Methods and problems of wavelength-routing in all-optical networks

We give a survey of recent theoretical results obtained for wavelength-routing in all-optical networks. The survey is based on the previous survey in [Beauquier, B., Bermond, J-C., Gargano, L., Hell, P., Perennes, S., Vaccaro, U.: Graph problems arising from wavelength-routing in all-optical networks. In: Proc. of the 2nd Workshop on Optics and Computer Science, part of IPPS'97, 1997]. We focus our survey on the current research directions and on the used methods. We also state several open problems connected with this line of research, and give an overview of several related research directions

Dynamic grooming in IP over WDM networks: A study with realistic traffic based on GANCLES simulation package

Abstract — Dynamic grooming capabilities lies at the hearth of many envisaged scenarios for IP over Optical networks, but studies on its performance are still in their infancy. This work addresses two fundamental aspects of the problem. First of all it presents a novel tool for the study of IP over Optical networks. The tool, freely available on-line, is a network level simulator named GANCLES that includes several innovative features allowing the study of realistic scenarios in IP over Optical networking, making it an ideal tool for Traffic Engineering purposes. GANCLES architecture enables the simulation of dynamic traffic grooming on top of a realistic network model that correctly describes the logical interaction between the optical and the IP layer, i.e., the mutual relationship between routing algorithms and lightpath assignment procedures at the optical layer and routing at th

Routing and wavelength assignment in WDM optical networks

In this thesis, we focus on the routing and wavelength assignment problems in WDM all-optical networks. Since the general problem is difficult (NP-complete), we classify the problem into several models with different formulations. Our objectives are to analyze some subclasses of routing and wavelength assignment problems; to understand their special properties; to estimate algorithm bounds and performance; and, to design efficient heuristic algorithms. These goals are important because results that follow can help engineers design efficient network topologies and protocols, and eventually provide end-users with cost-effective high bandwidth.;We first study the off-line wavelength assignment problem in single fiber ring and tree networks: an optimal algorithm and an exact characterization of the optimal solution is given for binary and ternary tree topologies; an open problem based on path length restriction on trees, mentioned in the literature, is solved; and bounds are given for path-length and covering restrictions of the problem on ring networks. Then we consider multifiber optical networks, in which each link has several parallel fibers. We extend a stochastic model from the single-fiber case to the multifiber case and show that multifiber links can improve performance significantly. For some specific networks, such as ring and tree networks, we obtain some performance bounds. The bounds support our multifiber stochastic model conclusion. For practical importance, we also consider a WDM optical ring network architecture configuration problem as well as cost-effectiveness. We propose several WDM ring networks with limited fiber switching and limited wavelength conversion and these networks achieve almost optimal wavelength utilization. Attacking resource allocation within an WDM optical ring network to reduce overall equipment cost, we design a new algorithm and our simulation results indicate improvement of about 25%. This thesis also includes a new coloring problem partition-coloring and its applications.;In summary, the contributions in this thesis include several heuristic algorithms and theoretical tight upper bounds for both single fiber and multifiber all-optical networks. In particular, for ring networks we have proposed several network architectures to improve wavelength utilization and devised a new algorithm that combines routing and wavelength assignment to reduce hardware costs

Logical topology design for IP rerouting: ASONs versus static OTNs

IP-based backbone networks are gradually moving to a network model consisting of high-speed routers that are flexibly interconnected by a mesh of light paths set up by an optical transport network that consists of wavelength division multiplexing (WDM) links and optical cross-connects. In such a model, the generalized MPLS protocol suite could provide the IP centric control plane component that will be used to deliver rapid and dynamic circuit provisioning of end-to-end optical light paths between the routers. This is called an automatic switched optical (transport) network (ASON). An ASON enables reconfiguration of the logical IP topology by setting up and tearing down light paths. This allows to up- or downgrade link capacities during a router failure to the capacities needed by the new routing of the affected traffic. Such survivability against (single) IP router failures is cost-effective, as capacity to the IP layer can be provided flexibly when necessary. We present and investigate a logical topology optimization problem that minimizes the total amount or cost of the needed resources (interfaces, wavelengths, WDM line-systems, amplifiers, etc.) in both the IP and the optical layer. A novel optimization aspect in this problem is the possibility, as a result of the ASON, to reuse the physical resources (like interface cards and WDM line-systems) over the different network states (the failure-free and all the router failure scenarios). We devised a simple optimization strategy to investigate the cost of the ASON approach and compare it with other schemes that survive single router failures

Unidirectional Quorum-based Cycle Planning for Efficient Resource Utilization and Fault-Tolerance

In this paper, we propose a greedy cycle direction heuristic to improve the generalized $\mathbf{R}$ redundancy quorum cycle technique. When applied using only single cycles rather than the standard paired cycles, the generalized $\mathbf{R}$ redundancy technique has been shown to almost halve the necessary light-trail resources in the network. Our greedy heuristic improves this cycle-based routing technique's fault-tolerance and dependability. For efficiency and distributed control, it is common in distributed systems and algorithms to group nodes into intersecting sets referred to as quorum sets. Optimal communication quorum sets forming optical cycles based on light-trails have been shown to flexibly and efficiently route both point-to-point and multipoint-to-multipoint traffic requests. Commonly cycle routing techniques will use pairs of cycles to achieve both routing and fault-tolerance, which uses substantial resources and creates the potential for underutilization. Instead, we use a single cycle and intentionally utilize $\mathbf{R}$ redundancy within the quorum cycles such that every point-to-point communication pairs occur in at least $\mathbf{R}$ cycles. Without the paired cycles the direction of the quorum cycles becomes critical to the fault tolerance performance. For this we developed a greedy cycle direction heuristic and our single fault network simulations show a reduction of missing pairs by greater than 30%, which translates to significant improvements in fault coverage.Comment: Computer Communication and Networks (ICCCN), 2016 25th International Conference on. arXiv admin note: substantial text overlap with arXiv:1608.05172, arXiv:1608.05168, arXiv:1608.0517

A Novel Network Coded Parallel Transmission Framework for High-Speed Ethernet

Parallel transmission, as defined in high-speed Ethernet standards, enables to use less expensive optoelectronics and offers backwards compatibility with legacy Optical Transport Network (OTN) infrastructure. However, optimal parallel transmission does not scale to large networks, as it requires computationally expensive multipath routing algorithms to minimize differential delay, and thus the required buffer size, optimize traffic splitting ratio, and ensure frame synchronization. In this paper, we propose a novel framework for high-speed Ethernet, which we refer to as network coded parallel transmission, capable of effective buffer management and frame synchronization without the need for complex multipath algorithms in the OTN layer. We show that using network coding can reduce the delay caused by packet reordering at the receiver, thus requiring a smaller overall buffer size, while improving the network throughput. We design the framework in full compliance with high-speed Ethernet standards specified in IEEE802.3ba and present solutions for network encoding, data structure of coded parallel transmission, buffer management and decoding at the receiver side. The proposed network coded parallel transmission framework is simple to implement and represents a potential major breakthrough in the system design of future high-speed Ethernet.Comment: 6 pages, 8 figures, Submitted to Globecom201

Energy-efficient traffic engineering

The energy consumption in telecommunication networks is expected to grow considerably, especially in core networks. In this chapter, optimization of energy consumption is approached from two directions. In a first study, multilayer traffic engineering (MLTE) is used to assign energy-efficient paths and logical topology to IP traffic. The relation with traditional capacity optimization is explained, and the MLTE strategy is applied for daily traffic variations. A second study considers the core network below the IP layer, giving a detailed power consumption model. Optical bypass is evaluated as a technique to achieve considerable power savings over per-hop opticalelectronicoptical regeneration. Document type: Part of book or chapter of boo