Multipath and Rate Stability

Originally Published In Proc. IEEE Globecom Conference - CQRM: Communication QoS, Reliability & Modeling Symposiu

Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

A Survey on the Path Computation Element (PCE) Architecture

Quality of Service-enabled applications and services rely on Traffic Engineering-based (TE) Label Switched Paths (LSP) established in core networks and controlled by the GMPLS control plane. Path computation process is crucial to achieve the desired TE objective. Its actual effectiveness depends on a number of factors. Mechanisms utilized to update topology and TE information, as well as the latency between path computation and resource reservation, which is typically distributed, may affect path computation efficiency. Moreover, TE visibility is limited in many network scenarios, such as multi-layer, multi-domain and multi-carrier networks, and it may negatively impact resource utilization. The Internet Engineering Task Force (IETF) has promoted the Path Computation Element (PCE) architecture, proposing a dedicated network entity devoted to path computation process. The PCE represents a flexible instrument to overcome visibility and distributed provisioning inefficiencies. Communications between path computation clients (PCC) and PCEs, realized through the PCE Protocol (PCEP), also enable inter-PCE communications offering an attractive way to perform TE-based path computation among cooperating PCEs in multi-layer/domain scenarios, while preserving scalability and confidentiality. This survey presents the state-of-the-art on the PCE architecture for GMPLS-controlled networks carried out by research and standardization community. In this work, packet (i.e., MPLS-TE and MPLS-TP) and wavelength/spectrum (i.e., WSON and SSON) switching capabilities are the considered technological platforms, in which the PCE is shown to achieve a number of evident benefits

Auto-bandwidth control in dynamically reconfigured hybrid-SDN MPLS networks

The proposition of this work is based on the steady evolution of bandwidth demanding technology, which currently and more so in future, requires operators to use expensive infrastructure capability smartly to maximise its use in a very competitive environment. In this thesis, a traffic engineering control loop is proposed that dynamically adjusts the bandwidth and route of flows of Multi-Protocol Label Switching (MPLS) tunnels in response to changes in traffic demand. Available bandwidth is shifted to where the demand is, and where the demand requirement has dropped, unused allocated bandwidth is returned to the network. An MPLS network enhanced with Software-defined Networking (SDN) features is implemented. The technology known as hybrid SDN combines the programmability features of SDN with the robust MPLS label switched path features along with traffic engineering enhancements introduced by routing protocols such as Border Gateway Patrol-Traffic Engineering (BGP-TE) and Open Shortest Path First-Traffic Engineering (OSPF-TE). The implemented mixed-integer linear programming formulation using the minimisation of maximum link utilisation and minimum link cost objective functions, combined with the programmability of the hybrid SDN network allows for source to destination demand fluctuations. A key driver to this research is the programmability of the MPLS network, enhanced by the contributions that the SDN controller technology introduced. The centralised view of the network provides the network state information needed to drive the mathematical modelling of the network. The path computation element further enables control of the label switched path's bandwidths, which is adjusted based on current demand and optimisation method used. The hose model is used to specify a range of traffic conditions. The most important benefit of the hose model is the flexibility that is allowed in how the traffic matrix can change if the aggregate traffic demand does not exceed the hose maximum bandwidth specification. To this end, reserved hose bandwidth can now be released to the core network to service demands from other sites

Improving Network Performance Through Endpoint Diagnosis And Multipath Communications

Components of networks, and by extension the internet can fail. It is, therefore, important to find the points of failure and resolve existing issues as quickly as possible. Resolution, however, takes time and its important to maintain high quality of service (QoS) for existing clients while it is in progress. In this work, our goal is to provide clients with means of avoiding failures if/when possible to maintain high QoS while enabling them to assist in the diagnosis process to speed up the time to recovery. Fixing failures relies on first detecting that there is one and then identifying where it occurred so as to be able to remedy it. We take a two-step approach in our solution. First, we identify the entity (Client, Server, Network) responsible for the failure. Next, if a failure is identified as network related additional algorithms are triggered to detect the device responsible. To achieve the first step, we revisit the question: how much can you infer about a failure using TCP statistics collected at one of the endpoints in a connection? Using an agent that captures TCP statistics at one of the end points we devise a classification algorithm that identifies the root cause of failures. Using insights derived from this classification algorithm we identify dominant TCP metrics that indicate where/why problems occur. If/when a failure is identified as a network related problem, the second step is triggered, where the algorithm uses additional information that is collected from ``failed\u27\u27 connections to identify the device which resulted in the failure. Failures are also disruptive to user\u27s performance. Resolution may take time. Therefore, it is important to be able to shield clients from their effects as much as possible. One option for avoiding problems resulting from failures is to rely on multiple paths (they are unlikely to go bad at the same time). The use of multiple paths involves both selecting paths (routing) and using them effectively. The second part of this thesis explores the efficacy of multipath communication in such situations. It is expected that multi-path communications have monetary implications for the ISP\u27s and content providers. Our solution, therefore, aims to minimize such costs to the content providers while significantly improving user performance

Intelligent Network Infrastructures: New Functional Perspectives on Leveraging Future Internet Services

The Internet experience of the 21st century is by far very different from that of the early '80s. The Internet has adapted itself to become what it really is today, a very successful business platform of global scale. As every highly successful technology, the Internet has suffered from a natural process of ossification. Over the last 30 years, the technical solutions adopted to leverage emerging applications can be divided in two categories. First, the addition of new functionalities either patching existing protocols or adding new upper layers. Second, accommodating traffic grow with higher bandwidth links. Unfortunately, this approach is not suitable to provide the proper ground for a wide gamma of new applications. To be deployed, these future Internet applications require from the network layer advanced capabilities that the TCP/IP stack and its derived protocols can not provide by design in a robust, scalable fashion. NGNs (Next Generation Networks) on top of intelligent telecommunication infrastructures are being envisioned to support future Internet Services. This thesis contributes with three proposals to achieve this ambitious goal. The first proposal presents a preliminary architecture to allow NGNs to seamlessly request advanced services from layer 1 transport networks, such as QoS guaranteed point-to-multipoint circuits. This architecture is based on virtualization techniques applied to layer 1 networks, and hides from NGNs all complexities of interdomain provisioning. Moreover, the economic aspects involved were also considered, making the architecture attractive to carriers. The second contribution regards a framework to develop DiffServ-MPLS capable networks based exclusively on open source software and commodity PCs. The developed DiffServ-MPLS flexible software router was designed to allow NGN prototyping, that make use of pseudo virtual circuits and assured QoS as a starting point of development. The third proposal presents a state of the art routing and wavelength assignment algorithm for photonic networks. This algorithm considers physical layer impairments to 100% guarantee the requested QoS profile, even in case of single network failures. A number of novel techniques were applied to offer lower blocking probability when compared with recent proposed algorithms, without impacting on setup delay time

Architectural approaches to a science network software-defined exchange

To interconnect research facilities across wide geographic areas, network operators deploy science networks, also referred to as Research and Education (R&E) networks. These networks allow experimenters to establish dedicated circuits between research facilities for transferring large amounts of data, by using advanced reservation systems. Intercontinental dedicated circuits typically require coordination between multiple administrative domains, which need to reach an agreement on a suitable advance reservation. To enhance provisioning capabilities of multi-domain advance reservations, we propose an architecture for end-to-end service orchestration in multi-domain science networks that leverages software-defined networking (SDN) and software-defined exchanges (SDX) for providing multi-path, multi-domain advance reservations. Our simulations show our orchestration architecture increases the reservation success rate. We evaluate our solution using GridFTP, one of the most popular tools for data transfers in the scientific community. Additionally, we propose an interface that domain scientists can use to request science network services from our orchestration framework. Furthermore, we propose a federated auditing framework (FAS) that allows an SDX to verify whether the configurations requested by a user are correctly enforced by participating SDN domains, whether the configurations requested are correctly removed after their expiration time, and whether configurations exist that are performing non-requested actions. We also propose an architecture for advance reservation access control using SDN and tokens.Ph.D