On the Effects of Battery Imperfections in an Energy Harvesting Device

Energy Harvesting allows the devices in a Wireless Sensor Network to recharge their batteries through environmental energy sources. While in the literature the main focus is on devices with ideal batteries, in reality several inefficiencies have to be considered to correctly design the operating regimes of an Energy Harvesting Device (EHD). In this work we describe how the throughput optimization problem changes under \emph{real battery} constraints in an EHD. In particular, we consider imperfect knowledge of the state of charge of the battery and storage inefficiencies, \emph{i.e.}, part of the harvested energy is wasted in the battery recharging process. We formulate the problem as a Markov Decision Process, basing our model on some realistic observations about transmission, consumption and harvesting power. We find the performance upper bound with a real battery and numerically discuss the novelty introduced by the real battery effects. We show that using the \emph{old} policies obtained without considering the real battery effects is strongly sub-optimal and may even result in zero throughput.Comment: In Proc. IEEE International Conference on Computing, Networking and Communications, pp. 942-948, Feb. 201

Energy Harvesting Wireless Communications: A Review of Recent Advances

This article summarizes recent contributions in the broad area of energy harvesting wireless communications. In particular, we provide the current state of the art for wireless networks composed of energy harvesting nodes, starting from the information-theoretic performance limits to transmission scheduling policies and resource allocation, medium access and networking issues. The emerging related area of energy transfer for self-sustaining energy harvesting wireless networks is considered in detail covering both energy cooperation aspects and simultaneous energy and information transfer. Various potential models with energy harvesting nodes at different network scales are reviewed as well as models for energy consumption at the nodes.Comment: To appear in the IEEE Journal of Selected Areas in Communications (Special Issue: Wireless Communications Powered by Energy Harvesting and Wireless Energy Transfer

Towards Self-Control of Service Rate for Battery Management in Energy Harvesting Devices

We consider the operation of an energy harvesting wireless device (sensor node) powered by a rechargeable battery, taking non-idealities into account. In particular, we consider sudden decrease and increase of the battery level (leakage and charge recovery consequently) due to the inner diffusion processes in the battery. These processes are affecting the stability of the device operation. In particular, leakage accelerates the depletion of the battery, which results in inactive periods of the device and, thus, potential data loss. In this paper, we propose a simplified self-control management of a battery expressed by restrictions, which could be used for an efficient operational strategy of the device. To achieve this, we rely on the double-queue model which includes the imperfections of the battery operation and bi-dimensional battery value. This includes both apparent, i.e., available at the electrodes and true energy levels of a battery. These levels can be significantly different because of deep discharge events and can equalize thanks to charge recovery effect. We performed some simulation and observed that we can diminish the models variable number to predict possible unwanted events such as apparent discharge events (when the areas near electrodes are depleted while other areas of the battery still contain some energy) and data losses. This observation helps to achieve sufficiently effective self-control management by knowing and managing just few parameters, and therefore offers valuable directions for the development of autonomic and self-sustainable operation

Optimization of the overall success probability of the energy harvesting cognitive wireless sensor networks

Wireless energy harvesting can improve the performance of cognitive wireless sensor networks (WSNs). This paper considers radio frequency (RF) energy harvesting from transmissions in the primary spectrum for cognitive WSNs. The overall success probability of the energy harvesting cognitive WSN depends on the transmission success probability and energy success probability. Using the tools from stochastic geometry, we show that the overall success probability can be optimized with respect to: 1) transmit power of the sensors; 2) transmit power of the primary transmitters; and 3) spatial density of the primary transmitters. In this context, an optimization algorithm is proposed to maximize the overall success probability of the WSNs. Simulation results show that the overall success probability and the throughput of the WSN can be significantly improved by optimizing the aforementioned three parameters. As RF energy harvesting can also be performed indoors, hence, our solution can be directly applied to the cognitive WSNs that are installed in smart buildings

Communicating Using an Energy Harvesting Transmitter: Optimum Policies Under Energy Storage Losses

In this paper, short-term throughput optimal power allocation policies are derived for an energy harvesting transmitter with energy storage losses. In particular, the energy harvesting transmitter is equipped with a battery that loses a fraction of its stored energy. Both single user, i.e. one transmitter-one receiver, and the broadcast channel, i.e., one transmitter-multiple receiver settings are considered, initially with an infinite capacity battery. It is shown that the optimal policies for these models are threshold policies. Specifically, storing energy when harvested power is above an upper threshold, retrieving energy when harvested power is below a lower threshold, and transmitting with the harvested energy in between is shown to maximize the weighted sum-rate. It is observed that the two thresholds are related through the storage efficiency of the battery, and are nondecreasing during the transmission. The results are then extended to the case with finite battery capacity, where it is shown that a similar double-threshold structure arises but the thresholds are no longer monotonic. A dynamic program that yields an optimal online power allocation is derived, and is shown to have a similar double-threshold structure. A simpler online policy is proposed and observed to perform close to the optimal policy.Comment: Submitted to IEEE Transactions on Wireless Communications, August 201

Joint Transmission and Energy Transfer Policies for Energy Harvesting Devices with Finite Batteries

One of the main concerns in traditional Wireless Sensor Networks (WSNs) is energy efficiency. In this work, we analyze two techniques that can extend network lifetime. The first is Ambient \emph{Energy Harvesting} (EH), i.e., the capability of the devices to gather energy from the environment, whereas the second is Wireless \emph{Energy Transfer} (ET), that can be used to exchange energy among devices. We study the combination of these techniques, showing that they can be used jointly to improve the system performance. We consider a transmitter-receiver pair, showing how the ET improvement depends upon the statistics of the energy arrivals and the energy consumption of the devices. With the aim of maximizing a reward function, e.g., the average transmission rate, we find performance upper bounds with and without ET, define both online and offline optimization problems, and present results based on realistic energy arrivals in indoor and outdoor environments. We show that ET can significantly improve the system performance even when a sizable fraction of the transmitted energy is wasted and that, in some scenarios, the online approach can obtain close to optimal performance.Comment: 16 pages, 12 figure

Optimal Save-Then-Transmit Protocol for Energy Harvesting Wireless Transmitters

In this paper, the design of a wireless communication device relying exclusively on energy harvesting is considered. Due to the inability of rechargeable energy sources to charge and discharge at the same time, a constraint we term the energy half-duplex constraint, two rechargeable energy storage devices (ESDs) are assumed so that at any given time, there is always one ESD being recharged. The energy harvesting rate is assumed to be a random variable that is constant over the time interval of interest. A save-then-transmit (ST) protocol is introduced, in which a fraction of time {\rho} (dubbed the save-ratio) is devoted exclusively to energy harvesting, with the remaining fraction 1 - {\rho} used for data transmission. The ratio of the energy obtainable from an ESD to the energy harvested is termed the energy storage efficiency, {\eta}. We address the practical case of the secondary ESD being a battery with {\eta} < 1, and the main ESD being a super-capacitor with {\eta} = 1. The optimal save-ratio that minimizes outage probability is derived, from which some useful design guidelines are drawn. In addition, we compare the outage performance of random power supply to that of constant power supply over the Rayleigh fading channel. The diversity order with random power is shown to be the same as that of constant power, but the performance gap can be large. Furthermore, we extend the proposed ST protocol to wireless networks with multiple transmitters. It is shown that the system-level outage performance is critically dependent on the relationship between the number of transmitters and the optimal save-ratio for single-channel outage minimization. Numerical results are provided to validate our proposed study.Comment: This is the longer version of a paper to appear in IEEE Transactions on Wireless Communication