Semi-persistent RRC protocol for machine-type communication devices in LTE networks

In this paper, we investigate the design of a radio resource control (RRC) protocol in the framework of long-term evolution (LTE) of the 3rd Generation Partnership Project regarding provision of low cost/complexity and low energy consumption machine-type communication (MTC), which is an enabling technology for the emerging paradigm of the Internet of Things. Due to the nature and envisaged battery-operated long-life operation of MTC devices without human intervention, energy efficiency becomes extremely important. This paper elaborates the state-of-the-art approaches toward addressing the challenge in relation to the low energy consumption operation of MTC devices, and proposes a novel RRC protocol design, namely, semi-persistent RRC state transition (SPRST), where the RRC state transition is no longer triggered by incoming traffic but depends on pre-determined parameters based on the traffic pattern obtained by exploiting the network memory. The proposed RRC protocol can easily co-exist with the legacy RRC protocol in the LTE. The design criterion of SPRST is derived and the signalling procedure is investigated accordingly. Based upon the simulation results, it is shown that the SPRST significantly reduces both the energy consumption and the signalling overhead while at the same time guarantees the quality of service requirements

A comprehensive simulation analysis of LTE Discontinuous Reception (DRX)

In an LTE cell, Discontinuous Reception (DRX) allows the central base station to configure User Equipments for periodic wake/sleep cycles, so as to save energy. DRX operations depend on several parameters, which can be tuned to achieve optimal performance with different traffic profiles (i.e., CBR vs. bursty, periodic vs. sporadic, etc.). This work investigates how to configure these parameters and explores the trade-off between power saving, on one side, and per-user QoS, on the other. Unlike previous work, chiefly based on analytical models neglecting key aspects of LTE, our evaluation is carried out via simulation. We use a fully-fledged packet simulator, which includes models of all the protocol stack, the applications and the relevant QoS metrics, and employ factorial analysis to assess the impact of the many simulation factors in a statistically rigorous way. This allows us to analyze a wider spectrum of scenarios, assessing the interplay of the LTE mechanisms and DRX, and to derive configuration guidelines

System-level analysis of the tradeoffs between power saving and capacity/QoS with DRX in LTE

In an LTE cell, Discontinuous Reception (DRX) allows the central base station to configure User Equipment for periodic wake/sleep cycles, so as to save energy. Several parameters are associated to DRX operations, thus allowing for optimal performance with different traffic profiles (i.e., CBR-like, bursty, periodic arrivals of variable-sized packets, etc.). This work investigates how to configure these parameters and explores the tradeoff between power saving, on one side, and per-user QoS and cell capacity, on the other. Unlike previous work, mostly based on analytical models neglecting key aspects of LTE, our evaluation is carried out using a fully-fledged packet simulator. This allows us to discover previously unknown relationships and to propose configuration guidelines for operators

Saving Energy in Mobile Devices for On-Demand Multimedia Streaming -- A Cross-Layer Approach

This paper proposes a novel energy-efficient multimedia delivery system called EStreamer. First, we study the relationship between buffer size at the client, burst-shaped TCP-based multimedia traffic, and energy consumption of wireless network interfaces in smartphones. Based on the study, we design and implement EStreamer for constant bit rate and rate-adaptive streaming. EStreamer can improve battery lifetime by 3x, 1.5x and 2x while streaming over Wi-Fi, 3G and 4G respectively.Comment: Accepted in ACM Transactions on Multimedia Computing, Communications and Applications (ACM TOMCCAP), November 201

On the effect of combining cooperative communication with sleep mode

Cooperation is crucial in (next-generation) wireless networks as it can greatly attribute to ensuring connectivity, reliability, performance, ... Relaying looks promising in a wide variety of network types (cellular, ad-hoc on-demand), each using a certain protocol. Energy efficiency constitutes another key aspect of such networks, as battery power is often limited, and is typically achieved by sleep mode operation. As the range of applications is very broad, rather than modelling one of the protocols in detail, we construct a high-level model capturing the two essential characteristics of cooperation and energy efficiency: relaying and sleep mode, and study their interaction. The used analytical approach allows for accurate performance evaluation and enables us to unveil less trivial trade-offs and to formulate rules-of-thumb applicable across all potential scenarios

Performance Evaluation of Power Efficient Mechanisms on Multimedia over LTE-A Networks

Power optimization is a critical challenge in multimedia services over cellular communication systems. Long Term Evolution-Advanced (LTE-A) has been developed for higher bandwidth access for accommodating today’s heavy data applications to provide better performance. Idle mode permits cellularstations to manipulate power and sources with the aid of limiting its activity for discrete periods and this eliminates the lively requirement for handover and other ordinary operations. Also, provides a periodical method for the cell station for pending downlink traffic directed to the cellularstation and as a result gets rid network handover traffic from basically inactive cellular stations. Discontinuous Reception (DRX) has been carried out to decrease the power intake of the consumer device, and transmission of big quantity of data. At data transfer, mobile device and the network phases negotiation occur. During other times, the device turns its receiver off and enters a low power state. Thereby similarly assisting numerous services and big quantities of information transmissions. This study prepossession of a massive quantity of data. Also proposes the two-power optimization modes idle mode and DRX mode parameters to achieve maximum possible power saving with the higher quality of multimedia services. Furthermore, the effectiveness of using DRX short cycles and DRX long cycles on multimedia services and the overall performance. Using OPNET Simulator 17.5, it concluded that DRX mechanism is preferred to operate compared with the Idle mechanism, also resulted that the DRX long cycles are a very good choice for all multimedia services and the overall network performance

Green Cellular Networks: A Survey, Some Research Issues and Challenges

Energy efficiency in cellular networks is a growing concern for cellular operators to not only maintain profitability, but also to reduce the overall environment effects. This emerging trend of achieving energy efficiency in cellular networks is motivating the standardization authorities and network operators to continuously explore future technologies in order to bring improvements in the entire network infrastructure. In this article, we present a brief survey of methods to improve the power efficiency of cellular networks, explore some research issues and challenges and suggest some techniques to enable an energy efficient or "green" cellular network. Since base stations consume a maximum portion of the total energy used in a cellular system, we will first provide a comprehensive survey on techniques to obtain energy savings in base stations. Next, we discuss how heterogeneous network deployment based on micro, pico and femto-cells can be used to achieve this goal. Since cognitive radio and cooperative relaying are undisputed future technologies in this regard, we propose a research vision to make these technologies more energy efficient. Lastly, we explore some broader perspectives in realizing a "green" cellular network technologyComment: 16 pages, 5 figures, 2 table

Energy Efficiency in Communications and Networks

The topic of "Energy Efficiency in Communications and Networks" attracts growing attention due to economical and environmental reasons. The amount of power consumed by information and communication technologies (ICT) is rapidly increasing, as well as the energy bill of service providers. According to a number of studies, ICT alone is responsible for a percentage which varies from 2% to 10% of the world power consumption. Thus, driving rising cost and sustainability concerns about the energy footprint of the IT infrastructure. Energy-efficiency is an aspect that until recently was only considered for battery driven devices. Today we see energy-efficiency becoming a pervasive issue that will need to be considered in all technology areas from device technology to systems management. This book is seeking to provide a compilation of novel research contributions on hardware design, architectures, protocols and algorithms that will improve the energy efficiency of communication devices and networks and lead to a more energy proportional technology infrastructure