QoS-compliant Data Aggregation for Smart Grids

International audienceThe Smart Grid (SG) aims to transform the current electric grid into a "smarter" network where the integration of renewable energy resources, energy efficiency and fault tolerance are the main benefits. A Wireless Sensor Network (WSN) controlling and exchanging messages across the grid is a promising solution because of its infrastructure free and ease of deployment characteristics. This comes at the cost of resource constrained and unstable links for such networks. The management of communication is then an issue: billions of messages with different sizes and priorities are sent across the network. Data aggregation is a potential solution to reduce loads on the communication links, thus achieving a better utilization of the wireless channel and reducing energy consumption. On the other hand, SG applications require different Quality of Service (QoS) priorities. Delays caused by data aggregation must then be controlled in order to achieve a proper communication. In this paper, we propose a work in progress, that consists of a QoS efficient data aggregation algorithm with two aggregation functions for the different traffics in a SG network. We expect to reduce the energy consumption while respecting the data delivery delays for the different SG applications

Spectrum Sharing, Latency, and Security in 5G Networks with Application to IoT and Smart Grid

The surge of mobile devices, such as smartphones, and tables, demands additional capacity. On the other hand, Internet-of-Things (IoT) and smart grid, which connects numerous sensors, devices, and machines require ubiquitous connectivity and data security. Additionally, some use cases, such as automated manufacturing process, automated transportation, and smart grid, require latency as low as 1 ms, and reliability as high as 99.99\%. To enhance throughput and support massive connectivity, sharing of the unlicensed spectrum (3.5 GHz, 5GHz, and mmWave) is a potential solution. On the other hand, to address the latency, drastic changes in the network architecture is required. The fifth generation (5G) cellular networks will embrace the spectrum sharing and network architecture modifications to address the throughput enhancement, massive connectivity, and low latency. To utilize the unlicensed spectrum, we propose a fixed duty cycle based coexistence of LTE and WiFi, in which the duty cycle of LTE transmission can be adjusted based on the amount of data. In the second approach, a multi-arm bandit learning based coexistence of LTE and WiFi has been developed. The duty cycle of transmission and downlink power are adapted through the exploration and exploitation. This approach improves the aggregated capacity by 33\%, along with cell edge and energy efficiency enhancement. We also investigate the performance of LTE and ZigBee coexistence using smart grid as a scenario. In case of low latency, we summarize the existing works into three domains in the context of 5G networks: core, radio and caching networks. Along with this, fundamental constraints for achieving low latency are identified followed by a general overview of exemplary 5G networks. Besides that, a loop-free, low latency and local-decision based routing protocol is derived in the context of smart grid. This approach ensures low latency and reliable data communication for stationary devices. To address data security in wireless communication, we introduce a geo-location based data encryption, along with node authentication by k-nearest neighbor algorithm. In the second approach, node authentication by the support vector machine, along with public-private key management, is proposed. Both approaches ensure data security without increasing the packet overhead compared to the existing approaches

Environment-Aware Minimum-Cost Wireless Backhaul Network Planning with Full-Duplex Links

In this work, we address the joint design of the wireless backhauling network topology as well as the frequency/power allocation on the wireless links, where nodes are capable of full-duplex (FD) operation. The proposed joint design enables the coexistence of multiple wireless links at the same channel, resulting in an enhanced spectral efficiency. Moreover, it enables the usage of FD capability when/where it is gainful. In this regard, a mixed-integer-linear-program (MILP) is proposed, aiming at a minimum cost design for the wireless backhaul network, considering the required rate demand at each base station. Moreover, a re-tunning algorithm is proposed which reacts to the slight changes in the network condition, e.g., channel attenuation or rate demand, by adjusting the transmit power at the wireless links. In this regard, a successive inner approximation (SIA)- based design is proposed, where in each step a convex subproblem is solved. Numerical simulations show a reduction in the overall network cost via the utilization of the proposed designs, thanks to the coexistence of multiple wireless links on the same channel due to the FD capability.Comment: Submuitted to IEEE for publicatio

Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Cross-layer design of multi-hop wireless networks

MULTI -hop wireless networks are usually defined as a collection of nodes equipped with radio transmitters, which not only have the capability to communicate each other in a multi-hop fashion, but also to route each others’ data packets. The distributed nature of such networks makes them suitable for a variety of applications where there are no assumed reliable central entities, or controllers, and may significantly improve the scalability issues of conventional single-hop wireless networks. This Ph.D. dissertation mainly investigates two aspects of the research issues related to the efficient multi-hop wireless networks design, namely: (a) network protocols and (b) network management, both in cross-layer design paradigms to ensure the notion of service quality, such as quality of service (QoS) in wireless mesh networks (WMNs) for backhaul applications and quality of information (QoI) in wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of this Ph.D. dissertation, different network settings are used as illustrative examples, however the proposed algorithms, methodologies, protocols, and models are not restricted in the considered networks, but rather have wide applicability. First, this dissertation proposes a cross-layer design framework integrating a distributed proportional-fair scheduler and a QoS routing algorithm, while using WMNs as an illustrative example. The proposed approach has significant performance gain compared with other network protocols. Second, this dissertation proposes a generic admission control methodology for any packet network, wired and wireless, by modeling the network as a black box, and using a generic mathematical 0. Abstract 3 function and Taylor expansion to capture the admission impact. Third, this dissertation further enhances the previous designs by proposing a negotiation process, to bridge the applications’ service quality demands and the resource management, while using WSNs as an illustrative example. This approach allows the negotiation among different service classes and WSN resource allocations to reach the optimal operational status. Finally, the guarantees of the service quality are extended to the environment of multiple, disconnected, mobile subnetworks, where the question of how to maintain communications using dynamically controlled, unmanned data ferries is investigated

A Heterogeneous Communications Network for Smart Grid by Using the Cost Functions

Smart Grids (SG) is an intelligent power grid in which the different SG node types with different communication requirements communicates different types of information with Control Stations (CS). Radio Access Technologies (RATs) due to its advantages are considered as the main access method to be used in order to have bidirectional data transferring between different node types and CS. Besides, spectrum is a rare source and its demand is increasing significantly. Elaborating a heterogeneous in order to fulfill different SG node types communication requirements effectively, is a challenging issue. To find a method to define desirability value of different RAT to support certain node types based on fitness degree between RAT communication characteristics and node type communication requirements is an appropriate solution. This method is implemented by using a comprehensive Cost Function (CF) including a communication CF (CCF) in combination with Energy CF (ECF). The Key Point Indicators which are used in the CCF are SG node type communication requirements. The existing trade of between Eb/N0 and spectral efficiency is considered as ECF. Based on the achieved CCF and ECF and their tradeoffs, SG node types are assigned to different RATs. The proposed assigning method is sensitive to the SG node types densities. The numerical results are achieved by using MATLAB simulation. The other different outcomes of the research output such as cognitive radio in SG and collectors effect number on data aggregation are discussed as well