1,194 research outputs found
Evolution of Test Programs Exploiting a FSM Processor Model
Microprocessor testing is becoming a challenging task, due to the increasing complexity of modern architectures. Nowadays, most architectures are tackled with a combination of scan chains and Software-Based Self-Test (SBST) methodologies. Among SBST techniques, evolutionary feedback-based ones prove effective in microprocessor testing: their main disadvantage, however, is the considerable time required to generate suitable test programs. A novel evolutionary-based approach, able to appreciably reduce the generation time, is presented. The proposed method exploits a high-level representation of the architecture under test and a dynamically built Finite State Machine (FSM) model to assess fault coverage without resorting to time-expensive simulations on low-level models. Experimental results, performed on an OpenRISC processor, show that the resulting test obtains a nearly complete fault coverage against the targeted fault mode
Functional Testing of Processor Cores in FPGA-Based Applications
Embedded processor cores, which are widely used in SRAM-based FPGA applications, are candidates for SEU (Single Event Upset)-induced faults and need to be tested occasionally during system exploitation. Verifying a processor core is a difficult task, due to its complexity and the lack of user knowledge about the core-implementation details. In user applications, processor cores are normally tested by executing some kind of functional test in which the individual processor's instructions are tested with a set of deterministic test patterns, and the results are then compared with the stored reference values. For practical reasons the number of test patterns and corresponding results is usually small, which inherently leads to low fault coverage. In this paper we develop a concept that combines the whole instruction-set test into a compact test sequence, which can then be repeated with different input test patterns. This improves the fault coverage considerably with no additional memory requirements
Self-Test Libraries Analysis for Pipelined Processors Transition Fault Coverage Improvement
Testing digital integrated circuits is generally done using Design-for-Testability (DfT) solutions. Such solutions, however, introduce non-negligible area and timing overheads that can be overcome by adopting functional solutions. In particular, functional test of integrated circuits plays a key role when guaranteeing the device's safety is required during the operative lifetime (in-field test), as required by standards like ISO26262. This can be achieved via the execution of a Self-Test Library (STL) by the device under test (DUT). Nevertheless, developing such test programs requires a significant manual effort, and can be non-trivial when dealing with complex modules. This paper moves the first step in defining a generic and systematic methodology to improve transition delay faults' observability of existing STLs. To do so, we analyze previously devised STLs in order to highlight specific points within test programs to be improved, leading to an increase in the final fault coverage
Effective techniques for automatically improving the transition delay fault coverage of Self-Test Libraries
International audienceIn-field test of integrated circuits using Self-Test Libraries (STLs) is a widely used technique specifically suited to guarantee the processor’s correct behavior during the operative lifetime, as mandated by functional safety standards such as ISO26262. Developing STLs for stuck-at faults requires significant manual efforts from test engineers, and targeting delay faults is even more challenging. In order to support this process, in this paper we propose a method to automate the creation of STLs targeting delay faults starting from existing STLs targeting stuck-at faults. The method is based first on identifying excited but not-observed transition delay faults and then adding suitable instructions able to detect them. Experimental results on a RISC-V processor show that the method can systematically detect a significant percentage of the target faults with reasonable computational effort and test code size increase
New Perspectives on Core In-field Path Delay Test
Path Delay fault test currently exploits DfT-based techniques, mainly relying on scan chains, widely supported by commercial tools. However, functional testing may be a desirable choice in this context because it allows to catch faults at-speed with no hardware overhead and it can be used both for endof-manufacturing tests and for in-field test. The purpose of this article is to compare the results that can be achieved with both approaches. This work is based on an open-source RISC-V-based processor core as benchmark device. Gathered results show that there is no correlation between stuck-at and path delay fault coverage, and provide guidelines for developing more effective functional test
New techniques for functional testing of microprocessor based systems
Electronic devices may be affected by failures, for example due to physical defects. These defects may be introduced during the manufacturing process, as well as during the normal operating life of the device due to aging. How to detect all these defects is not a trivial task, especially in complex systems such as processor cores. Nevertheless, safety-critical applications do not tolerate failures, this is the reason why testing such devices is needed so to guarantee a correct behavior at any time. Moreover, testing is a key parameter for assessing the quality of a manufactured product.
Consolidated testing techniques are based on special Design for Testability (DfT) features added in the original design to facilitate test effectiveness. Design, integration, and usage of the available DfT for testing purposes are fully supported by commercial EDA tools, hence approaches based on DfT are the standard solutions adopted by silicon vendors for testing their devices.
Tests exploiting the available DfT such as scan-chains manipulate the internal state of the system, differently to the normal functional mode, passing through unreachable configurations. Alternative solutions that do not violate such functional mode are defined as functional tests.
In microprocessor based systems, functional testing techniques include software-based self-test (SBST), i.e., a piece of software (referred to as test program) which is uploaded in the system available memory and executed, with the purpose of exciting a specific part of the system and observing the effects of possible defects affecting it. SBST has been widely-studies by the research community for years, but its adoption by the industry is quite recent.
My research activities have been mainly focused on the industrial perspective of SBST. The problem of providing an effective development flow and guidelines for integrating SBST in the available operating systems have been tackled and results have been provided on microprocessor based systems for the automotive domain. Remarkably, new algorithms have been also introduced with respect to state-of-the-art approaches, which can be systematically implemented to enrich SBST suites of test programs for modern microprocessor based systems. The proposed development flow and algorithms are being currently employed in real electronic control units for automotive products.
Moreover, a special hardware infrastructure purposely embedded in modern devices for interconnecting the numerous on-board instruments has been interest of my research as well. This solution is known as reconfigurable scan networks (RSNs) and its practical adoption is growing fast as new standards have been created. Test and diagnosis methodologies have been proposed targeting specific RSN features, aimed at checking whether the reconfigurability of such networks has not been corrupted by defects and, in this case, at identifying the defective elements of the network. The contribution of my work in this field has also been included in the first suite of public-domain benchmark networks
Innovative Techniques for Testing and Diagnosing SoCs
We rely upon the continued functioning of many electronic devices for our everyday welfare,
usually embedding integrated circuits that are becoming even cheaper and smaller
with improved features. Nowadays, microelectronics can integrate a working computer
with CPU, memories, and even GPUs on a single die, namely System-On-Chip (SoC).
SoCs are also employed on automotive safety-critical applications, but need to be tested
thoroughly to comply with reliability standards, in particular the ISO26262 functional
safety for road vehicles.
The goal of this PhD. thesis is to improve SoC reliability by proposing innovative
techniques for testing and diagnosing its internal modules: CPUs, memories, peripherals,
and GPUs. The proposed approaches in the sequence appearing in this thesis are described
as follows:
1. Embedded Memory Diagnosis: Memories are dense and complex circuits which
are susceptible to design and manufacturing errors. Hence, it is important to understand
the fault occurrence in the memory array. In practice, the logical and physical
array representation differs due to an optimized design which adds enhancements to
the device, namely scrambling. This part proposes an accurate memory diagnosis
by showing the efforts of a software tool able to analyze test results, unscramble
the memory array, map failing syndromes to cell locations, elaborate cumulative
analysis, and elaborate a final fault model hypothesis. Several SRAM memory failing
syndromes were analyzed as case studies gathered on an industrial automotive
32-bit SoC developed by STMicroelectronics. The tool displayed defects virtually,
and results were confirmed by real photos taken from a microscope.
2. Functional Test Pattern Generation: The key for a successful test is the pattern applied
to the device. They can be structural or functional; the former usually benefits
from embedded test modules targeting manufacturing errors and is only effective
before shipping the component to the client. The latter, on the other hand, can be
applied during mission minimally impacting on performance but is penalized due
to high generation time. However, functional test patterns may benefit for having
different goals in functional mission mode. Part III of this PhD thesis proposes
three different functional test pattern generation methods for CPU cores embedded
in SoCs, targeting different test purposes, described as follows:
a. Functional Stress Patterns: Are suitable for optimizing functional stress during
I
Operational-life Tests and Burn-in Screening for an optimal device reliability
characterization
b. Functional Power Hungry Patterns: Are suitable for determining functional
peak power for strictly limiting the power of structural patterns during manufacturing
tests, thus reducing premature device over-kill while delivering high test
coverage
c. Software-Based Self-Test Patterns: Combines the potentiality of structural patterns
with functional ones, allowing its execution periodically during mission.
In addition, an external hardware communicating with a devised SBST was proposed.
It helps increasing in 3% the fault coverage by testing critical Hardly
Functionally Testable Faults not covered by conventional SBST patterns.
An automatic functional test pattern generation exploiting an evolutionary algorithm
maximizing metrics related to stress, power, and fault coverage was employed
in the above-mentioned approaches to quickly generate the desired patterns. The
approaches were evaluated on two industrial cases developed by STMicroelectronics;
8051-based and a 32-bit Power Architecture SoCs. Results show that generation
time was reduced upto 75% in comparison to older methodologies while
increasing significantly the desired metrics.
3. Fault Injection in GPGPU: Fault injection mechanisms in semiconductor devices
are suitable for generating structural patterns, testing and activating mitigation techniques,
and validating robust hardware and software applications. GPGPUs are
known for fast parallel computation used in high performance computing and advanced
driver assistance where reliability is the key point. Moreover, GPGPU manufacturers
do not provide design description code due to content secrecy. Therefore,
commercial fault injectors using the GPGPU model is unfeasible, making radiation
tests the only resource available, but are costly. In the last part of this thesis, we
propose a software implemented fault injector able to inject bit-flip in memory elements
of a real GPGPU. It exploits a software debugger tool and combines the
C-CUDA grammar to wisely determine fault spots and apply bit-flip operations in
program variables. The goal is to validate robust parallel algorithms by studying
fault propagation or activating redundancy mechanisms they possibly embed. The
effectiveness of the tool was evaluated on two robust applications: redundant parallel
matrix multiplication and floating point Fast Fourier Transform
Test and Diagnosis of Integrated Circuits
The ever-increasing growth of the semiconductor market results in an increasing complexity of digital circuits. Smaller, faster, cheaper and low-power consumption are the main challenges in semiconductor industry. The reduction of transistor size and the latest packaging technology (i.e., System-On-a-Chip, System-In-Package, Trough Silicon Via 3D Integrated Circuits) allows the semiconductor industry to satisfy the latest challenges. Although producing such advanced circuits can benefit users, the manufacturing process is becoming finer and denser, making chips more prone to defects.The work presented in the HDR manuscript addresses the challenges of test and diagnosis of integrated circuits. It covers:- Power aware test;- Test of Low Power Devices;- Fault Diagnosis of digital circuits
A Flexible Framework for the Automatic Generation of SBST Programs
Software-based self-test (SBST) techniques are used to test processors and processor cores against permanent faults introduced by the manufacturing process or to perform in-field test in safety-critical applications. However, the generation of an SBST program is usually associated with high costs as it requires significant manual effort of a skilled engineer with in-depth knowledge about the processor under test. In this paper, we propose an approach for the automatic generation of SBST programs. First, we detail an automatic test pattern generation (ATPG) framework for the generation of functional test sequences. Second, we describe the extension of this framework with the concept of a validity checker module (VCM), which allows the specification of constraints with regard to the generated sequences. Third, we use the VCM to express typical constraints that exist when SBST is adopted for in-field test. In our experimental results, we evaluate the proposed approach with a microprocessor without interlocked pipeline stages (MIPS)-like microprocessor. The results show that the proposed method is the first approach able to automatically generate SBST programs for both end-of-manufacturing and in-field test whose fault efficiency is superior to those produced by state-of-the-art manual approaches
Post-silicon failing-test generation through evolutionary computation
The incessant progress in manufacturing technology is posing new challenges to microprocessor designers. Several activities that were originally supposed to be part of the pre-silicon design phase are migrating after tape-out, when the first silicon prototypes are available. The paper describes a post-silicon methodology for devising functional failing tests. Therefore, suited to be exploited by microprocessor producer to detect, analyze and debug speed paths during verification, speed-stepping, or other critical activities. The proposed methodology is based on an evolutionary algorithm and exploits a versatile toolkit named µGP. The paper describes how to take into account complex hardware characteristics and architectural details of such complex devices. The experimental evaluation clearly demonstrates the potential of this line of researc
- …