An approach for real-time motion planning of an inchworm robot in complex steel bridge environments

© Cambridge University Press 2016. Path planning can be difficult and time consuming for inchworm robots especially when operating in complex 3D environments such as steel bridges. Confined areas may prevent a robot from extensively searching the environment by limiting its mobility. An approach for real-time path planning is presented. This approach first uses the concept of line-of-sight (LoS) to find waypoints from the start pose to the end node. It then plans smooth, collision-free motion for a robot to move between waypoints using a 3D-F2 algorithm. Extensive simulations and experiments are conducted in 2D and 3D scenarios to verify the approach

Climbing Robot for Steel Bridge Inspection: Design Challenges

Inspection of bridges often requires high risk operations such as working at heights, in confined spaces, in hazardous environments; or sites inaccessible by humans. There is significant motivation for robotic solutions which can carry out these inspection tasks. When inspection robots are deployed in real world inspection scenarios, it is inevitable that unforeseen challenges will be encountered. Since 2011, the New South Wales Roads & Maritime Services and the Centre of Excellence for Autonomous Systems at the University of Technology, Sydney, have been working together to develop an innovative climbing robot to inspect high risk locations on the Sydney Harbour Bridge. Many engineering challenges have been faced throughout the development of several prototype climbing robots, and through field trials in the archways of the Sydney Harbour Bridge. This paper will highlight some of the key challenges faced in designing a climbing robot for inspection, and then present an inchworm inspired robot which addresses many of these challenges

BogieBot: A Climbing Robot in Cluttered Confined Space of Bogies with Ferrous Metal Surfaces

Proactive inspection is essential for prediction and prevention of rolling stock component failures. The conventional process for inspecting bogies under trains presents significant challenges for inspectors who need to visually check the tight and cluttered environment. We propose a miniature multi-link climbing robot, called BogieBot, that can be deployed inside the undercarriage areas of trains and other large vehicles for inspection and maintenance purposes. BogieBot can carry a visual sensor or manipulator on its main body. The novel compact design utilises six identical couple joints and two mechanically switchable magnetic grippers that together, empower multi-modal climbing and manipulation. The proposed mechanism is kinematically redundant, allowing the robot to perform self-motions in a tight space and manoeuvre around obstacles. The mechanism design and various analyses on the forward and inverse kinematic, work-space, and self-motions of BogieBot are presented. The robot is demonstrated to perform challenging navigation tasks in different scenarios involving simulated complex environments

A Two Dimensional Crystalline Atomic Unit Modular Self-reconfigurable Robot

Self-reconfigurable robots are designed so that they can change their external shape without human intervention. One general way to achieve such functionality is to build a robot composed of multiple, identical unit modules. If the modules are designed so that they can be assembled into rigid structures, and so that individual units within such structures can be relocated within and about the structure, then self-reconfiguration is possible. We propose the Crystalline Atomic unit modular self-reconfigurable robot, where each unit is called an Atom. In two dimensions, an Atom is square. Connectors at the faces of each Atom support structure formation (such structures are called Crystals). Centrally placed prismatic degrees of freedom give Atoms the ability to contract their outer side-length by a constant factor. By contracting and expanding groups of Atoms in a coordinated way, Atoms can relocate within and about Crystals. Thus Atoms are shown to satisfy the two properties necessary to function as modules of a self-reconfigurable robot. A powerful software simulator for Crystalline Atomic robots in two and three dimensions, called xtalsim, is presented. Xtalsim includes a high-level language interface for specifying reconfigurations, an engine which expands implicit reconfiguration plans into explicit Crystal state sequences, and an interactive animator which displays the results in a virtual environment. An automated planning algorithm for generating reconfigurations, called the Melt-Grow planner, is described. The Melt-Grow planner is fast (O(n2) for Crystals of n Atoms) and complete for a fully general subset of Crystals. The Melt-Grow planner is implemented and interfaced to xtalsim, and an automatically planned reconfiguration is simulated. Finally, the mechanics, electronics, and software for an Atom implementation are developed. Two Atoms are constructed and experiments are performed which indicate that, with some hardware improvements, an interesting self-reconfiguration could be demonstrated by a group of Atoms

Soft Robot-Assisted Minimally Invasive Surgery and Interventions: Advances and Outlook

Since the emergence of soft robotics around two decades ago, research interest in the field has escalated at a pace. It is fuelled by the industry's appreciation of the wide range of soft materials available that can be used to create highly dexterous robots with adaptability characteristics far beyond that which can be achieved with rigid component devices. The ability, inherent in soft robots, to compliantly adapt to the environment, has significantly sparked interest from the surgical robotics community. This article provides an in-depth overview of recent progress and outlines the remaining challenges in the development of soft robotics for minimally invasive surgery

Mechatronic Systems

Mechatronics, the synergistic blend of mechanics, electronics, and computer science, has evolved over the past twenty five years, leading to a novel stage of engineering design. By integrating the best design practices with the most advanced technologies, mechatronics aims at realizing high-quality products, guaranteeing at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. With its twenty chapters, which collect contributions from many researchers worldwide, this book provides an excellent survey of recent work in the field of mechatronics with applications in various fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. We would like to thank all the authors who have invested a great deal of time to write such interesting chapters, which we are sure will be valuable to the readers. Chapters 1 to 6 deal with applications of mechatronics for the development of robotic systems. Medical and assistive technologies and human-machine interaction systems are the topic of chapters 7 to 13.Chapters 14 and 15 concern mechatronic systems for autonomous vehicles. Chapters 16-19 deal with mechatronics in manufacturing contexts. Chapter 20 concludes the book, describing a method for the installation of mechatronics education in schools

Design and Analysis of Exaggerated Rectilinear Gait-Based Snake-Inspired Robots

Snake-inspired locomotion is much more maneuverable compared to conventional locomotion concepts and it enables a robot to navigate through rough terrain. A rectilinear gait is quite flexible and has the following benefits: functionality on a wide variety of terrains, enables a highly stable robot platform, and provides pure undulatory motion without passive wheels. These benefits make rectilinear gaits especially suitable for search and rescue applications. However, previous robot designs utilizing rectilinear gaits were slow in speed and required considerable vertical motion. This dissertation will explore the development and implementation of a new exaggerated rectilinear gait that which will enable high speed locomotion and more efficient operation in a snake-inspired robot platform. The exaggerated rectilinear gait will emulate the natural snake's rectilinear gait to gain the benefit a snake's terrain adaptability, but the sequence and range of joint motion will be greatly exaggerated to achieve higher velocities to support robot speeds within the range of human walking speed. The following issues will be investigated in this dissertation. First, this dissertation will address the challenge of developing a snake-inspired robot capable of executing exaggerated rectilinear gaits. To successfully execute the exaggerated rectilinear gait, a snake-inspired robot platform must be able to perform high speed linear expansion/contraction and pivoting motions between segments. In addition to high speed joint motion, the new mechanical architecture much also incorporate a method for providing positive traction during gait execution. Second, a new exaggerated gait dynamics model will be developed using well established kinematics and dynamics analysis techniques. In addition to the exaggerated rectilinear gaits which emphasize high speed, a set of exaggerated rectilinear gaits which emphasize high traction will also be developed for application on difficult terrain types. Finally, an exaggerated rectilinear that emphasizes energy efficiency is defined and analyzed. This dissertation provides the foundations for realizing a high speed limbless locomotion capable of meeting the needs of the search, rescue, and recovery applications