A review of networked microgrid protection: Architectures, challenges, solutions, and future trends

The design and selection of advanced protection schemes have become essential for the reliable and secure operation of networked microgrids. Various protection schemes that allow the correct operation of microgrids have been proposed for individual systems in different topologies and connections. Nevertheless, the protection schemes for networked microgrids are still in development, and further research is required to design and operate advanced protection in interconnected systems. The interconnection of these microgrids in different nodes with various interconnection technologies increases the fault occurrence and complicates the protection operation. This paper aims to point out the challenges in developing protection for networked microgrids, potential solutions, and research areas that need to be addressed for their development. First, this article presents a systematic analysis of the different microgrid clusters proposed since 2016, including several architectures of networked microgrids, operation modes, components, and utilization of renewable sources, which have not been widely explored in previous review papers. Second, the paper presents a discussion on the protection systems currently available for microgrid clusters, current challenges, and solutions that have been proposed for these systems. Finally, it discusses the trend of protection schemes in networked microgrids and presents some conclusions related to implementation

Recent Developments and Challenges on AC Microgrids Fault Detection and Protection Systems–A Review

The protection of AC microgrids (MGs) is an issue of paramount importance to ensure their reliable and safe operation. Designing reliable protection mechanism, however, is not a trivial task, as many practical issues need to be considered. The operation mode of MGs, which can be grid-connected or islanded, employed control strategy and practical limitations of the power electronic converters that are utilized to interface renewable energy sources and the grid, are some of the practical constraints that make fault detection, classification, and coordination in MGs different from legacy grid protection. This article aims to present the state-of-the-art of the latest research and developments, including the challenges and issues in the field of AC MG protection. A broad overview of the available fault detection, fault classification, and fault location techniques for AC MG protection and coordination are presented. Moreover, the available methods are classified, and their advantages and disadvantages are discussed

Computational Intelligence Application in Electrical Engineering

The Special Issue "Computational Intelligence Application in Electrical Engineering" deals with the application of computational intelligence techniques in various areas of electrical engineering. The topics of computational intelligence applications in smart power grid optimization, power distribution system protection, and electrical machine design and control optimization are presented in the Special Issue. The co-simulation approach to metaheuristic optimization methods and simulation tools for a power system analysis are also presented. The main computational intelligence techniques, evolutionary optimization, fuzzy inference system, and an artificial neural network are used in the research presented in the Special Issue. The articles published in this issue present the recent trends in computational intelligence applications in the areas of electrical engineering

Metering and adaptive protection for a microgrid with distributed generation

The main objective of this project is to develop an adaptive relaying system that will protect the microgrid both in connected and isolated modes. Therefore the settings for the different relays will be observed for the two modes of operation. This will determine whether they are correctly coordinated in order to operate as an adaptive relaying system. A secondary but also important objective is to identify load management techniques through smart metering that could facilitate power system operation and in turn power system protection. To achieve the goal of this project the proposed relaying system will have to prove appropriate in all the test cases. Based on the results obtained in the simulations, conclusions about the relaying scheme were drawn. Based on cases where the scheme seemed inappropriate or could be improved, recommendations were made. The relaying scheme proposed in this project proved highly successful in detecting abnormalities and protecting the power system when necessary

State-of-the-Art Renewable Energy in Korea

Nowadays, renewable energy plays an important role in our daily lives. This Special Issue addresses the current trend in the use of renewable energy in South Korea. The first aspect is a renewable-based power system, where both main and ancillary supplies are sourced from renewable energies; the second aspect is a distribution network for renewable energy; and the last aspect is a nanogrid network technology. Renewable energy requires many innovations over existing power infrastructure and regulation. These articles show the changing trend in various sectors in Korea

A Microgrid Design Case Study : Synchrophasor Placement and Development of a Protection Laboratory for the Oregon State University - Corvallis Campus

In the past two years, Oregon State University (OSU) Corvallis campus suffered several power outages. The estimated cost of one of those outages was close to a million dollars worth of equipment and impact on research projects. Meanwhile, the campus grid operates with severely aging power assets. The reliability of campus grid operations impact students, faculty and staff and is becoming a general concern. The university, as many other institutions that have critical loads within particularly weak power system areas, is seeking for a sustainable solution in order to cope with these reliability issues. Moreover, due to the fast speed of power system upgrades, integration of renewable energy resources, increasing demands for grid reliability, and aging and retiring infrastructure, there is a growing set of operational and hands-on requirements for the power system students who graduate from the college. Based on the feedback from job interviews and the local industry, utilities are more willing to hire students that familiar with both hardware and software operation of modern power system. Motivated by the challenges described above, we propose two complementary research efforts: a microgrid synchrophasor placement approach, and the design of a power system protection laboratory. OSU campus grid is supported by the main grid with several feeders. There is an advanced cogeneration facility, and two large photovoltaic arrays inside the campus and owned by OSU. Also, many buildings are equipped with smart meters and energy management systems. Therefore, the campus grid has the potential to operate itself as a microgrid. Before applying microgrids technology to the OSU campus grid, the topic of optimization of synchrophasors placement will be an important initial step. In addition, for a microprocessor-based relay, which is widely used in a typical microgrid, the principle and function are the main contents for the new power system curriculum. It is also including the coordination between multiple relays in both a radial system and a looped system by using a software that widely used in industry area. By using the relay testing system, an advanced microprocessor-based relay, which is commonly used in industry, will be tested as well

The recent development of protection coordination schemes based on inverse of AC microgrid: A review

Integration of distributed generation systems and diversity of microgrid operations led to a change in the structure of the power system. Due to this conversion, new challenges have arisen when employing traditional overcurrent protection schemes. As a consequence, non‐classical protection schemes have attracted significant attention in the last few years. Engineers and scholars have proposed different non‐standard methods to increase the power protection system and ensure the highly selectivity performance. Although the non‐standard characteristics and their requirements, in general, have been outlined and analyzed in the available literature, protection coordination based on voltage current–time inverse, as a branch of non‐standard optimization methods, has not yet been thoroughly discussed, compared, or debated in detail. To close this gap, this review introduces a broad overview of recent research and developments of the voltage current–time inverse based protection coordination. Focuses on assessing the potential advantages and disadvantages of related studies and provide a classification and analysis of these studies. The future trends and some recommendations have been included in this review for improving fault detection sensitivity and coordination reliability

Highly sensitive multifunction protection coordination scheme for improved reliability of power systems with distributed generation (PVs)

The high penetration of distribution generators (DGs), such as photovoltaic (PV), has made optimal overcurrent coordination a major concern for power protection. In the literature, the conventional single or multi‐objective function (OF) for phase overcurrent relays (OCRs) scheme faces challenges in terms of stability, sensitivity, and selectivity to handle the integration of DGs and ground fault scenarios. In this work, a new optimal OCR coordination scheme has been developed as a multifunction scheme for phase and ground events using standard and non‐standard tripping characteristics. This research introduces and validates a coordinated optimum strategy based on two new optimization approaches, the Tug of War Optimization algorithm (TWO) and the Charged System Search algorithm (CSS), to mitigate the effects of DGs on fault currents and locations across the power network. Industrial software is used to create a case study of a CIGRE power network equipped with two 10 MW PV systems, and the results of the proposed new optimum coordination scheme are compared to traditional schemes. The findings show that the proposed multifunction OCR scheme is able to reduce the tripping time of OCRs over different fault and grid operation scenarios and increase the sensitivity of the relays in islanding operation mode

A Viable Residential DC Microgrid for Low Income Communities – Architecture, Protection and Education

The availability of fossil fuels in the future and the environmental effects such as the carbon footprint of the existing methodologies to produce electricity is an increasing area of concern. In rural areas of under-developed parts of the world, the problem is lack of access to electrification. DC microgrids have become a proven solution to electrification in these areas with demonstrated exceptional quality of power, high reliability, efficiency, and simplified integration between renewable energy sources (principally solar PV) and energy storage. In the United States, a different problem occurs that can be addressed with the same DC microgrid approach that is finding success internationally. In disinvested, underserved communities with high unemployment and low wages, households contribute a significant portion of their income towards the fixed cost of their electrical utility connection, which by law must be supplied to every household. In order to realize such a microgrid in these communities, there are three major areas which need to be accounted for. Firstly, there needs to be a custom architecture for the community under consideration and it needs to be economical to match the needs of the underserved community. Secondly, DC microgrid for home energy interconnection is potentially less complex and less expensive to deploy, operate and maintain however, faster protection is a key element to ensuring resilience, viability and adoptability. Lastly, these types of efforts will be sustainable only if the people in the community are educated and invested in the same as they are the key stakeholders in these systems. This dissertation presents an approach to make the DC Microgrid economically feasible for low income households by reducing the cost they incur on electric bills. The approach is to overlay a DC system into homes that have a utility feed in order to incorporate renewable energy usage into an urban setting for the express purpose of driving down individual household utility costs. The results show that the incorporation of a certain level of “smart” appliances and fixtures into the renovation of vacated homes and the use of a microgrid to enable sharing of renewable energy, such as solar power combined with energy storage, between homes in the proposed architecture yields the least expensive option for the patrons. The development of solid state circuit breakers that interface between the microgrid and the home DC power panels helps in faster protection of the DC system. In this dissertation, a SiC JFET based device is designed and built to protect against DC faults at a faster rate than the available solutions. The prototype is tested for verification and used to discriminate against short circuit faults and the results show the successful fault discrimination capabilities of the device. A basic system level simulation with the protection device is implemented using Real Time Hardware in the loop platform. Finally, as a part of engaging the community members, the high school kids in the area who might potentially be living in some of the houses in this community are being educated about the microgrid, appliances and other technologies to get a better understanding of STEM and hopefully inspiring them to pursue a career in STEM in the future