5,409 research outputs found
On the MIMO Channel Capacity of Multi-Dimensional Signal Sets
In this contribution we evaluate the capacity of Multi-Input Multi-Output (MIMO) systems using multi-dimensional PSK/QAM signal sets. It was shown that transmit diversity is capable of narrowing the gap between the capacity of the Rayleigh-fading channel and the AWGN channel. However, since this gap becomes narrower when the receiver diversity order is increased, for higher-order receiver diversity the performance advantage of transmit diversity diminishes. A MIMO system having full multiplexing gain has a higher achievable throughput than the corresponding MIMO system designed for full diversity gain, although this is attained at the cost of a higher complexity and a higher SNR. The tradeoffs between diversity gain, multiplexing gain, complexity and bandwidth are studied
AirSync: Enabling Distributed Multiuser MIMO with Full Spatial Multiplexing
The enormous success of advanced wireless devices is pushing the demand for
higher wireless data rates. Denser spectrum reuse through the deployment of
more access points per square mile has the potential to successfully meet the
increasing demand for more bandwidth. In theory, the best approach to density
increase is via distributed multiuser MIMO, where several access points are
connected to a central server and operate as a large distributed multi-antenna
access point, ensuring that all transmitted signal power serves the purpose of
data transmission, rather than creating "interference." In practice, while
enterprise networks offer a natural setup in which distributed MIMO might be
possible, there are serious implementation difficulties, the primary one being
the need to eliminate phase and timing offsets between the jointly coordinated
access points.
In this paper we propose AirSync, a novel scheme which provides not only time
but also phase synchronization, thus enabling distributed MIMO with full
spatial multiplexing gains. AirSync locks the phase of all access points using
a common reference broadcasted over the air in conjunction with a Kalman filter
which closely tracks the phase drift. We have implemented AirSync as a digital
circuit in the FPGA of the WARP radio platform. Our experimental testbed,
comprised of two access points and two clients, shows that AirSync is able to
achieve phase synchronization within a few degrees, and allows the system to
nearly achieve the theoretical optimal multiplexing gain. We also discuss MAC
and higher layer aspects of a practical deployment. To the best of our
knowledge, AirSync offers the first ever realization of the full multiuser MIMO
gain, namely the ability to increase the number of wireless clients linearly
with the number of jointly coordinated access points, without reducing the per
client rate.Comment: Submitted to Transactions on Networkin
On the MIMO Channel Capacity of Multi-Dimensional Signal Sets
In this contribution two general formulae were derived for the capacity evaluation of Multi-Input Multi-Output (MIMO) systems using multi-dimensional signal sets, different modulation schemes and an arbitrary number of transmit as well as receive antennas. It was shown that transmit diversity is capable of narrowing the gap between the capacity of the Rayleigh-fading channel and the AWGN channel. However, since this gap becomes narrower when the receiver diversity order is increased, for higher-order receiver diversity the performance advantage of transmit diversity diminishes. A MIMO system having full multiplexing gain has a higher achievable capacity, than the corresponding MIMO system designed for achieving full diversity gain, provided that the channel SNR is sufficiently high
Multipath Multiplexing for Capacity Enhancement in SIMO Wireless Systems
This paper proposes a novel and simple orthogonal faster than Nyquist (OFTN)
data transmission and detection approach for a single input multiple output
(SIMO) system. It is assumed that the signal having a bandwidth is
transmitted through a wireless channel with multipath components. Under
this assumption, the current paper provides a novel and simple OFTN
transmission and symbol-by-symbol detection approach that exploits the
multiplexing gain obtained by the multipath characteristic of wideband wireless
channels. It is shown that the proposed design can achieve a higher
transmission rate than the existing one (i.e., orthogonal frequency division
multiplexing (OFDM)). Furthermore, the achievable rate gap between the proposed
approach and that of the OFDM increases as the number of receiver antennas
increases for a fixed value of . This implies that the performance gain of
the proposed approach can be very significant for a large-scale multi-antenna
wireless system. The superiority of the proposed approach is shown
theoretically and confirmed via numerical simulations. {Specifically, we have
found {upper-bound average} rates of 15 bps/Hz and 28 bps/Hz with the OFDM and
proposed approaches, respectively, in a Rayleigh fading channel with 32 receive
antennas and signal to noise ratio (SNR) of 15.3 dB. The extension of the
proposed approach for different system setups and associated research problems
is also discussed.Comment: IEEE Transactions on Wireless Communication
Joint Hybrid Precoder and Combiner Design for mmWave Spatial Multiplexing Transmission
Millimeter-wave (mmWave) communications have been considered as a key
technology for future 5G wireless networks because of the orders-of-magnitude
wider bandwidth than current cellular bands. In this paper, we consider the
problem of codebook-based joint analog-digital hybrid precoder and combiner
design for spatial multiplexing transmission in a mmWave multiple-input
multiple-output (MIMO) system. We propose to jointly select analog precoder and
combiner pair for each data stream successively aiming at maximizing the
channel gain while suppressing the interference between different data streams.
After all analog precoder/combiner pairs have been determined, we can obtain
the effective baseband channel. Then, the digital precoder and combiner are
computed based on the obtained effective baseband channel to further mitigate
the interference and maximize the sum-rate. Simulation results demonstrate that
our proposed algorithm exhibits prominent advantages in combating interference
between different data streams and offer satisfactory performance improvement
compared to the existing codebook-based hybrid beamforming schemes
- …