Polukoračno upravljanje pozicijom linearnog prekidačko-reluktantnog motora bez senzora bazirano na stražnjim elektromagnetskim silama

This paper presents a position sensorless closed loop control of a switched reluctance linear motor. The aim of the proposed control is to damp the position of the studied motor. Indeed, the position oscillations can harm some applications requiring high position precision. Moreover, they can induce the linear switched reluctance motor to an erratic working. The proposed control solution is based on back Electromotive Forces which give information about the oscillatory behaviour of the studied motor and avoid the use of a cumbersome and expensive position linear sensor. The determination of the designed control law parameters was based on the singular perturbation theory. The efficiency of the proposed control solution was proven by simulations and experimental tests.Ovaj rad predstavlja upravljanje linearnim prekidačko-reluktantnim motorom u zatvorenoj petlji bez senzora. Cilj predloženog upravljanja je prigušiti oscilacije pozicije navedenog motora. Oscilacije pozicije mogu štetno utjecati na aplikacije koje zahtijevaju visoku preciznost pozicije. Također oscilacije mogu dovesti do nepravilnog rada motora. Predloženo rješenje upravljanja zasniva se na stražnjim elektromotornim silama koje daju informaciju o oscilatornom vladanju navedenog motora čime se izbjegava potreba za skupim i nezgrapnim linearnim senzorom pozicije. Određivanje parametara upravljanja je bazirano na singularnoj teoriji perturbacije. Efikasnost predloženog sustava upravljanja dokazana je pomoću simulacijskih i eksperimentalnih testiranja

Development and Implementation of Some Controllers for Performance Enhancement and Effective Utilization of Induction Motor Drive

The technological development in the field of power electronics and DSP technology is rapidly changing the aspect of drive technology. Implementations of advanced control strategies like field oriented control, linearization control, etc. to AC drives with variable voltage, and variable frequency source is possible because of the advent of high modulating frequency PWM inverters. The modeling complexity in the drive system and the subsequent requirement for modern control algorithms are being easily taken care by high computational power, low-cost DSP controllers. The present work is directed to study, design, development, and implementation of various controllers and their comparative evaluations to identify the proper controller for high-performance induction motor (IM) drives. The dynamic modeling for decoupling control of IM is developed by making the flux and torque decoupled. The simulation is carried out in the stationary reference frame with linearized control based on state-space linearization technique. Further, comprehensive and systematic design procedures are derived to tune the PI controllers for both electrical and mechanical subsystems. However, the PI-controller performance is not satisfactory under various disturbances and system uncertainties. Also, precise mathematical model, gain values, and continuous tuning are required for the controller design to obtain high performance. Thus, to overcome these drawbacks, an adapted control strategy based on Adaptive Neuro-Fuzzy Inference System (ANFIS) based controller is developed and implemented in real-time to validate different control strategies. The superiority of the proposed controller is analyzed and is contrasted with the conventional PI controller-based linearized IM drive. The simplified neuro-fuzzy control (NFC) integrates the concept of fuzzy logic and neural network structure like conventional NFC, but it has the advantages of simplicity and improved computational efficiency over conventional NFC as the single input introduced here is an error instead of two inputs error and change in error as in conventional NFC. This structure makes the proposed NFC robust and simple as compared to conventional NFC and thus, can be easily applied to real-time industrial applications. The proposed system incorporated with different control methods is also validated with extensive experimental results using DSP2812. The effectiveness of the proposed method using feedback linearization of IM drive is investigated in simulation as well as in experiment with different working modes. It is evident from the comparative results that the system performance is not deteriorated using proposed simplified NFC as compared to the conventional NFC, rather it shows superior performance over PI-controller-based drive. A hybrid fuel cell (FC) supply system to deliver the power demanded by the feedback linearization (FBL) based IM drive is designed and implemented. The modified simple hybrid neuro-fuzzy sliding-mode control (NFSMC) incorporated with the intuitive FBL substantially reduces torque chattering and improves speed response, giving optimal drive performance under system uncertainties and disturbances. This novel technique also has the benefit of reduced computational burden over conventional NFSMC and thus, suitable for real-time industrial applications. The parameters of the modified NFC is tuned by an adaptive mechanism based on sliding-mode control (SMC). A FC stack with a dc/dc boost converter is considered here as a separate external source during interruption of main supply for maintaining the supply to the motor drive control through the inverter, thereby reducing the burden and average rating of the inverter. A rechargeable battery used as an energy storage supplements the FC during different operating conditions of the drive system. The effectiveness of the proposed method using FC-based linearized IM drive is investigated in simulation, and the efficacy of the proposed controller is validated in real-time. It is evident from the results that the system provides optimal dynamic performance in terms of ripples, overshoot, and settling time responses and is robust in terms of parameters variation and external load

Integration of Active Systems for a Global Chassis Control Design

Vehicle chassis control active systems (braking, suspension, steering and driveline), from the first ABS/ESC control unit to the current advanced driver assistance systems (ADAS), are progressively revolutionizing the way of thinking and designing the vehicle, improving its interaction with the surrounding world (V2V and V2X) and have led to excellent results in terms of safety and performances (dynamic behavior and drivability). They are usually referred as intelligent vehicles due to a software/hardware architecture able to assist the driver for achieving specific safety margin and/or optimal vehicle dynamic behavior. Moreover, industrial and academic communities agree that these technologies will progress till the diffusion of the so called autonomous cars which are able to drive robustly in a wide range of traffic scenarios. Different autonomous vehicles are already available in Europe, Japan and United States and several solutions have been proposed for smart cities and/or small public area like university campus. In this context, the present research activity aims at improving safety, comfort and performances through the integration of global active chassis control: the purposes are to study, design and implement control strategies to support the driver for achieving one or more final target among safety, comfort and performance. Specifically, the vehicle subsystems that are involved in the present research for active systems development are the steering system, the propulsion system, the transmission and the braking system. The thesis is divided into three sections related to different applications of active systems that, starting from a robust theoretical design procedure, are strongly supported by objective experimental results obtained fromHardware In the Loop (HIL) test rigs and/or proving ground testing sessions. The first chapter is dedicated to one of the most discussed topic about autonomous driving due to its impact from the social point of view and in terms of human error mitigation when the driver is not prompt enough. In particular, it is here analyzed the automated steering control which is already implemented for automatic parking and that could represent also a key element for conventional passenger car in emergency situation where a braking intervention is not enough for avoiding an imminent collision. The activity is focused on different steering controllers design and their implementation for an autonomous vehicle; an obstacle collision avoidance adaptation is introduced for future implementations. Three different controllers, Proportional Derivative (PD), PD+Feedforward (FF) e PD+Integral Sliding Mode (ISM), are designed for tracking a reference trajectory that can be modified in real-time for obstacle avoidance purposes. Furthermore, PD+FF and PD+ISM logic are able to improve the tracking performances of automated steering during cornering maneuvers, relevant fromthe collision avoidance point of view. Path tracking control and its obstacle avoidance enhancement is also shown during experimental tests executed in a proving ground through its implementation for an autonomous vehicle demonstrator. Even if the activity is presented for an autonomous vehicle, the active control can be developed also for a conventional vehicle equipped with an Electronic Power Steering (EPS) or Steer-by-wire architectures. The second chapter describes a Torque Vectoring (TV) control strategy, applied to a Fully Electric Vehicle (FEV) with four independent electric motor (one for each wheel), that aims to optimize the lateral vehicle behavior by a proper electric motor torque regulation. A yaw rate controller is presented and designed in order to achieve a desired steady-state lateral behaviour of the car (handling task). Furthermore, a sideslip angle controller is also integrated to preserve vehicle stability during emergency situations (safety task). LQR, LQR+FF and ISM strategies are formulated and explained for yaw rate and concurrent yaw rate/sideslip angle control techniques also comparing their advantages and weakness points. The TV strategy is implemented and calibrated on a FEV demonstrator by executing experimental maneuvers (step steer, skid pad, lane change and sequence of step steers) thus proving the efficacy of the proposed controller and the safety contribution guaranteed by the sideslip control. The TV could be also applied for internal combustion engine driven vehicles by installing specific torque vectoring differentials, able to distribute the torque generated by the engine to each wheel independently. The TV strategy evaluated in the second chapter can be influenced by the presence of a transmission between themotor (or the engine) and wheels (where the torque control is supposed to be designed): in addition to the mechanical delay introduced by transmission components, the presence of gears backlashes can provoke undesired noises and vibrations in presence of torque sign inversion. The last chapter is thus related to a new method for noises and vibration attenuation for a Dual Clutch Transmission (DCT). This is achieved in a new way by integrating the powertrain control with the braking system control, which are historically and conventionally analyzed and designed separately. It is showed that a torsional preload effect can be obtained on transmission components by increasing the wheel torque and concurrently applying a braking wheel torque. For this reason, a pressure following controller is presented and validated through a Hardware In the Loop (HIL) test rig in order to track a reference value of braking torque thus ensuring the desired preload effect and noises reduction. Experimental results demonstrates the efficacy of the controller, also opening new scenario for global chassis control design. Finally, some general conclusions are drawn and possible future activities and recommendations are proposed for further investigations or improvements with respect to the results shown in the present work

Discrete-time sliding mode control based on disturbance observer applied to current control of permanent magnet synchronous motor

This paper proposes a robust current control technique based on a discrete-time sliding mode controller and a disturbance observer for high-performance permanent magnet synchronous motor (PMSM) drives. This scheme is applied in the PMSM current control loops to enable the decoupling between the dq current axes, rejection of disturbances caused by mechanical load changes and robustness under parametric uncertainties. In order to ensure the discrete-time sliding mode properties, which make the system cross the sliding surface at each sampling period, the PMSM model is extended, including the digital implementation delay resulting from the discrete-time algorithm execution. The development of this method allows direct implementation in microcontrollers and digital signal processors. Stability and convergence analysis are developed in the discrete-time domain. Simulation and experimental results demonstrate the effectiveness and good performance of the proposed current control approach

Motor Drive Stabilization in its Chaotic Region

The paper is concerned with the stability analysisand the control of chaos in a permanent magnet dc drivesystem. The stability analysis is based on the eigenvalues ofthe Jacobian matrix of the Poincare Map Function (PMF).Using the auxiliary state vector, the Jacobian matrix can bedetermined without the derivation of the PMF. Acompensating ramp signal is used to avoid bifurcation. Theslope of the ramp signal is also determined by the auxiliarystate vector. The results are verified by computersimulations in the time domain

Zigbee based wireless adjustable speed drive system

Indiana University-Purdue University Indianapolis (IUPUI)This thesis proposes a remotely controlled motor drive system which is able to supply a regulated voltage for both DC and AC motors. The proposed system integrates two different technologies, each of which belongs to the field of wireless communications and semiconductor power electronics. The introduction highlights the literature review and technical contributions in these two electrical engineering fields. The pulse width modulated control algorithm for speed control is discussed in detail. Incorporating the zigbee wireless technology into the motor drive system, for the speed control of an AC and a DC motor, by implementing digital pulse width modulation technique is the aim of this thesis. The main characteristics of the proposed system are: 1) its universal feature since it can feed either DC or AC motor without changing the hardware, 2) remotely controlled, which allows the end-user to control the motor speed safely from a remote distance, 3) flexibility in installation of the motor drives in areas that are not easily accessible by end-users, and 4) uninterrupted speed control for distance of up to few 100 feet

Analysis, design and implementation of high performance control schemes for three phase PWM AC-DC voltage source converter

Ph.DDOCTOR OF PHILOSOPH