Noise analysis of modulated quantizer based on oversampled signals

In this paper, a noise analysis of a modulated quantizer is performed. If input signals are oversampled, then the quantization error could be reduced by modulating both the input and the output of the quantizer. The working principle is based on the fact that convolutions of bandpass signals would spread wider in the frequency spectrum than that of lowpass signals. Hence, by filtering the high frequency components, the signal-to-noise ratio (SNR) could be increased. Numerical simulation results show that the modulated quantization scheme could achieve an average of 13.0960dB to 21.4700dB improvements on SNR over the conventional scheme, depends on the types of bandlimited input signals

Output Filter Aware Optimization of the Noise Shaping Properties of {\Delta}{\Sigma} Modulators via Semi-Definite Programming

The Noise Transfer Function (NTF) of {\Delta}{\Sigma} modulators is typically designed after the features of the input signal. We suggest that in many applications, and notably those involving D/D and D/A conversion or actuation, the NTF should instead be shaped after the properties of the output/reconstruction filter. To this aim, we propose a framework for optimal design based on the Kalman-Yakubovich-Popov (KYP) lemma and semi-definite programming. Some examples illustrate how in practical cases the proposed strategy can outperform more standard approaches.Comment: 14 pages, 18 figures, journal. Code accompanying the paper is available at http://pydsm.googlecode.co

Adaptive design of delta sigma modulators

In this thesis, a genetic algorithm based on differential evolution (DE) is used to generate delta sigma modulator (DSM) noise transfer functions (NTFs). These NTFs outperform those generated by an iterative approach described by Schreier and implemented in the delsig Matlab toolbox. Several lowpass and bandpass DSMs, as well as DSM\u27s designed specifically for and very low intermediate frequency (VLIF) receivers are designed using the algorithm developed in this thesis and compared to designs made using the delsig toolbox. The NTFs designed using the DE algorithm always have a higher dynamic range and signal to noise ratio than those designed using the delsig toolbox

Noise Weighting in the Design of {\Delta}{\Sigma} Modulators (with a Psychoacoustic Coder as an Example)

A design flow for {\Delta}{\Sigma} modulators is illustrated, allowing quantization noise to be shaped according to an arbitrary weighting profile. Being based on FIR NTFs, possibly with high order, the flow is best suited for digital architectures. The work builds on a recent proposal where the modulator is matched to the reconstruction filter, showing that this type of optimization can benefit a wide range of applications where noise (including in-band noise) is known to have a different impact at different frequencies. The design of a multiband modulator, a modulator avoiding DC noise, and an audio modulator capable of distributing quantization artifacts according to a psychoacoustic model are discussed as examples. A software toolbox is provided as a general design aid and to replicate the proposed results.Comment: 5 pages, 18 figures, journal. Code accompanying the paper is available at http://pydsm.googlecode.co

A nonlinear image restoration framework using vector quantization

Vector quantization (VQ) is a powerful method used primarily in signal and image compression. In recent years, it has also been applied to various other image processing tasks, including image classification, histogram modification, and restoration. In this paper, we focus our attention on image restoration using VQ. We present a general framework that incorporates two other methods in the literature, and discuss our method that follows more naturally from this framework. With appropriate training data for the VQ codebook, this method can restore images beyond its diffraction limit. © 2004 IEEE.published_or_final_versio

Analysis of Nonlinear Behaviors, Design and Control of Sigma Delta Modulators

M PhilSigma delta modulators (SDMs) have been widely applied in analogue-to-digital (A/D) conversion for many years. SDMs are becoming more and more popular in power electronic circuits because it can be viewed and applied as oversampled A/D converters with low resolution quantizers. The basic structure of an SDM under analytical investigation consists of a loop filter and a low bit quantizer connected by a negative feedback loop. Although there are numerous advantages of SDMs over other A/D converters, the application of SDMs is limited by the unboundedness of the system states and their nonlinear behaviors. It was found that complex dynamical behaviors exist in low bit SDMs, and for a bandpass SDM, the state space dynamics can be represented by elliptic fractal patterns confined within two trapezoidal regions. In all, there are three types of nonlinear behaviors, namely fixed point, limit cycle and chaotic behaviors. Related to the unboundedness issue, divergent behavior of system states is also a commonly discovered phenomenon. Consequently, how to design and control the SDM so that the system states are bounded and the unwanted nonlinear behaviors are avoided is a hot research topic worthy of investigated. In our investigation, we perform analysis on such complex behaviors and determine a control strategy to maintain the boundedness of the system states and avoid the occurrence of limit cycle behavior. For the design problem, we impose constraints based on the performance of an SDM and determine an optimal design for the SDM. The results are significantly better than the existing approaches

Vector quantization

During the past ten years Vector Quantization (VQ) has developed from a theoretical possibility promised by Shannon's source coding theorems into a powerful and competitive technique for speech and image coding and compression at medium to low bit rates. In this survey, the basic ideas behind the design of vector quantizers are sketched and some comments made on the state-of-the-art and current research efforts

A sequential algorithm for training the SOM prototypes based on higher-order recursive equations

A novel training algorithm is proposed for the formation of Self-Organizing Maps (SOM). In the proposed model, the weights are updated incrementally by using a higher-order difference equation, which implements a low-pass digital filter. It is possible to improve selected features of the self-organization process with respect to the basic SOM by suitably designing the filter. Moreover, from this model, new visualization tools can be derived for cluster visualization and for monitoring the quality of the map

Combining nonlinear multiresolution system and vector quantization for still image compression

It is popular to use multiresolution systems for image coding and compression. However, general-purpose techniques such as filter banks and wavelets are linear. While these systems are rigorous, nonlinear features in the signals cannot be utilized in a single entity for compression. Linear filters are known to blur the edges. Thus, the low-resolution images are typically blurred, carrying little information. We propose and demonstrate that edge- preserving filters such as median filters can be used in generating a multiresolution system using the Laplacian pyramid. The signals in the detail images are small and localized in the edge areas. Principal component vector quantization (PCVQ) is used to encode the detail images. PCVQ is a tree-structured VQ which allows fast codebook design and encoding/decoding. In encoding, the quantization error at each level is fed back through the pyramid to the previous level so that ultimately all the error is confined to the first level. With simple coding methods, we demonstrate that images with PSNR 33 dB can be obtained at 0.66 bpp without the use of entropy coding. When the rate is decreased to 0.25 bpp, the PSNR of 30 dB can still be achieved. Combined with an earlier result, our work demonstrate that nonlinear filters can be used for multiresolution systems and image coding