35,569 research outputs found
On-body wearable repeater as a data link relay for in-body wireless implants
Wireless medical devices implanted at different locations in the human body have a wide application range. Yet, high-data-rate communication in the 2.4-GHz Industrial, Scientific, and Medical band suffers from high in-body attenuation loss. Link improvement cannot be obtained by simply increasing transmit power, as battery life is limited and in-body absorption has to remain low. To overcome these problems, a flexible on-body textile patch antenna, robustly matched directly to the human body, is designed and developed as part of a wearable repeater, enhancing communication with implanted wireless devices. This receive antenna, which can cope with different morphologies and patient movements, enables reliable high data rate and low-power communication links with an implant. A data link measurement is performed for the on-body repeater system placed on the human torso, relaying the signals to nearby medical equipment, without wired connection to the patient. The performance of the data link is experimentally assessed in different measurement scenarios. For a repeater system relying on simple analog amplification, which is low-cost, energy-efficient, and can be fully integrated into clothing, excellent results are obtained, with an average measured signal-to-noise ratio of 33 dB for tissue depths up to 85 mm
Wireless body sensor networks for health-monitoring applications
This is an author-created, un-copyedited version of an article accepted for publication in
Physiological Measurement. The publisher is
not responsible for any errors or omissions in this version of the manuscript or any version
derived from it. The Version of Record is available online at http://dx.doi.org/10.1088/0967-3334/29/11/R01
Mobile Health Care over 3G Networks: the MobiHealth Pilot System and Service
Health care is one of the most prominent areas for the application of wireless technologies. New services and applications are today under research and development targeting different areas of health care, from high risk and chronic patientsâ remote monitoring to mobility tools for the medical personnel. In this direction the MobiHealth project developed and trailed a system and a service that is using UMTS for the continuous monitoring and transmission of vital signals, like Pulse Oximeter sensor , temperature, Marker, Respiratory band, motion/activity detector etc., to the hospital. The system, based on the concept of the Body Area Network, is highly customisable, allowing sensors to be seamlessly connected and transmit the monitored vital signal measurements. The system and service was trialed in 4 European countries and it is presently under market validation
Smart vest for respiratory rate monitoring of COPD patients based on non-contact capacitive sensing
In this paper, a first approach to the design of a portable device for non-contact monitoring
of respiratory rate by capacitive sensing is presented. The sensing system is integrated into a smart
vest for an untethered, low-cost and comfortable breathing monitoring of Chronic Obstructive
Pulmonary Disease (COPD) patients during the rest period between respiratory rehabilitation
exercises at home. To provide an extensible solution to the remote monitoring using this sensor and
other devices, the design and preliminary development of an e-Health platform based on the Internet
of Medical Things (IoMT) paradigm is also presented. In order to validate the proposed solution,
two quasi-experimental studies have been developed, comparing the estimations with respect to the
golden standard. In a first study with healthy subjects, the mean value of the respiratory rate error,
the standard deviation of the error and the correlation coefficient were 0.01 breaths per minute (bpm),
0.97 bpm and 0.995 (p < 0.00001), respectively. In a second study with COPD patients, the values
were -0.14 bpm, 0.28 bpm and 0.9988 (p < 0.0000001), respectively. The results for the rest period
show the technical and functional feasibility of the prototype and serve as a preliminary validation of
the device for respiratory rate monitoring of patients with COPD.Ministerio de Ciencia e InnovaciĂłn PI15/00306Ministerio de Ciencia e InnovaciĂłn DTS15/00195Junta de AndalucĂa PI-0010-2013Junta de AndalucĂa PI-0041-2014Junta de AndalucĂa PIN-0394-201
Medical data processing and analysis for remote health and activities monitoring
Recent developments in sensor technology, wearable computing, Internet of Things (IoT), and wireless communication have given rise to research in ubiquitous healthcare and remote monitoring of human\u2019s health and activities. Health monitoring systems involve processing and analysis of data retrieved from smartphones, smart watches, smart bracelets, as well as various sensors and wearable devices. Such systems enable continuous monitoring of patients psychological and health conditions by sensing and transmitting measurements such as heart rate, electrocardiogram, body temperature, respiratory rate, chest sounds, or blood pressure. Pervasive healthcare, as a relevant application domain in this context, aims at revolutionizing the delivery of medical services through a medical assistive environment and facilitates the independent living of patients. In this chapter, we discuss (1) data collection, fusion, ownership and privacy issues; (2) models, technologies and solutions for medical data processing and analysis; (3) big medical data analytics for remote health monitoring; (4) research challenges and opportunities in medical data analytics; (5) examples of case studies and practical solutions
MobiHealth-Innovative 2.5/3G mobile services and applications for health care
MobiHealth aims at introducing new mobile value added services in the area of healthcare, based on 2.5 (GPRS) and 3G (UMTS) technologies, thus promoting the use and deployment of GPRS and UMTS. This will be achieved by the integration of sensors and actuators to a Wireless Body Area Network (BAN). These sensors and actuators will continuously measure and transmit vital constants along with audio and video to health service providers and brokers, improving on one side the life of patients and allowing on the other side the introduction of new value-added services in the areas of disease prevention and diagnostic, remote assistance, para-health services, physical state monitoring (sports) and even clinical research. Furthermore, the MobiHealth BAN system will support the fast and reliable application of remote assistance in case of accidents by allowing the paramedics to send reliable vital constants data as well as audio and video directly from the accident site
Implementing and Evaluating a Wireless Body Sensor System for Automated Physiological Data Acquisition at Home
Advances in embedded devices and wireless sensor networks have resulted in
new and inexpensive health care solutions. This paper describes the
implementation and the evaluation of a wireless body sensor system that
monitors human physiological data at home. Specifically, a waist-mounted
triaxial accelerometer unit is used to record human movements. Sampled data are
transmitted using an IEEE 802.15.4 wireless transceiver to a data logger unit.
The wearable sensor unit is light, small, and consumes low energy, which allows
for inexpensive and unobtrusive monitoring during normal daily activities at
home. The acceleration measurement tests show that it is possible to classify
different human motion through the acceleration reading. The 802.15.4 wireless
signal quality is also tested in typical home scenarios. Measurement results
show that even with interference from nearby IEEE 802.11 signals and microwave
ovens, the data delivery performance is satisfactory and can be improved by
selecting an appropriate channel. Moreover, we found that the wireless signal
can be attenuated by housing materials, home appliances, and even plants.
Therefore, the deployment of wireless body sensor systems at home needs to take
all these factors into consideration.Comment: 15 page
- âŠ