Group-In: Group Inference from Wireless Traces of Mobile Devices

This paper proposes Group-In, a wireless scanning system to detect static or mobile people groups in indoor or outdoor environments. Group-In collects only wireless traces from the Bluetooth-enabled mobile devices for group inference. The key problem addressed in this work is to detect not only static groups but also moving groups with a multi-phased approach based only noisy wireless Received Signal Strength Indicator (RSSIs) observed by multiple wireless scanners without localization support. We propose new centralized and decentralized schemes to process the sparse and noisy wireless data, and leverage graph-based clustering techniques for group detection from short-term and long-term aspects. Group-In provides two outcomes: 1) group detection in short time intervals such as two minutes and 2) long-term linkages such as a month. To verify the performance, we conduct two experimental studies. One consists of 27 controlled scenarios in the lab environments. The other is a real-world scenario where we place Bluetooth scanners in an office environment, and employees carry beacons for more than one month. Both the controlled and real-world experiments result in high accuracy group detection in short time intervals and sampling liberties in terms of the Jaccard index and pairwise similarity coefficient.Comment: This work has been funded by the EU Horizon 2020 Programme under Grant Agreements No. 731993 AUTOPILOT and No.871249 LOCUS projects. The content of this paper does not reflect the official opinion of the EU. Responsibility for the information and views expressed therein lies entirely with the authors. Proc. of ACM/IEEE IPSN'20, 202

AN INDOOR BLUETOOTH-CENTRIC PROXIMITY BASED POSITIONING SYSTEM

In recent years, positioning and navigation become an important topic in research. The most popular positioning system is an outdoor positioning called Global Positioning System (GPS). However, due to the influence of weak signal strength, weather conditions, diverse geographical and living environments, GPS sometimes cannot support indoor positioning and, if it can, the 5-10 meters error range does not meet the indoor positioning requirement. In order to provide a better solution with higher accuracy for indoor localization, we can benefit from the proliferation of indoor communication devices. Different technologies such as WiFi, Radio Frequency Identification (RFID) and Ultra-wideband (UWB) have been commonly used in indoor positioning systems. However, WiFi has a high energy consumption for indoor localization, as it consumes 3 to 10 watts per hour in the case of using 3 routers to do the job. In addition, due to its dependency on reference tags, the overall cost of the RFID-based approaches may usually cost more than $300 which is economically prohibitive. In terms of UWB, its low area coverage brings great challenges to popularizing its acceptance as a device for indoor positioning. The Bluetooth Low Energy (BLE) based iBeacon solution primarily focuses on the proximity based detection, and its low power consumption and low price bring great potential for its popularity. In this report, assuming that the resident owns a smartphone which is powered on, we present an iBeacon based indoor positioning system and provide some strategies and algorithms to overcome the indoor noise of possibly weak indoor Bluetooth signals. In our system, the Received Signal Strength Index (RSSI) is pre-processed to eliminate noise. Then, the distance between a mobile device and a BLE signal source can be calculated by combination use of pre-processed RSSI, Kalman Filter, and machine learning. In the end, the current mobile device position can be determined by using a triangulation algorithm. Our experimental results, acquired through running experiments in a real-world scenario, show that the localization error can be as low as 0.985m in the 2D environment. We also compared our results against other works with the same research objectives

Feasibility of LoRa for Smart Home Indoor Localization

With the advancement of low-power and low-cost wireless technologies in the past few years, the Internet of Things (IoT) has been growing rapidly in numerous areas of Industry 4.0 and smart homes. With the development of many applications for the IoT, indoor localization, i.e., the capability to determine the physical location of people or devices, has become an important component of smart homes. Various wireless technologies have been used for indoor localization includingWiFi, ultra-wideband (UWB), Bluetooth low energy (BLE), radio-frequency identification (RFID), and LoRa. The ability of low-cost long range (LoRa) radios for low-power and long-range communication has made this radio technology a suitable candidate for many indoor and outdoor IoT applications. Additionally, research studies have shown the feasibility of localization with LoRa radios. However, indoor localization with LoRa is not adequately explored at the home level, where the localization area is relatively smaller than offices and corporate buildings. In this study, we first explore the feasibility of ranging with LoRa. Then, we conduct experiments to demonstrate the capability of LoRa for accurate and precise indoor localization in a typical apartment setting. Our experimental results show that LoRa-based indoor localization has an accuracy better than 1.6 m in line-of-sight scenario and 3.2 m in extreme non-line-of-sight scenario with a precision better than 25 cm in all cases, without using any data filtering on the location estimates

Robotic Wireless Sensor Networks

In this chapter, we present a literature survey of an emerging, cutting-edge, and multi-disciplinary field of research at the intersection of Robotics and Wireless Sensor Networks (WSN) which we refer to as Robotic Wireless Sensor Networks (RWSN). We define a RWSN as an autonomous networked multi-robot system that aims to achieve certain sensing goals while meeting and maintaining certain communication performance requirements, through cooperative control, learning and adaptation. While both of the component areas, i.e., Robotics and WSN, are very well-known and well-explored, there exist a whole set of new opportunities and research directions at the intersection of these two fields which are relatively or even completely unexplored. One such example would be the use of a set of robotic routers to set up a temporary communication path between a sender and a receiver that uses the controlled mobility to the advantage of packet routing. We find that there exist only a limited number of articles to be directly categorized as RWSN related works whereas there exist a range of articles in the robotics and the WSN literature that are also relevant to this new field of research. To connect the dots, we first identify the core problems and research trends related to RWSN such as connectivity, localization, routing, and robust flow of information. Next, we classify the existing research on RWSN as well as the relevant state-of-the-arts from robotics and WSN community according to the problems and trends identified in the first step. Lastly, we analyze what is missing in the existing literature, and identify topics that require more research attention in the future

Performance Evaluation of a UWB Positioning System Applied to Static and Mobile Use Cases in Industrial Scenarios

Indoor positioning systems are essential in the industrial domain for optimized production and safe operation of mobile elements, such as mobile robots, especially in the presence of static machinery and human operators. In this paper, we assess the performance of a commercial UWB radio-based positioning system deployed in a realistic industrial scenario, considering both static and mobile use cases. Our goal is to characterize the accuracy of this system in the context of industrial use cases and applications. For the static case, an extensive analysis was presented based on measurements performed at 72 measurement positions at 3 different heights (above, at similar a level to, and below the average clutter level) in different industrial clutter conditions (open and cluttered spaces). The extensive analysis in the mobile case considered several runs of a route covered by an autonomous mobile robot equipped with multiple tags in different positions. The results indicate that a similar degree of accuracy with a median 2D positioning error smaller than 20 cm is possible in both static and mobile conditions with an optimized anchor deployment. The paper provides a complete statistical characterization of the system’s accuracy and addresses the multiple deployment trade-offs and system dynamics observed for the different configurations

Software-Defined Lighting.

For much of the past century, indoor lighting has been based on incandescent or gas-discharge technology. But, with LED lighting experiencing a 20x/decade increase in flux density, 10x/decade decrease in cost, and linear improvements in luminous efficiency, solid-state lighting is finally cost-competitive with the status quo. As a result, LED lighting is projected to reach over 70% market penetration by 2030. This dissertation claims that solid-state lighting’s real potential has been barely explored, that now is the time to explore it, and that new lighting platforms and applications can drive lighting far beyond its roots as an illumination technology. Scaling laws make solid-state lighting competitive with conventional lighting, but two key features make solid-state lighting an enabler for many new applications: the high switching speeds possible using LEDs and the color palettes realizable with Red-Green-Blue-White (RGBW) multi-chip assemblies. For this dissertation, we have explored the post-illumination potential of LED lighting in applications as diverse as visible light communications, indoor positioning, smart dust time synchronization, and embedded device configuration, with an eventual eye toward supporting all of them using a shared lighting infrastructure under a unified system architecture that provides software-control over lighting. To explore the space of software-defined lighting (SDL), we design a compact, flexible, and networked SDL platform to allow researchers to rapidly test new ideas. Using this platform, we demonstrate the viability of several applications, including multi-luminaire synchronized communication to a photodiode receiver, communication to mobile phone cameras, and indoor positioning using unmodified mobile phones. We show that all these applications and many other potential applications can be simultaneously supported by a single lighting infrastructure under software control.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/111482/1/samkuo_1.pd