139 research outputs found

    IR-UWB for multiple-access with differential-detection receiver

    Get PDF
    Impulse-Radio Ultra-Wideband (IR-UWB) emerged as a new wireless technology because of its unique characteristics. Such characteristics are the ability to support rich-multimedia applications over short-ranges, the ability to share the available spectrum among multi-users, and the ability to design less complex transceivers for wireless communication systems functioning based on this technology. In this thesis a novel noncoherent IR-UWB receiver designed to support multiple-access is proposed. The transmitter of the proposed system employs the noncoherent bit-level differential phase-shift keying modulation combined with direct-sequence code division multiple-access. The system is investigated under the effect of the additive white Gaussian noise with multiple-access channel. The receiver implements bit-level differential-detection to recover information bits. Closed-form expression for the average probability of error in the proposed receiver while considering the channel effects is analytically derived. This receiver is compared against another existing coherent receiver in terms of bit error rate performance to confirm its practicality. The proposed receiver is characterized by its simple design requirements and its multiple-access efficiency

    On multi-user EXIT chart analysis aided turbo-detected MBER beamforming designs

    No full text
    Abstract—This paper studies the mutual information transfer characteristics of a novel iterative soft interference cancellation (SIC) aided beamforming receiver communicating over both additive white Gaussian noise (AWGN) and multipath slow fading channels. Based on the extrinsic information transfer (EXIT) chart technique, we investigate the convergence behavior of an iterative minimum bit error rate (MBER) multiuser detection (MUD) scheme as a function of both the system parameters and channel conditions in comparison to the SIC aided minimum mean square error (SIC-MMSE) MUD. Our simulation results show that the EXIT chart analysis is sufficiently accurate for the MBER MUD. Quantitatively, a two-antenna system was capable of supporting up to K=6 users at Eb/N0=3dB, even when their angular separation was relatively low, potentially below 20?. Index Terms—Minimum bit error rate, beamforming, multiuser detection, soft interference cancellation, iterative processing, EXIT chart

    Multilevel Coding and Unequal Error Protection for Multiple-Access Communications and Ultra-Wideband Communications in the Presence of Interference.

    Full text link
    Interference is one of the major factors that degrade the performance of a communication system. Various types of interference cause di Kerent impact on the system performance. In this thesis, we consider interference management at the physical layer. In order to enhance the performance, the receiver needs to have the knowledge about the interference. By exploiting the knowledge about interference, such as statistical properties, it can be suppressed to enhance the link quality. This thesis contains two main topics: multilevel coding (MLC) for unequal error protection (UEP) and receiver design for ultra-wideband (UWB) communications to suppress interference. Both topics deal with interference in di Kerent ways, and face di Kerent design challenges. MLC is a way to provide UEP for different streams of information with different levels of importance in a communication system. It combines coding and modulation schemes to optimize the system performance. The idea is to protect each bit in the modulation constellation point by an individual binary code. We designed and analyzed a DS-CDMA system with asymmetric PSK modulation and MLC using BCH codes in an AWGN channel. The analysis includes probability of bit error of the system, and the capacity and throughput of the MLC scheme combined with 8-PSK modulation. The results show that the MLC scheme can have a higher throughput than the regular coding scheme in the low SNR region in the AWGN channel. We also analyzed the performance of UWB communications in the presence of MAI and jamming interference. We considered a nonlinear interference suppression technique for impulse radio based UWB systems in the AWGN channel. The technique is based on the locally optimum Bayes detection (LOBD) algorithm, which utilizes the interference probability density function (PDF) for receiver design. This type of receiver has low complexity, and numerical results show that its performance asymptotically approaches that of the optimum receiver. Lastly, we discussed the implementation of the proposed receiver by adaptively monitor and update the interference PDF. The adaptive LOBD algorithm makes the proposed receiver implementation practical to deal with different types of interference.Ph.D.Electrical Engineering: SystemsUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/75955/1/wangcw_1.pd

    An Efficient Finger Allocation Method for the Maximum Likelihood RAKE Receiver

    Get PDF
    In wideband wireless communication systems the RAKE receiver is commonly used to collect the resolvable multipath energy and counter the effects of fading through diversity. However, in channels with large delay and energy spread, its high complexity still remains a major issue. This motivates the study and application of computationally efficient finger placement algorithms that significantly reduce the receiver complexity with a reasonable performance loss. In this paper, a low–complexity maximum likelihood RAKE receiver, the Suboptimum – Maximum Power Minimum Correlation (S–MPMC) RAKE is proposed. The allocation of its first two fingers is based on the received signal correlation properties. Their positions determine also the placement of the rest of the fingers. Simulation results are provided to show the operation of the receiver and demonstrate its performance. Comparisons with relevant methods are performed to corroborate the merits of the proposal. The balance on the performance and the complexity of the technique makes it suitable for use in commercial wideband communication systems

    Implementable Wireless Access for B3G Networks - III: Complexity Reducing Transceiver Structures

    No full text
    This article presents a comprehensive overview of some of the research conducted within Mobile VCE’s Core Wireless Access Research Programme,1 a key focus of which has naturally been on MIMO transceivers. The series of articles offers a coherent view of how the work was structured and comprises a compilation of material that has been presented in detail elsewhere (see references within the article). In this article MIMO channel measurements, analysis, and modeling, which were presented previously in the first article in this series of four, are utilized to develop compact and distributed antenna arrays. Parallel activities led to research into low-complexity MIMO single-user spacetime coding techniques, as well as SISO and MIMO multi-user CDMA-based transceivers for B3G systems. As well as feeding into the industry’s in-house research program, significant extensions of this work are now in hand, within Mobile VCE’s own core activity, aiming toward securing major improvements in delivery efficiency in future wireless systems through crosslayer operation

    Iterative Soft Interference Cancellation Aided Minimum Bit Error Rate Uplink Receiver Beamforming

    No full text
    Iterative multiuser receivers constitute an effective solution for transmission over Multiple Access Interference (MAI) infested channels, when invoking a combined multiuser detector and channel decoder. Most reduced-complexity methods in this area use the Complex-valued Minimum Mean Squared Error (CMMSE) Multiuser Detector (MUD). Since the desired output of BPSK systems is real-valued, minimizing the Mean Square Error (MSE) between the beamformer’s desired output and the real part of the beamformer output has the potential of significantly improving the attainable Bit Error Rate (BER) performance. We refer to this MMSE design as the Real-valued MMSE (RMMSE) receiver. In this paper, we explore a new Soft-Input Soft-Output (SISO) interference cancellation multiuser detection algorithm based on the novel Minimum BER (MBER) criterion. We demonstrate that the MBER turbo receiver outperforms both the CMMSE and the RMMSE algorithms, particularly in so-called ‘overloaded’ beamforming systems, where the number of receiver antennas is lower than the number of users supported

    Adaptive receivers for direct-spread and multi-carrier code division multiple access systems

    Get PDF
    In this thesis, the detection of Direct Sequence Code Division Multiple Access (DS-CDMA) signals in an AWGN channel and Multi-Carrier (MC) CDMA signals in a time-dispersion channel is discussed. The DS-CDMA receiver employs an adaptive multiuser interference canceler that utilizes deadzone limiters in the tentative decision stage. With weights adjusted adaptively, the prior knowledge of signal powers is unnecessary. The steady state error performance of this receiver is obtained and found to be superior to the performance of the same receiver using hard limiters for tentative decisions. The channel is considered non-fading in. this receiver. Modeling the frequency selective channel lading as narrowband fiat-flat fading centered at each subcarrier, the MC-CDMA technique reduces the effect of channel dispersion. A decorrelating multiuser interference canceler is introduced in the MC-CDMA receiver to reduce the multi-access interference, especially when the orthogonality of signature codes is degraded by the fading channel

    Spatial processing for frequency diversity schemes

    Get PDF
    A novel technique to obtain optimum blind spatial processing for frequency diversity spread spectrum (FDSS) communication systems is introduced. The sufficient statistics for a linear combiner, which prove ineffective due to the interferers frequency characteristics, are modified to yield improved detection under partial jamming in the spectral domain. Robustness to partial time jamming is achieved by extending the notion of replicas over the frequency axis to a repetition over the time variable. Analysis and simulations are provided, showing the advantages of using FDSS with spatial diversity to combat the interference when it is confined to a narrow frequency band or short time interval relative to the desired signal extent in either domain.Peer Reviewe
    • 

    corecore