Characterization of real-time computers

A real-time system consists of a computer controller and controlled processes. Despite the synergistic relationship between these two components, they have been traditionally designed and analyzed independently of and separately from each other; namely, computer controllers by computer scientists/engineers and controlled processes by control scientists. As a remedy for this problem, in this report real-time computers are characterized by performance measures based on computer controller response time that are: (1) congruent to the real-time applications, (2) able to offer an objective comparison of rival computer systems, and (3) experimentally measurable/determinable. These measures, unlike others, provide the real-time computer controller with a natural link to controlled processes. In order to demonstrate their utility and power, these measures are first determined for example controlled processes on the basis of control performance functionals. They are then used for two important real-time multiprocessor design applications - the number-power tradeoff and fault-masking and synchronization

Exploiting Adaptive Techniques to Improve Processor Energy Efficiency

Rapid device-miniaturization keeps on inducing challenges in building energy efficient microprocessors. As the size of the transistors continuously decreasing, more uncertainties emerge in their operations. On the other hand, integrating more and more transistors on a single chip accentuates the need to lower its supply-voltage. This dissertation investigates one of the primary device uncertainties - timing error, in microprocessor performance bottleneck in NTC era. Then it proposes various innovative techniques to exploit these opportunities to maintain processor energy efficiency, in the context of emerging challenges. Evaluated with the cross-layer methodology, the proposed approaches achieve substantial improvements in processor energy efficiency, compared to other start-of-art techniques

Inter-module Interfacing techniques for SoCs with multiple clock domains to address challenges in modern deep sub-micron technologies

Miniaturization of integrated circuits (ICs) due to the improvement in lithographic techniques in modem deep sub-micron (DSM) technologies allows several complex processing elements to coexist in one IC, which are called System-on-Chip. As a first contribution, this thesis quantitatively analyzes the severity of timing constraints associated with Clock Distribution Network (CDN) in modem DSM technologies and shows that different processing elements may work in different dock domains to alleviate these constraints. Such systems are known as Globally Asynchronous Locally Synchronous (GALS) systems. It is imperative that different processing elements of a GALS system need to communicate with each other through some interfacing technique, and these interfaces can be asynchronous or synchronous. Conventionally, the asynchronous interfaces are described at the Register Transfer Logic (RTL) or system level. Such designs are susceptible to certain design constraints that cannot be addressed at higher abstraction levels; crosstalk glitch is one such constraint. This thesis initially identifies, using an analytical model, the possibility of asynchronous interface malfunction due to crosstalk glitch propagation. Next, we characterize crosstalk glitch propagation under normal operating conditions for two different classes of asynchronous protocols, namely bundled data protocol based and delay insensitive asynchronous designs. Subsequently, we propose a logic abstraction level modeling technique, which provides a framework to the designer to verify the asynchronous protocols against crosstalk glitches. The utility of this modeling technique is demonstrated experimentally on a Xilinx Virtex-II Pro FPGA. Furthermore, a novel methodology is proposed to quench such crosstalk glitch propagation through gating the asynchronous interface from sending the signal during potential glitch vulnerable instances. This methodology is termed as crosstalk glitch gating. This technique is successfully applied to obtain crosstalk glitch quenching in the representative interfaces. This thesis also addresses the dock skew challenges faced by high-performance synchronous interfacing methodologies in modem DSM technologies. The proposed methodology allows communicating modules to run at a frequency that is independent of the dock skew. Leveraging a novel clock-scheduling algorithm, our technique permits a faster module to communicate safely with a slower module without slowing down. Safe data communications for mesochronous schemes and for the cases when communicating modules have dock frequency ratios of integer or coprime numbers are theoretically explained and experimentally demonstrated. A clock-scheduling technique to dynamically accommodate phase variations is also proposed. These methods are implemented to the Xilinx Virtex II Pro technology. Experiments prove that the proposed interfacing scheme allows modules to communicate data safely, for mesochronous schemes, at 350 MHz, which is the limit of the technology used, under a dock skew of more than twice the time period (i.e. a dock skew of 12 ns

Linearization of The Timing Analysis and Optimization of Level-Sensitive Circuits

This thesis describes a linear programming (LP) formulation applicable to the static timing analysis of large scale synchronous circuits with level-sensitive latches. The automatic timing analysis procedure presented here is composed of deriving the connectivity information, constructing the LP model and solving the clock period minimization problem of synchronous digital VLSI circuits. In synchronous circuits with level-sensitive latches, operation at a reduced clock period (higher clock frequency) is possible by takingadvantage of both non-zero clock skew scheduling and time borrowing. Clock skew schedulingis performed in order to exploit the benefits of nonidentical clock signal delays on circuit timing. The time borrowing property of level-sensitive circuits permits higher operating frequencies compared to edge-sensitivecircuits. Considering time borrowing in the timing analysis, however, introduces non-linearity in this timing analysis. The modified big M (MBM) method is defined in order to transform the non-linear constraints arising in the problem formulation into solvable linear constraints. Equivalent LP model problemsfor single-phase clock synchronization of the ISCAS'89 benchmark circuits are generated and these problems are solved by the industrial LP solver CPLEX. Through the simultaneous application of time borrowing and clock skew scheduling, up to 63% improvements are demonstrated in minimum clock period with respect to zero-skew edge-sensitive synchronous circuits. The timing constraints governing thelevel-sensitive synchronous circuit operation not only solve the clock period minimization problem but also provide a common framework for the general timing analysis of such circuits. The inclusion of additional constraints into the problem formulation in order to meet the timing requirements imposed by specific applicationenvironments is discussed

로직 및 피지컬 합성에서의 타이밍 분석과 최적화

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2020. 8. 김태환.Timing analysis is one of the necessary steps in the development of a semiconductor circuit. In addition, it is increasingly important in the advanced process technologies due to various factors, including the increase of process–voltage–temperature variation. This dissertation addresses three problems related to timing analysis and optimization in logic and physical synthesis. Firstly, most static timing analysis today are based on conventional fixed flip-flop timing models, in which every flip-flop is assumed to have a fixed clock-to-Q delay. However, setup and hold skews affect the clock-to-Q delay in reality. In this dissertation, I propose a mathematical formulation to solve the problem and apply it to the clock skew scheduling problems as well as to the analysis of a given circuit, with a scalable speedup technique. Secondly, near-threshold computing is one of the promising concepts for energy-efficient operation of VLSI systems, but wide performance variation and nonlinearity to process variations block the proliferation. To cope with this, I propose a holistic hardware performance monitoring methodology for accurate timing prediction in a near-threshold voltage regime and advanced process technology. Lastly, an asynchronous circuit is one of the alternatives to the conventional synchronous style, and asynchronous pipeline circuit especially attractive because of its small design effort. This dissertation addresses the synthesis problem of lightening two-phase bundled-data asynchronous pipeline controllers, in which delay buffers are essential for guaranteeing the correct handshaking operation but incurs considerable area increase.타이밍 분석은 반도체 회로 개발 필수 과정 중 하나로, 최신 공정일수록 공정-전압-온도 변이 증가를 포함한 다양한 요인으로 하여금 그 중요성이 커지고 있다. 본 논문에서는 로직 및 피지컬 합성과 관련하여 세 가지 타이밍 분석 및 최적화 문제에 대해 다룬다. 첫째로, 오늘날 대부분의 정적 타이밍 분석은 모든 플립-플롭의 클럭-출력 딜레이가 고정된 값이라는 가정을 바탕으로 이루어졌다. 하지만 실제 클럭-출력 딜레이는 해당 플립-플롭의 셋업 및 홀드 스큐에 영향을 받는다. 본 논문에서는 이러한 특성을 수학적으로 정리하였으며, 이를 확장 가능한 속도 향상 기법과 더불어 주어진 회로의 타이밍 분석 및 클럭 스큐 스케쥴링 문제에 적용하였다. 둘째로, 유사 문턱 연산은 초고집적 회로 동작의 에너지 효율을 끌어 올릴 수 있다는 점에서 각광받지만, 큰 폭의 성능 변이 및 비선형성 때문에 널리 활용되고 있지 않다. 이를 해결하기 위해 유사 문턱 전압 영역 및 최신 공정 노드에서 보다 정확한 타이밍 예측을 위한 하드웨어 성능 모니터링 방법론 전반을 제안하였다. 마지막으로, 비동기 회로는 기존 동기 회로의 대안 중 하나로, 그 중에서도 비동기 파이프라인 회로는 비교적 적은 설계 노력만으로도 구현 가능하다는 장점이 있다. 본 논문에서는 2위상 묶음 데이터 프로토콜 기반 비동기 파이프라인 컨트롤러 상에서, 정확한 핸드셰이킹 통신을 위해 삽입된 딜레이 버퍼에 의한 면적 증가를 완화할 수 있는 합성 기법을 제시하였다.1 INTRODUCTION 1 1.1 Flexible Flip-Flop Timing Model 1 1.2 Hardware Performance Monitoring Methodology 4 1.3 Asynchronous Pipeline Controller 10 1.4 Contributions of this Dissertation 15 2 ANALYSIS AND OPTIMIZATION CONSIDERING FLEXIBLE FLIP-FLOP TIMING MODEL 17 2.1 Preliminaries 17 2.1.1 Terminologies 17 2.1.2 Timing Analysis 20 2.1.3 Clock-to-Q Delay Surface Modeling 21 2.2 Clock-to-Q Delay Interval Analysis 22 2.2.1 Derivation 23 2.2.2 Additional Constraints 26 2.2.3 Analysis: Finding Minimum Clock Period 28 2.2.4 Optimization: Clock Skew Scheduling 30 2.2.5 Scalable Speedup Technique 33 2.3 Experimental Results 37 2.3.1 Application to Minimum Clock Period Finding 37 2.3.2 Application to Clock Skew Scheduling 39 2.3.3 Efficacy of Scalable Speedup Technique 43 2.4 Summary 44 3 HARDWARE PERFORMANCE MONITORING METHODOLOGY AT NTC AND ADVANCED TECHNOLOGY NODE 45 3.1 Overall Flow of Proposed HPM Methodology 45 3.2 Prerequisites to HPM Methodology 47 3.2.1 BEOL Process Variation Modeling 47 3.2.2 Surrogate Model Preparation 49 3.3 HPM Methodology: Design Phase 52 3.3.1 HPM2PV Model Construction 52 3.3.2 Optimization of Monitoring Circuits Configuration 54 3.3.3 PV2CPT Model Construction 58 3.4 HPM Methodology: Post-Silicon Phase 60 3.4.1 Transfer Learning in Silicon Characterization Step 60 3.4.2 Procedures in Volume Production Phase 61 3.5 Experimental Results 62 3.5.1 Experimental Setup 62 3.5.2 Exploration of Monitoring Circuits Configuration 64 3.5.3 Effectiveness of Monitoring Circuits Optimization 66 3.5.4 Considering BEOL PVs and Uncertainty Learning 68 3.5.5 Comparison among Different Prediction Flows 69 3.5.6 Effectiveness of Prediction Model Calibration 71 3.6 Summary 73 4 LIGHTENING ASYNCHRONOUS PIPELINE CONTROLLER 75 4.1 Preliminaries and State-of-the-Art Work 75 4.1.1 Bundled-data vs. Dual-rail Asynchronous Circuits 75 4.1.2 Two-phase vs. Four-phase Bundled-data Protocol 76 4.1.3 Conventional State-of-the-Art Pipeline Controller Template 77 4.2 Delay Path Sharing for Lightening Pipeline Controller Template 78 4.2.1 Synthesizing Sharable Delay Paths 78 4.2.2 Validating Logical Correctness for Sharable Delay Paths 80 4.2.3 Reformulating Timing Constraints of Controller Template 81 4.2.4 Minimally Allocating Delay Buffers 87 4.3 In-depth Pipeline Controller Template Synthesis with Delay Path Reusing 88 4.3.1 Synthesizing Delay Path Units 88 4.3.2 Validating Logical Correctness of Delay Path Units 89 4.3.3 Updating Timing Constraints for Delay Path Units 91 4.3.4 In-depth Synthesis Flow Utilizing Delay Path Units 95 4.4 Experimental Results 99 4.4.1 Environment Setup 99 4.4.2 Piecewise Linear Modeling of Delay Path Unit Area 99 4.4.3 Comparison of Power, Performance, and Area 102 4.5 Summary 107 5 CONCLUSION 109 5.1 Chapter 2 109 5.2 Chapter 3 110 5.3 Chapter 4 110 Abstract (In Korean) 127Docto

Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 2: Army fault tolerant architecture design and analysis

Described here is the Army Fault Tolerant Architecture (AFTA) hardware architecture and components and the operating system. The architectural and operational theory of the AFTA Fault Tolerant Data Bus is discussed. The test and maintenance strategy developed for use in fielded AFTA installations is presented. An approach to be used in reducing the probability of AFTA failure due to common mode faults is described. Analytical models for AFTA performance, reliability, availability, life cycle cost, weight, power, and volume are developed. An approach is presented for using VHSIC Hardware Description Language (VHDL) to describe and design AFTA's developmental hardware. A plan is described for verifying and validating key AFTA concepts during the Dem/Val phase. Analytical models and partial mission requirements are used to generate AFTA configurations for the TF/TA/NOE and Ground Vehicle missions

Advanced Timing and Synchronization Methodologies for Digital VLSI Integrated Circuits

This dissertation addresses timing and synchronization methodologies that are critical to the design, analysis and optimization of high-performance, integrated digital VLSI systems. As process sizes shrink and design complexities increase, achieving timing closure for digital VLSI circuits becomes a significant bottleneck in the integrated circuit design flow. Circuit designers are motivated to investigate and employ alternative methods to satisfy the timing and physical design performance targets. Such novel methods for the timing and synchronization of complex circuitry are developed in this dissertation and analyzed for performance and applicability.Mainstream integrated circuit design flow is normally tuned for zero clock skew, edge-triggered circuit design. Non-zero clock skew or multi-phase clock synchronization is seldom used because the lack of design automation tools increases the length and cost of the design cycle. For similar reasons, level-sensitive registers have not become an industry standard despite their superior size, speed and power consumption characteristics compared to conventional edge-triggered flip-flops.In this dissertation, novel design and analysis techniques that fully automate the design and analysis of non-zero clock skew circuits are presented. Clock skew scheduling of both edge-triggered and level-sensitive circuits are investigated in order to exploit maximum circuit performances. The effects of multi-phase clocking on non-zero clock skew, level-sensitive circuits are investigated leading to advanced synchronization methodologies. Improvements in the scalability of the computational timing analysis process with clock skew scheduling are explored through partitioning and parallelization.The integration of the proposed design and analysis methods to the physical design flow of integrated circuits synchronized with a next-generation clocking technology-resonant rotary clocking technology-is also presented. Based on the design and analysis methods presented in this dissertation, a computer-aided design tool for the design of rotary clock synchronized integrated circuits is developed

Analysis and optimization of VLSI Clock Distribution Networks for skew variability reduction

As VLSI technology moves into the Ultra-Deep Sub-Micron (UDSM) era, manufacturing variations, power supply noise and temperature variations greatly affect the performance and yield of VLSI circuits. Clock Distribution Network (CDN), which is one of the biggest and most important nets in any synchronous VLSI chip, is especially sensitive to these variations. To address this problem variability-aware analysis and optimization techniques for VLSI circuits are needed. In the first part of this thesis an analytical bound for the unwanted skew due to interconnect variation is established. Experimental results show that this bound is safer, tighter and computationally faster than existing approaches. This bound could be used in variation-aware clock tree synthesis.The second part of the thesis deals with optimizing a given clock tree to minimize the unwanted skew variations. Non-tree CDNs have been recognized as a promising approach to overcome the variation problem. We propose a novel non-tree CDN obtained by adding cross links in an existing clock tree. We analyze the effect of the link insertion on clock skew variability and propose link insertion schemes. The non-tree CDNs so obtained are shown to be highly tolerant to skew variability with very little increase in total wire-length. This can be used in applications such as ASIC design where a significant increase in the total wire-length is unacceptable

Variation and power issues in VLSI clock networks

Clock Distribution Network (CDN) is an important component of any synchronous logic circuit. The function of CDN is to deliver the clock signal to the clock sinks. Clock skew is defined as the difference in the arrival time of the clock signal at the clock sinks. Higher uncertainty in skew (due to PVT variations) degrades circuit performance by decreasing the maximum possible delay between any two sequential elements. Aggressive frequency scaling has also led to high power consumption especially in CDN. This dissertation addresses variation and power issues in the design of current and potential future CDN. The research detailed in this work presents algorithmic techniques for the following problems: (1) Variation tolerance in useful skew design, (2) Link insertion for buffered clock nets, (3) Methodology and algorithms for rotary clocking and (4) Clock mesh optimization for skew-power trade off. For clock trees this dissertation presents techniques to integrate the different aspects of clock tree synthesis (skew scheduling, abstract topology and layout embedding) into one framework- tolerance to variations. This research addresses the issues involved in inserting cross-links in a buffered clock tree and proposes design criteria to avoid the risk of short-circuit current. Rotary clocking is a promising new clocking scheme that consists of unterminated rings formed by differential transmission lines. Rotary clocking achieves reduction in power dissipation clock skew. This dissertation addresses the issues in adopting current CAD methodology to rotary clocks. Alternative methodology and corresponding algorithmic techniques are detailed. Clock mesh is a popular form of CDN used in high performance systems. The problem of simultaneous sizing and placement of mesh buffers in a clock mesh is addressed. The algorithms presented remove the edges from the clock mesh to trade off skew tolerance for low power. For clock trees as well as link insertion, our experiments indicate significant reduction in clock skew due to variations. For clock mesh, experimental results indicate 18.5% reduction in power with 1.3% delay penalty on a average. In summary, this dissertation details methodologies/algorithms that address two critical issues- variation and power dissipation in current and potential future CDN