Phase-locked loop, delay-locked loop, and linear decorrelating detector for asynchronous multirate DS-CDMA system

The performance of phase synchronization and code tracking of a digital phase-locked loop (PLL) and delay-locked loop (DLL), respectively, is investigated in wideband asynchronous multirate DS-CDMA system. Dynamic Partial Correlation (DPC) method is proposed to evaluate the autocorrelation and its power spectrum density (PSD) of the cross-correlated terms in the presence of multirate multiple access interference (MMAI) under additive white gaussian noise (AWGN) and fading channel environments. The steady-state probability density function (PDF) and variance of the phase estimator error and code tracking jitter is evaluated by solving the first-order Fokker-Planck equation. Among many linear multiuser detectors which decouple the multiple access interference from each of the interfering users, one-shot window linear decorrelating detector (LDD) based on a one bit period to reduce the complexity of the LDD has attracted wide attention as an implementation scheme. Therefore, we propose Hybrid Selection Diversity/ Maximal Ratio Combining (Hybrid SD/MRC) one-shot window linear decorrelating detector (LDD) for asynchronous DS-CDMA systems. The selection diversity scheme at the input of the Hybrid SD/MRC LDD is based on choosing the branch with the maximum signal-to-noise ratio (SNR) of all filter outputs. The MR Combining scheme at the output of the Hybrid SD/MRC LDD adopts to maximize the output SNR and thus compensates for the enhanced output noise. The Hybrid SD/MRC one-shot LDD with PLL is introduced to track its phase error and to improve the demodulation performance. The probability density functions of the maximum SNR of the SD combiner, the near-far resistance (NFR) of one-shot LDD by Gaussian approximation, and the maximum SNR of the MR combiner for Hybrid SD/MRC LDD are evaluated, and the bit error probability is obtained from these pdfs. The performance of Hybrid SD/MRC one-shot LDD is assessed in a Rayleigh fading channel

Uso de técnicas de combinação de diversidade e fatores de espalhamento estendidos para melhorar a performance e reduzir a complexidade do receptor OFDM em IEEE 802.15.4g

Orientadores: Renato da Rocha Lopes, Eduardo Rodrigues de LimaDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: EEE 802.15.4g é um adendo da norma IEEE 802.15.4 focada em Smart Utility Network (SUN), e dedicada a requisitos de comunicação no contexto de Low Rate (LR) Wireless Personal Area Network (WPAN). Hoje em dia, devido às suas características, o adendo foca em apliações de Smart Ubiquitous Network, como cidades inteligentes e Internet das Coisas (IoT). Uma das três Camadas Físicas (PHYs) definidas na norma é a Multi-Rate and Multi-Regional Orthogonal Frequency Division Multiplexing (MR-OFDM). Além de outras características, o MR-OFDM emprega o método Frequency Spreading (FS) para reduzir a Peak-to-Average Power Ratio (PAPR) do símbolo OFDM. Sob algumas premissas do canal, este trabalho mostra que o FS também pode introduzir diversidade em frequência à camada física. Este trabalho propõe um método para reverter o espalhamento de frequência que explora diversidade em IEEE 802.15.4g MR-OFDM. O método segue duas abordagens: o uso de técnicas de combinação de diversidade e a proposta de novas configurações de Modulation and Coding Scheme (MCS) usando fatores de espalhamento estendidos. Em um canal com distribuição Rayleigh e assumindo subportadoras não correlacionadas, o método proposto mostra melhorias de até 10.35 dB quando comparado ao MR-OFDM, revertendo o espa-lhamento de frequência de forma direta, usando configurações originais. O método é válido mesmo na presença de erros na estimativa do canal e bandas de coerência largas. O trabalho faz parte de um projeto maior que visa a implementação de um circuito integrado capaz de suportar as três camadas físicas definias em IEEE 802.15.4g, não apenas o MR-OFDM. Devido a isso, o método deve ser totalmente compatível com a norma e focar na complexidade de implementação do receptor MR-OFDMAbstract: IEEE 802.15.4g is an amendment of the IEEE 802.15.4 standard focused on Smart Utility Networks (SUN), and devoted to the communication requirements of Low Rate Wireless Personal Area Network (LR-WPAN). Nowadays, due to its characteristics, the amendment focuses on Smart Ubiquitous Network applications, such as Smart City and Internet of Things (IoT). One of the three Physical Layers (PHYs) defined in the standard is the Multi-Rate and Multi-Regional Orthogonal Frequency Division Multiplexing (MR-OFDM). In addition to other features, the MR-OFDM employs frequency spreading to reduce the Peak-to-Average Power Ratio (PAPR) of the OFDM symbol. Under some channel assumptions, this frequency spreading can also introduce frequency diversity to the PHY. This work proposes a method to perform frequency despreading that exploits diversity in the IEEE 802.15.4g MR-OFDM PHY. The method follows two approaches: the use of diversity combining techniques and the proposal of new Modulation and Coding Scheme (MCS) configurations using extended spreading factors. In a channel with Rayleigh distribution and assuming uncorrelated subcarriers, the proposed method shows improvements up to 10.35 dB when compared to the MR-OFDM performing frequency despreading using original configurations. The method is valid even in the presence of channel estimation errors and large channel coherence bandwidths. The work is part of a larger project which aims at the implementation of an Integrated Circuit capable of handling the three PHYs defined in the IEEE802.15.4g, not only the MR-OFDM. Thus, the method must be fully compliant to the standard and focus on the MR-OFDM receiver implementation complexityMestradoTelecomunicações e TelemáticaMestre em Engenharia Elétric

Performance improvements in wireless CDMA communications utilizing adaptive antenna arrays

This dissertation studies applications of adaptive antenna arrays and space-time adaptive processing (STAP) in wireless code-division multiple-access (CDMA) communications. The work addresses three aspects of the CDMA communications problems: (I) near-far resistance, (2) reverse link, (3) forward link. In each case, adaptive arrays are applied and their performance is investigated. The near-far effect is a well known problem which affects the reverse link of CDMA communication systems. The near-far resistance of STAP is analyzed for two processing methods: maximal ratio combining and optimum combining. It. is shown that while maximal ratio combining is not near-far resistant, optimum combining is near-far resistant when the number of cochannel interferences is less than the system dimensionality. The near-far effect can be mitigated by accurate power control at the mobile station. With practical limitations, the received signal power at a base station from a power-controlled user is a random variable clue to power control error. The statistical model of signal-to-interference ratio at the antenna array output of a base station is presented, and the outage probability of the CDMA reverse link is analyzed while considering Rayleigh fading, voice activity and power control error. New analytical expressions are obtained and demonstrated by computer simulations. For the application of an adaptive antenna. array at the forward link, a receiver architecture is suggested for the mobile station that utilizes a small two-antenna array For interference suppression. Such a receiver works well only when the channel vector of the desired signal is known. The identifying spreading codes (as in IS-95A for example) are used to provide an adaptive channel vector estimate, and control the beam steering weight, hence improve the receiver performance. Numerical results are presented to illustrate the operation of the proposed receiver model and the improvement in performance and capacity

Wireless multiuser communication systems: diversity receiver performance analysis, GSMuD design, and fading channel simulator

Multipath fading phenomenon is central to the design and analysis of wireless communication systems including multiuser systems. If untreated, the fading will corrupt the transmitted signal and often cause performance degradations such as increased communication error and decreased data rate, as compared to wireline channels with little or no multipath fading. On the other hand, this multipath fading phenomenon, if fully utilized, can actually lead to system designs that provide additional gains in system performance as compared to systems that experience non-fading channels.;The central question this thesis tries to answer is how to design and analyze a wireless multiuser system that takes advantage of the benefits the diversity multipath fading channel provides. Two particular techniques are discussed and analyzed in the first part of the thesis: quadrature amplitude modulation (QAM) and diversity receivers, including maximal ratio combining (MRC) and generalized selection combining (GSC). We consider the practical case of imperfect channel estimation (ICE) and develop a new decision variable (DV) of MRC receiver output for M-QAM. By deriving its moment generating function (MGF), we obtain the exact bit error rate (BER) performance under arbitrary correlated Rayleigh and Rician channels, with ICE. GSC provides a tradeoff between receiver complexity and performance. We study the effect of ICE on the GSC output effective SNR under generalized fading channels and obtain the exact BER results for M-QAM systems. The significance of this part lies in that these results provide system designers means to evaluate how different practical channel estimators and their parameters can affect the system\u27s performance and help them distribute system resources that can most effectively improve performance.;In the second part of the thesis, we look at a new diversity technique unique to multiuser systems under multipath fading channels: the multiuser diversity. We devise a generalized selection multiuser diversity (GSMuD) scheme for the practical CDMA downlink systems, where users are selected for transmission based on their respective channel qualities. We include the effect of ICE in the design and analysis of GSMuD. Based on the marginal distribution of the ranked user signal-noise ratios (SNRs), we develop a practical adaptive modulation and coding (AMC) scheme and equal power allocation scheme and statistical optimal 1-D and 2-D power allocation schemes, to fully exploit the available multiuser diversity. We use the convex optimization procedures to obtain the 1-D and 2-D power allocation algorithms, which distribute the total system power in the waterfilling fashion alone the user (1-D) or both user and time (2-D) for the power-limited and energy-limited system respectively. We also propose a normalized SNR based GSMuD scheme where user access fairness issues are explicitly addressed. We address various fairness-related performance metrics such as the user\u27s average access probability (AAP), average access time (AAT), and average wait time (AWT) in the absolute- and normalized-SNR based GSMuD. These metrics are useful for system designers to determine parameters such as optimal packet size and delay constraints.;We observe that Nakakagami-m fading channel model is widely applied to model the real world multipath fading channels of different severity. In the last part of the thesis, we propose a Nakagami-m channel simulator that can generate accurate channel coefficients that follow the Nakagami-m model, with independent quadrature parts, accurate phase distribution and arbitrary auto-correlation property. We demonstrate that the proposed simulator can be extremely useful in simulations involving Nakagami-m fading channel models, evident from the numerous simulation results obtained in earlier parts of the thesis where the fading channel coefficients are generated using this proposed simulator

Advanced methods in automatic modulation classification for emerging technologies

Modulation classification (MC) is of large importance in both military and commercial communication applications. It is a challenging problem, especially in non-cooperative wireless environments, where channel fading and no prior knowledge on the incoming signal are major factors that deteriorate the reception performance. Although the average likelihood ratio test method can provide an optimal solution to the MC problem with unknown parameters, it suffers from high computational complexity and in some cases mathematical intractability. Instead, in this research, an array-based quasi-hybrid likelihood ratio test (qHLRT) algorithm is proposed, which depicts two major advantages. First, it is simple yet accurate enough parameter estimation with reduced complexity. Second the incorporation of antenna arrays offers an effective ability to combat fading. Furthermore, a practical array-based qHLRT classifier scheme is implemented, which applies maximal ratio combining (MRC) to increase the accuracy of both carrier frequency offset (CFO) estimation and likelihood function calculation in channel fading. In fact, double CFO estimations are executed in this classifier. With the first the unknown CFO, phase offsets and amplitudes are estimated as prerequisite for MRC operation. Then, MRC is performed using these estimates, followed by a second CFO estimator. Since the input of the second CFO estimator is the output of the MRC, fading effects on the incoming signals are removed significantly and signal-to-noise ratio (SNR) is augmented. As a result, a more accurate CFO estimate is obtained. Consequently, the overall classification performance is improved, especially in low SNR environment. Recently, many state-of-the-arts communication technologies, such as orthogonal frequency division multiplexing (OFDM) modulations, have been emerging. The need for distinguishing OFDM signal from single carrier has become obvious. Besides, some vital parameters of OFDM signals should be extracted for further processing. In comparison to the research on MC for single carrier single antenna transmission, much less attention has been paid to the MC for emerging modulation methods. A comprehensive classification system is proposed for recognizing the OFDM signal and extracting its parameters. An automatic OFDM modulation classifier is proposed, which is based on the goodness-of-fittest. Since OFDM signal is Gaussian, Cramer-von Mises technique, working on the empirical distribution function, has been applied to test the presence of the normality. Numerical results show that such approach can successfully identify OFDM signals from single carrier modulations over a wide SNR range. Moreover, the proposed scheme can provide the acceptable performance when frequency-selective fading is present. Correlation test is then applied to estimate OFDM cyclic prefix duration. A two-phase searching scheme, which is based on Fast Fourier Transform (FFT) as well as Gaussianity test, is devised to detect the number of subcarriers. In the first phase, a coarse search is carried out iteratively. The exact number of subcarriers is determined by the fine tune in the second phase. Both analytical work and numerical results are presented to verify the efficiency of the proposed scheme

Land Mobile Radio Systems - A Tutorial Exposition

An in-depth tutorial on land mobile radio system