MICROPHONE ARRAY OPTIMIZATION IN IMMERSIVE ENVIRONMENTS

The complex relationship between array gain patterns and microphone distributions limits the application of traditional optimization algorithms on irregular arrays, which show enhanced beamforming performance for human speech capture in immersive environments. This work analyzes the relationship between irregular microphone geometries and spatial filtering performance with statistical methods. Novel geometry descriptors are developed to capture the properties of irregular microphone distributions showing their impact on array performance. General guidelines and optimization methods for regular and irregular array design are proposed in immersive (near-field) environments to obtain superior beamforming ability for speech applications. Optimization times are greatly reduced through the objective function rules using performance-based geometric descriptions of microphone distributions that circumvent direct array gain computations over the space of interest. In addition, probabilistic descriptions of acoustic scenes are introduced to incorporate various levels of prior knowledge for the source distribution. To verify the effectiveness of the proposed optimization methods, simulated gain patterns and real SNR results of the optimized arrays are compared to corresponding traditional regular arrays and arrays obtained from direct exhaustive searching methods. Results show large SNR enhancements for the optimized arrays over arbitrary randomly generated arrays and regular arrays, especially at low microphone densities. The rapid convergence and acceptable processing times observed during the experiments establish the feasibility of proposed optimization methods for array geometry design in immersive environments where rapid deployment is required with limited knowledge of the acoustic scene, such as in mobile platforms and audio surveillance applications

Advances in Evolutionary Algorithms

With the recent trends towards massive data sets and significant computational power, combined with evolutionary algorithmic advances evolutionary computation is becoming much more relevant to practice. Aim of the book is to present recent improvements, innovative ideas and concepts in a part of a huge EA field

Power Optimization in Satellite Communication Using Multi-Intelligent Reflecting Surfaces

This study introduces two innovative methodologies aimed at augmenting energy efficiency in satellite-to-ground communication systems through the integration of multiple Reflective Intelligent Surfaces (RISs). The primary objective of these methodologies is to optimize overall energy efficiency under two distinct scenarios. In the first scenario, denoted as Ideal Environment (IE), we enhance energy efficiency by decomposing the problem into two sub-optimal tasks. The initial task concentrates on maximizing power reception by precisely adjusting the phase shift of each RIS element, followed by the implementation of Selective Diversity to identify the RIS element delivering maximal power. The second task entails minimizing power consumption, formulated as a binary linear programming problem, and addressed using the Binary Particle Swarm Optimization (BPSO) technique. The IE scenario presupposes an environment where signals propagate without any path loss, serving as a foundational benchmark for theoretical evaluations that elucidate the systems optimal capabilities. Conversely, the second scenario, termed Non-Ideal Environment (NIE), is designed for situations where signal transmission is subject to path loss. Within this framework, the Adam algorithm is utilized to optimize energy efficiency. This non ideal setting provides a pragmatic assessment of the systems capabilities under conventional operational conditions. Both scenarios emphasize the potential energy savings achievable by the satellite RIS system. Empirical simulations further corroborate the robustness and effectiveness of our approach, highlighting its potential to enhance energy efficiency in satellite-to-ground communication systems

Reconfigurable Antenna Systems: Platform implementation and low-power matters

Antennas are a necessary and often critical component of all wireless systems, of which they share the ever-increasing complexity and the challenges of present and emerging trends. 5G, massive low-orbit satellite architectures (e.g. OneWeb), industry 4.0, Internet of Things (IoT), satcom on-the-move, Advanced Driver Assistance Systems (ADAS) and Autonomous Vehicles, all call for highly flexible systems, and antenna reconfigurability is an enabling part of these advances. The terminal segment is particularly crucial in this sense, encompassing both very compact antennas or low-profile antennas, all with various adaptability/reconfigurability requirements. This thesis work has dealt with hardware implementation issues of Radio Frequency (RF) antenna reconfigurability, and in particular with low-power General Purpose Platforms (GPP); the work has encompassed Software Defined Radio (SDR) implementation, as well as embedded low-power platforms (in particular on STM32 Nucleo family of micro-controller). The hardware-software platform work has been complemented with design and fabrication of reconfigurable antennas in standard technology, and the resulting systems tested. The selected antenna technology was antenna array with continuously steerable beam, controlled by voltage-driven phase shifting circuits. Applications included notably Wireless Sensor Network (WSN) deployed in the Italian scientific mission in Antarctica, in a traffic-monitoring case study (EU H2020 project), and into an innovative Global Navigation Satellite Systems (GNSS) antenna concept (patent application submitted). The SDR implementation focused on a low-cost and low-power Software-defined radio open-source platform with IEEE 802.11 a/g/p wireless communication capability. In a second embodiment, the flexibility of the SDR paradigm has been traded off to avoid the power consumption associated to the relevant operating system. Application field of reconfigurable antenna is, however, not limited to a better management of the energy consumption. The analysis has also been extended to satellites positioning application. A novel beamforming method has presented demonstrating improvements in the quality of signals received from satellites. Regarding those who deal with positioning algorithms, this advancement help improving precision on the estimated position

Particle Swarm Optimization

Particle swarm optimization (PSO) is a population based stochastic optimization technique influenced by the social behavior of bird flocking or fish schooling.PSO shares many similarities with evolutionary computation techniques such as Genetic Algorithms (GA). The system is initialized with a population of random solutions and searches for optima by updating generations. However, unlike GA, PSO has no evolution operators such as crossover and mutation. In PSO, the potential solutions, called particles, fly through the problem space by following the current optimum particles. This book represents the contributions of the top researchers in this field and will serve as a valuable tool for professionals in this interdisciplinary field

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Applications of compressive sensing to direction of arrival estimation

Die Schätzung der Einfallsrichtungen (Directions of Arrival/DOA) mehrerer ebener Wellenfronten mit Hilfe eines Antennen-Arrays ist eine der prominentesten Fragestellungen im Gebiet der Array-Signalverarbeitung. Das nach wie vor starke Forschungsinteresse in dieser Richtung konzentriert sich vor allem auf die Reduktion des Hardware-Aufwands, im Sinne der Komplexität und des Energieverbrauchs der Empfänger, bei einem vorgegebenen Grad an Genauigkeit und Robustheit gegen Mehrwegeausbreitung. Diese Dissertation beschäftigt sich mit der Anwendung von Compressive Sensing (CS) auf das Gebiet der DOA-Schätzung mit dem Ziel, hiermit die Komplexität der Empfängerhardware zu reduzieren und gleichzeitig eine hohe Richtungsauflösung und Robustheit zu erreichen. CS wurde bereits auf das DOA-Problem angewandt unter der Ausnutzung der Tatsache, dass eine Superposition ebener Wellenfronten mit einer winkelabhängigen Leistungsdichte korrespondiert, die über den Winkel betrachtet sparse ist. Basierend auf der Idee wurden CS-basierte Algorithmen zur DOA-Schätzung vorgeschlagen, die sich durch eine geringe Rechenkomplexität, Robustheit gegenüber Quellenkorrelation und Flexibilität bezüglich der Wahl der Array-Geometrie auszeichnen. Die Anwendung von CS führt darüber hinaus zu einer erheblichen Reduktion der Hardware-Komplexität, da weniger Empfangskanäle benötigt werden und eine geringere Datenmenge zu verarbeiten und zu speichern ist, ohne dabei wesentliche Informationen zu verlieren. Im ersten Teil der Arbeit wird das Problem des Modellfehlers bei der CS-basierten DOA-Schätzung mit gitterbehafteten Verfahren untersucht. Ein häufig verwendeter Ansatz um das CS-Framework auf das DOA-Problem anzuwenden ist es, den kontinuierlichen Winkel-Parameter zu diskreditieren und damit ein Dictionary endlicher Größe zu bilden. Da die tatsächlichen Winkel fast sicher nicht auf diesem Gitter liegen werden, entsteht dabei ein unvermeidlicher Modellfehler, der sich auf die Schätzalgorithmen auswirkt. In der Arbeit wird ein analytischer Ansatz gewählt, um den Effekt der Gitterfehler auf die rekonstruierten Spektra zu untersuchen. Es wird gezeigt, dass sich die Messung einer Quelle aus beliebiger Richtung sehr gut durch die erwarteten Antworten ihrer beiden Nachbarn auf dem Gitter annähern lässt. Darauf basierend wird ein einfaches und effizientes Verfahren vorgeschlagen, den Gitterversatz zu schätzen. Dieser Ansatz ist anwendbar auf einzelne Quellen oder mehrere, räumlich gut separierte Quellen. Für den Fall mehrerer dicht benachbarter Quellen wird ein numerischer Ansatz zur gemeinsamen Schätzung des Gitterversatzes diskutiert. Im zweiten Teil der Arbeit untersuchen wir das Design kompressiver Antennenarrays für die DOA-Schätzung. Die Kompression im Sinne von Linearkombinationen der Antennensignale, erlaubt es, Arrays mit großer Apertur zu entwerfen, die nur wenige Empfangskanäle benötigen und sich konfigurieren lassen. In der Arbeit wird eine einfache Empfangsarchitektur vorgeschlagen und ein allgemeines Systemmodell diskutiert, welches verschiedene Optionen der tatsächlichen Hardware-Realisierung dieser Linearkombinationen zulässt. Im Anschluss wird das Design der Gewichte des analogen Kombinations-Netzwerks untersucht. Numerische Simulationen zeigen die Überlegenheit der vorgeschlagenen kompressiven Antennen-Arrays im Vergleich mit dünn besetzten Arrays der gleichen Komplexität sowie kompressiver Arrays mit zufällig gewählten Gewichten. Schließlich werden zwei weitere Anwendungen der vorgeschlagenen Ansätze diskutiert: CS-basierte Verzögerungsschätzung und kompressives Channel Sounding. Es wird demonstriert, dass die in beiden Gebieten durch die Anwendung der vorgeschlagenen Ansätze erhebliche Verbesserungen erzielt werden können.Direction of Arrival (DOA) estimation of plane waves impinging on an array of sensors is one of the most important tasks in array signal processing, which have attracted tremendous research interest over the past several decades. The estimated DOAs are used in various applications like localization of transmitting sources, massive MIMO and 5G Networks, tracking and surveillance in radar, and many others. The major objective in DOA estimation is to develop approaches that allow to reduce the hardware complexity in terms of receiver costs and power consumption, while providing a desired level of estimation accuracy and robustness in the presence of multiple sources and/or multiple paths. Compressive sensing (CS) is a novel sampling methodology merging signal acquisition and compression. It allows for sampling a signal with a rate below the conventional Nyquist bound. In essence, it has been shown that signals can be acquired at sub-Nyquist sampling rates without loss of information provided they possess a sufficiently sparse representation in some domain and that the measurement strategy is suitably chosen. CS has been recently applied to DOA estimation, leveraging the fact that a superposition of planar wavefronts corresponds to a sparse angular power spectrum. This dissertation investigates the application of compressive sensing to the DOA estimation problem with the goal to reduce the hardware complexity and/or achieve a high resolution and a high level of robustness. Many CS-based DOA estimation algorithms have been proposed in recent years showing tremendous advantages with respect to the complexity of the numerical solution while being insensitive to source correlation and allowing arbitrary array geometries. Moreover, CS has also been suggested to be applied in the spatial domain with the main goal to reduce the complexity of the measurement process by using fewer RF chains and storing less measured data without the loss of any significant information. In the first part of the work we investigate the model mismatch problem for CS based DOA estimation algorithms off the grid. To apply the CS framework a very common approach is to construct a finite dictionary by sampling the angular domain with a predefined sampling grid. Therefore, the target locations are almost surely not located exactly on a subset of these grid points. This leads to a model mismatch which deteriorates the performance of the estimators. We take an analytical approach to investigate the effect of such grid offsets on the recovered spectra showing that each off-grid source can be well approximated by the two neighboring points on the grid. We propose a simple and efficient scheme to estimate the grid offset for a single source or multiple well-separated sources. We also discuss a numerical procedure for the joint estimation of the grid offsets of closer sources. In the second part of the thesis we study the design of compressive antenna arrays for DOA estimation that aim to provide a larger aperture with a reduced hardware complexity and allowing reconfigurability, by a linear combination of the antenna outputs to a lower number of receiver channels. We present a basic receiver architecture of such a compressive array and introduce a generic system model that includes different options for the hardware implementation. We then discuss the design of the analog combining network that performs the receiver channel reduction. Our numerical simulations demonstrate the superiority of the proposed optimized compressive arrays compared to the sparse arrays of the same complexity and to compressive arrays with randomly chosen combining kernels. Finally, we consider two other applications of the sparse recovery and compressive arrays. The first application is CS based time delay estimation and the other one is compressive channel sounding. We show that the proposed approaches for sparse recovery off the grid and compressive arrays show significant improvements in the considered applications compared to conventional methods