring system that can detect global problems, in spite of both scale and heterogeneity. We present three design criteria, Accuracy, Continuity and Timeliness for a global monitoring system. Finally, we present the GNOSIS architecture and demonstrate how it better detects network problems which are currently of concern. The goal of GNOSIS is to present a stream of consistent, accurate local data in a timely manner

An overview of VANET vehicular networks

Today, with the development of intercity and metropolitan roadways and with various cars moving in various directions, there is a greater need than ever for a network to coordinate commutes. Nowadays, people spend a lot of time in their vehicles. Smart automobiles have developed to make that time safer, more effective, more fun, pollution-free, and affordable. However, maintaining the optimum use of resources and addressing rising needs continues to be a challenge given the popularity of vehicle users and the growing diversity of requests for various services. As a result, VANET will require modernized working practices in the future. Modern intelligent transportation management and driver assistance systems are created using cutting-edge communication technology. Vehicular Ad-hoc networks promise to increase transportation effectiveness, accident prevention, and pedestrian comfort by allowing automobiles and road infrastructure to communicate entertainment and traffic information. By constructing thorough frameworks, workflow patterns, and update procedures, including block-chain, artificial intelligence, and SDN (Software Defined Networking), this paper addresses VANET-related technologies, future advances, and related challenges. An overview of the VANET upgrade solution is given in this document in order to handle potential future problems

A survey on intelligent computation offloading and pricing strategy in UAV-Enabled MEC network: Challenges and research directions

The lack of resource constraints for edge servers makes it difficult to simultaneously perform a large number of Mobile Devices’ (MDs) requests. The Mobile Network Operator (MNO) must then select how to delegate MD queries to its Mobile Edge Computing (MEC) server in order to maximize the overall benefit of admitted requests with varying latency needs. Unmanned Aerial Vehicles (UAVs) and Artificial Intelligent (AI) can increase MNO performance because of their flexibility in deployment, high mobility of UAV, and efficiency of AI algorithms. There is a trade-off between the cost incurred by the MD and the profit received by the MNO. Intelligent computing offloading to UAV-enabled MEC, on the other hand, is a promising way to bridge the gap between MDs' limited processing resources, as well as the intelligent algorithms that are utilized for computation offloading in the UAV-MEC network and the high computing demands of upcoming applications. This study looks at some of the research on the benefits of computation offloading process in the UAV-MEC network, as well as the intelligent models that are utilized for computation offloading in the UAV-MEC network. In addition, this article examines several intelligent pricing techniques in different structures in the UAV-MEC network. Finally, this work highlights some important open research issues and future research directions of Artificial Intelligent (AI) in computation offloading and applying intelligent pricing strategies in the UAV-MEC network

Fault diagnosis for IP-based network with real-time conditions

BACKGROUND: Fault diagnosis techniques have been based on many paradigms, which derive from diverse areas and have different purposes: obtaining a representation model of the network for fault localization, selecting optimal probe sets for monitoring network devices, reducing fault detection time, and detecting faulty components in the network. Although there are several solutions for diagnosing network faults, there are still challenges to be faced: a fault diagnosis solution needs to always be available and able enough to process data timely, because stale results inhibit the quality and speed of informed decision-making. Also, there is no non-invasive technique to continuously diagnose the network symptoms without leaving the system vulnerable to any failures, nor a resilient technique to the network's dynamic changes, which can cause new failures with different symptoms. AIMS: This thesis aims to propose a model for the continuous and timely diagnosis of IP-based networks faults, independent of the network structure, and based on data analytics techniques. METHOD(S): This research's point of departure was the hypothesis of a fault propagation phenomenon that allows the observation of failure symptoms at a higher network level than the fault origin. Thus, for the model's construction, monitoring data was collected from an extensive campus network in which impact link failures were induced at different instants of time and with different duration. These data correspond to widely used parameters in the actual management of a network. The collected data allowed us to understand the faults' behavior and how they are manifested at a peripheral level. Based on this understanding and a data analytics process, the first three modules of our model, named PALADIN, were proposed (Identify, Collection and Structuring), which define the data collection peripherally and the necessary data pre-processing to obtain the description of the network's state at a given moment. These modules give the model the ability to structure the data considering the delays of the multiple responses that the network delivers to a single monitoring probe and the multiple network interfaces that a peripheral device may have. Thus, a structured data stream is obtained, and it is ready to be analyzed. For this analysis, it was necessary to implement an incremental learning framework that respects networks' dynamic nature. It comprises three elements, an incremental learning algorithm, a data rebalancing strategy, and a concept drift detector. This framework is the fourth module of the PALADIN model named Diagnosis. In order to evaluate the PALADIN model, the Diagnosis module was implemented with 25 different incremental algorithms, ADWIN as concept-drift detector and SMOTE (adapted to streaming scenario) as the rebalancing strategy. On the other hand, a dataset was built through the first modules of the PALADIN model (SOFI dataset), which means that these data are the incoming data stream of the Diagnosis module used to evaluate its performance. The PALADIN Diagnosis module performs an online classification of network failures, so it is a learning model that must be evaluated in a stream context. Prequential evaluation is the most used method to perform this task, so we adopt this process to evaluate the model's performance over time through several stream evaluation metrics. RESULTS: This research first evidences the phenomenon of impact fault propagation, making it possible to detect fault symptoms at a monitored network's peripheral level. It translates into non-invasive monitoring of the network. Second, the PALADIN model is the major contribution in the fault detection context because it covers two aspects. An online learning model to continuously process the network symptoms and detect internal failures. Moreover, the concept-drift detection and rebalance data stream components which make resilience to dynamic network changes possible. Third, it is well known that the amount of available real-world datasets for imbalanced stream classification context is still too small. That number is further reduced for the networking context. The SOFI dataset obtained with the first modules of the PALADIN model contributes to that number and encourages works related to unbalanced data streams and those related to network fault diagnosis. CONCLUSIONS: The proposed model contains the necessary elements for the continuous and timely diagnosis of IPbased network faults; it introduces the idea of periodical monitorization of peripheral network elements and uses data analytics techniques to process it. Based on the analysis, processing, and classification of peripherally collected data, it can be concluded that PALADIN achieves the objective. The results indicate that the peripheral monitorization allows diagnosing faults in the internal network; besides, the diagnosis process needs an incremental learning process, conceptdrift detection elements, and rebalancing strategy. The results of the experiments showed that PALADIN makes it possible to learn from the network manifestations and diagnose internal network failures. The latter was verified with 25 different incremental algorithms, ADWIN as concept-drift detector and SMOTE (adapted to streaming scenario) as the rebalancing strategy. This research clearly illustrates that it is unnecessary to monitor all the internal network elements to detect a network's failures; instead, it is enough to choose the peripheral elements to be monitored. Furthermore, with proper processing of the collected status and traffic descriptors, it is possible to learn from the arriving data using incremental learning in cooperation with data rebalancing and concept drift approaches. This proposal continuously diagnoses the network symptoms without leaving the system vulnerable to failures while being resilient to the network's dynamic changes.Programa de Doctorado en Ciencia y Tecnología Informática por la Universidad Carlos III de MadridPresidente: José Manuel Molina López.- Secretario: Juan Carlos Dueñas López.- Vocal: Juan Manuel Corchado Rodrígue

A Centralized Energy Management System for Wireless Sensor Networks

This document presents the Centralized Energy Management System (CEMS), a dynamic fault-tolerant reclustering protocol for wireless sensor networks. CEMS reconfigures a homogeneous network both periodically and in response to critical events (e.g. cluster head death). A global TDMA schedule prevents costly retransmissions due to collision, and a genetic algorithm running on the base station computes cluster assignments in concert with a head selection algorithm. CEMS\u27 performance is compared to the LEACH-C protocol in both normal and failure-prone conditions, with an emphasis on each protocol\u27s ability to recover from unexpected loss of cluster heads