Space station electrical power system availability study

ARINC Research Corporation performed a preliminary reliability, and maintainability (RAM) anlaysis of the NASA space station Electric Power Station (EPS). The analysis was performed using the ARINC Research developed UNIRAM RAM assessment methodology and software program. The analysis was performed in two phases: EPS modeling and EPS RAM assessment. The EPS was modeled in four parts: the insolar power generation system, the eclipse power generation system, the power management and distribution system (both ring and radial power distribution control unit (PDCU) architectures), and the power distribution to the inner keel PDCUs. The EPS RAM assessment was conducted in five steps: the use of UNIRAM to perform baseline EPS model analyses and to determine the orbital replacement unit (ORU) criticalities; the determination of EPS sensitivity to on-orbit spared of ORUs and the provision of an indication of which ORUs may need to be spared on-orbit; the determination of EPS sensitivity to changes in ORU reliability; the determination of the expected annual number of ORU failures; and the integration of the power generator system model results with the distribution system model results to assess the full EPS. Conclusions were drawn and recommendations were made

Autonomous power expert system

The Autonomous Power Expert (APEX) system was designed to monitor and diagnose fault conditions that occur within the Space Station Freedom Electrical Power System (SSF/EPS) Testbed. APEX is designed to interface with SSF/EPS testbed power management controllers to provide enhanced autonomous operation and control capability. The APEX architecture consists of three components: (1) a rule-based expert system, (2) a testbed data acquisition interface, and (3) a power scheduler interface. Fault detection, fault isolation, justification of probable causes, recommended actions, and incipient fault analysis are the main functions of the expert system component. The data acquisition component requests and receives pertinent parametric values from the EPS testbed and asserts the values into a knowledge base. Power load profile information is obtained from a remote scheduler through the power scheduler interface component. The current APEX design and development work is discussed. Operation and use of APEX by way of the user interface screens is also covered

Autonomous power system brassboard

The Autonomous Power System (APS) brassboard is a 20 kHz power distribution system which has been developed at NASA Lewis Research Center, Cleveland, Ohio. The brassboard exists to provide a realistic hardware platform capable of testing artificially intelligent (AI) software. The brassboard's power circuit topology is based upon a Power Distribution Control Unit (PDCU), which is a subset of an advanced development 20 kHz electrical power system (EPS) testbed, originally designed for Space Station Freedom (SSF). The APS program is designed to demonstrate the application of intelligent software as a fault detection, isolation, and recovery methodology for space power systems. This report discusses both the hardware and software elements used to construct the present configuration of the brassboard. The brassboard power components are described. These include the solid-state switches (herein referred to as switchgear), transformers, sources, and loads. Closely linked to this power portion of the brassboard is the first level of embedded control. Hardware used to implement this control and its associated software is discussed. An Ada software program, developed by Lewis Research Center's Space Station Freedom Directorate for their 20 kHz testbed, is used to control the brassboard's switchgear, as well as monitor key brassboard parameters through sensors located within these switches. The Ada code is downloaded from a PC/AT, and is resident within the 8086 microprocessor-based embedded controllers. The PC/AT is also used for smart terminal emulation, capable of controlling the switchgear as well as displaying data from them. Intelligent control is provided through use of a T1 Explorer and the Autonomous Power Expert (APEX) LISP software. Real-time load scheduling is implemented through use of a 'C' program-based scheduling engine. The methods of communication between these computers and the brassboard are explored. In order to evaluate the features of both the brassboard hardware and intelligent controlling software, fault circuits have been developed and integrated as part of the brassboard. A description of these fault circuits and their function is included. The brassboard has become an extremely useful test facility, promoting artificial intelligence (AI) applications for power distribution systems. However, there are elements of the brassboard which could be enhanced, thus improving system performance. Modifications and enhancements to improve the brassboard's operation are discussed

Density functional theoretical study of Cun, Aln (n = 4–31) and copper doped aluminum clusters: Electronic properties and reactivity with atomic oxygen

A DFT study of the electronic properties of copper doped aluminum clusters and their reactivity with atomic oxygen is reported. Firstly we performed calculations for the pure Cun and Aln (n = 4, 9, 10, 13, 25 and 31) clusters and we determined their atomization energy for some frozen conformations at the B3PW91 level. The calculated work functions and M–M (M = Cu, Al) bond energies of the largest clusters are comparable with experimental data. Secondly, we focused our attention on the change of the electronic properties of the systems upon the substitution of an Al atom by a Cu one. This latter stabilizes the system as the atomization energy of the 31- atoms cluster increases of 0.31 eV when the substitution is done on the surface and of 1.18 eV when it is done inside the cluster. We show that the electronic transfer from the Al cluster to the Cu atom located at the surface is large (equal to 0.7 e) while it is negligible when Cu is inserted in the Aln cluster. Moreover, the DOS of the Al31 and Al30Cu systems are compared. Finally, the chemisorption energies of atomic oxygen in threefold sites of the Al31, Cu31 and Al30Cu clusters are calculated and discussed. We show that the chemisorption energy of O is decreasing on the bimetallic systems compared to the pure aluminum cluster

TROUBLE 3: A fault diagnostic expert system for Space Station Freedom's power system

Designing Space Station Freedom has given NASA many opportunities to develop expert systems that automate onboard operations of space based systems. One such development, TROUBLE 3, an expert system that was designed to automate the fault diagnostics of Space Station Freedom's electric power system is described. TROUBLE 3's design is complicated by the fact that Space Station Freedom's power system is evolving and changing. TROUBLE 3 has to be made flexible enough to handle changes with minimal changes to the program. Three types of expert systems were studied: rule-based, set-covering, and model-based. A set-covering approach was selected for TROUBLE 3 because if offered the needed flexibility that was missing from the other approaches. With this flexibility, TROUBLE 3 is not limited to Space Station Freedom applications, it can easily be adapted to handle any diagnostic system

A hybrid approach to space power control

Conventional control systems have traditionally been utilized for space-based power designs. However, the use of expert systems is becoming important for NASA applications. Rocketdyne has been pursuing the development of expert systems to aid and enhance control designs of space-based power systems. The need for integrated expert systems is vital for the development of autonomous power systems

Surface and Interfacial Structure Control of Pd and Pt Based Nanomaterials and Their Catalytic Applications

贵金属纳米材料由于其独特的光学、电学、磁学和催化等性质被广泛应用于能源、环保、食品加工等重要领域。合成纳米新材料，发现新性能容易，但在分子水平上理解其性能本质却很困难。近年来的研究发现，贵金属催化剂的催化活性和选择性与催化剂的表面和界面结构密切相关。因此，制备尺寸、形貌和组成可控的贵金属纳米材料，并深入研究其尺寸、组成、表面结构和界面结构与催化性能之间的构效关系显得尤为重要。本论文的工作主要围绕钯铂纳米材料的表界面调控与催化性能之间的关系展开。全文共分为七章，各章内容概括如下： 第一章，简要介绍了纳米催化剂的尺寸、组成和表界面结构在催化反应中的构效关系，阐明了本论文的选题依据和研究内容。 ...Owing to their unique optical, electrical, magnetic and catalytic properties, noble metal materials with ultrathin nanostructures have been emerging as desirable materials in many fields of chemical, food, energy and environmental industry. Although many efforts have been devoted to the synthesis of new nanomaterials and their new performance, there is still plenty of room in study on mechanism of...学位：理学博士院系专业：化学化工学院_无机化学学号：2052013015381