FPGA dynamic and partial reconfiguration : a survey of architectures, methods, and applications

Dynamic and partial reconfiguration are key differentiating capabilities of field programmable gate arrays (FPGAs). While they have been studied extensively in academic literature, they find limited use in deployed systems. We review FPGA reconfiguration, looking at architectures built for the purpose, and the properties of modern commercial architectures. We then investigate design flows, and identify the key challenges in making reconfigurable FPGA systems easier to design. Finally, we look at applications where reconfiguration has found use, as well as proposing new areas where this capability places FPGAs in a unique position for adoption

A Modular Approach to Adaptive Reactive Streaming Systems

The latest generations of FPGA devices offer large resource counts that provide the headroom to implement large-scale and complex systems. However, there are increasing challenges for the designer, not just because of pure size and complexity, but also in harnessing effectively the flexibility and programmability of the FPGA. A central issue is the need to integrate modules from diverse sources to promote modular design and reuse. Further, the capability to perform dynamic partial reconfiguration (DPR) of FPGA devices means that implemented systems can be made reconfigurable, allowing components to be changed during operation. However, use of DPR typically requires low-level planning of the system implementation, adding to the design challenge. This dissertation presents ReShape: a high-level approach for designing systems by interconnecting modules, which gives a ‘plug and play’ look and feel to the designer, is supported by tools that carry out implementation and verification functions, and is carried through to support system reconfiguration during operation. The emphasis is on the inter-module connections and abstracting the communication patterns that are typical between modules – for example, the streaming of data that is common in many FPGA-based systems, or the reading and writing of data to and from memory modules. ShapeUp is also presented as the static precursor to ReShape. In both, the details of wiring and signaling are hidden from view, via metadata associated with individual modules. ReShape allows system reconfiguration at the module level, by supporting type checking of replacement modules and by managing the overall system implementation, via metadata associated with its FPGA floorplan. The methodology and tools have been implemented in a prototype for a broad domain-specific setting – networking systems – and have been validated on real telecommunications design projects

Manticore: Hardware-Accelerated RTL Simulation with Static Bulk-Synchronous Parallelism

The demise of Moore's Law and Dennard Scaling has revived interest in specialized computer architectures and accelerators. Verification and testing of this hardware heavily uses cycle-accurate simulation of register-transfer-level (RTL) designs. The best software RTL simulators can simulate designs at 1--1000~kHz, i.e., more than three orders of magnitude slower than hardware. Faster simulation can increase productivity by speeding design iterations and permitting more exhaustive exploration. One possibility is to use parallelism as RTL exposes considerable fine-grain concurrency. However, state-of-the-art RTL simulators generally perform best when single-threaded since modern processors cannot effectively exploit fine-grain parallelism. This work presents Manticore: a parallel computer designed to accelerate RTL simulation. Manticore uses a static bulk-synchronous parallel (BSP) execution model to eliminate runtime synchronization barriers among many simple processors. Manticore relies entirely on its compiler to schedule resources and communication. Because RTL code is practically free of long divergent execution paths, static scheduling is feasible. Communication and synchronization no longer incur runtime overhead, enabling efficient fine-grain parallelism. Moreover, static scheduling dramatically simplifies the physical implementation, significantly increasing the potential parallelism on a chip. Our 225-core FPGA prototype running at 475 MHz outperforms a state-of-the-art RTL simulator on an Intel Xeon processor running at $\approx$ 3.3 GHz by up to 27.9$\times$ (geomean 5.3$\times$) in nine Verilog benchmarks

Timing verification of dynamically reconfigurable logic for Xilinx Virtex FPGA series

This paper reports on a method for extending existing VHDL design and verification software available for the Xilinx Virtex series of FPGAs. It allows the designer to apply standard hardware design and verification tools to the design of dynamically reconfigurable logic (DRL). The technique involves the conversion of a dynamic design into multiple static designs, suitable for input to standard synthesis and APR tools. For timing and functional verification after APR, the sections of the design can then be recombined into a single dynamic system. The technique has been automated by extending an existing DRL design tool named DCSTech, which is part of the Dynamic Circuit Switching (DCS) CAD framework. The principles behind the tools are generic and should be readily extensible to other architectures and CAD toolsets. Implementation of the dynamic system involves the production of partial configuration bitstreams to load sections of circuitry. The process of creating such bitstreams, the final stage of our design flow, is summarized

Optimising and evaluating designs for reconfigurable hardware

Growing demand for computational performance, and the rising cost for chip design and manufacturing make reconfigurable hardware increasingly attractive for digital system implementation. Reconfigurable hardware, such as field-programmable gate arrays (FPGAs), can deliver performance through parallelism while also providing flexibility to enable application builders to reconfigure them. However, reconfigurable systems, particularly those involving run-time reconfiguration, are often developed in an ad-hoc manner. Such an approach usually results in low designer productivity and can lead to inefficient designs. This thesis covers three main achievements that address this situation. The first achievement is a model that captures design parameters of reconfigurable hardware and performance parameters of a given application domain. This model supports optimisations for several design metrics such as performance, area, and power consumption. The second achievement is a technique that enhances the relocatability of bitstreams for reconfigurable devices, taking into account heterogeneous resources. This method increases the flexibility of modules represented by these bitstreams while reducing configuration storage size and design compilation time. The third achievement is a technique to characterise the power consumption of FPGAs in different activity modes. This technique includes the evaluation of standby power and dedicated low-power modes, which are crucial in meeting the requirements for battery-based mobile devices

Adaptation of High Performance and High Capacity Reconfigurable Systems to OpenCL Programming Environments

[EN] In this work, we adapt a reconfigurable computer system based on FPGA technologies to OpenCL programming environments. The reconfigurable system is part of a compute prototype of the MANGO European project that includes 96 FPGAs. To optimize the use and to obtain its maximum performance, it is essential to adapt it to heterogeneous systems programming environments such as OpenCL, which simplifies its programming. In this work, all the necessary activities for correct implementation of the software and hardware layer required for its use in OpenCL will be carried out, as well as an evaluation of the performance obtained and the flexibility offered by the solution provided. This work has been performed during an internship of 5 months. The internship is linked to an agreement between UPV and UniNa (Università degli Studi di Napoli Federico II).[ES] En este trabajo se va a realizar la adaptación de un sistema reconfigurable de cómputo basado en tecnologías de FPGAs hacia entornos de programación en OpenCL. El sistema reconfigurable forma parte de un prototipo de cálculo del proyecto Europeo MANGO que incluye 96 FPGAs. Con el fin de optimizar el uso y de obtener sus máximas prestaciones, se hace imprescindible una adaptación a entornos de programación de sistemas heterogéneos como OpenCL, lo cual simplifica su programación y uso. En este trabajo se realizarán todas las actividades necesarias para una correcta implementación de la capa software y hardware necesaria para su uso en OpenCL así como una evaluación de las prestaciones obtenidas y de la flexibilidad ofrecida por la solución aportada. Este trabajo se ha llevado a término durante una estancia de cinco meses en la Universitat Politécnica de Valéncia. Esta estancia está vinculada a un acuerdo entre la Universitat Politécnica de Valéncia y la Università degli Studi di Napoli Federico IIRusso, D. (2020). Adaptation of High Performance and High Capacity Reconfigurable Systems to OpenCL Programming Environments. http://hdl.handle.net/10251/150393TFG