7,060 research outputs found
On sensor fusion for airborne wind energy systems
A study on filtering aspects of airborne wind energy generators is presented.
This class of renewable energy systems aims to convert the aerodynamic forces
generated by tethered wings, flying in closed paths transverse to the wind
flow, into electricity. The accurate reconstruction of the wing's position,
velocity and heading is of fundamental importance for the automatic control of
these kinds of systems. The difficulty of the estimation problem arises from
the nonlinear dynamics, wide speed range, large accelerations and fast changes
of direction that the wing experiences during operation. It is shown that the
overall nonlinear system has a specific structure allowing its partitioning
into sub-systems, hence leading to a series of simpler filtering problems.
Different sensor setups are then considered, and the related sensor fusion
algorithms are presented. The results of experimental tests carried out with a
small-scale prototype and wings of different sizes are discussed. The designed
filtering algorithms rely purely on kinematic laws, hence they are independent
from features like wing area, aerodynamic efficiency, mass, etc. Therefore, the
presented results are representative also of systems with larger size and
different wing design, different number of tethers and/or rigid wings.Comment: This manuscript is a preprint of a paper accepted for publication on
the IEEE Transactions on Control Systems Technology and is subject to IEEE
Copyright. The copy of record is available at IEEEXplore library:
http://ieeexplore.ieee.org
State Estimation for Kite Power Systems with Delayed Sensor Measurements
We present a novel estimation approach for airborne wind energy systems with ground-based control and energy generation. The estimator fuses measurements from an inertial measurement unit attached to a tethered wing and position measurements from a camera as well as line angle sensors in an unscented Kalman filter. We have developed a novel kinematic description for tethered wings to specifically address tether dynamics. The presented approach simultaneously estimates feedback variables for a flight controller as well as model parameters, such as a time-varying delay. We demonstrate the performance of the estimator for experimental flight data and compare it to a state-of-the-art estimator based on inertial measurements
Visual motion tracking and sensor fusion for kite power systems
An estimation approach is presented for kite power systems with groundbased actuation and generation. Line-based estimation of the kite state, including position and heading, limits the achievable cycle efficiency of such airborne wind energy systems due to significant estimation delay and line sag. We propose a filtering scheme to fuse onboard inertial measurements with ground-based line data for ground-based systems in pumping operation. Estimates are computed using an extended Kalman filtering scheme with a sensor-driven kinematic process model which propagates and corrects for inertial sensor biases. We further propose a visual motion tracking approach to extract estimates of the kite position from ground-based video streams. The approach combines accurate object detection with fast motion tracking to ensure long-term object tracking in real time. We present experimental results of the visual motion tracking and inertial sensor fusion on a ground-based kite power system in pumping operation and compare both methods to an existing estimation scheme based on line measurements
A teleoperated unmanned rotorcraft flight test technique
NASA and the U.S. Army are jointly developing a teleoperated unmanned rotorcraft research platform at the National Aeronautics and Space Administration (NASA) Langley Research Center. This effort is intended to provide the rotorcraft research community an intermediate step between wind tunnel rotorcraft studies and full scale flight testing. The research vehicle is scaled such that it can be operated in the NASA Langley 14- by 22-Foot Subsonic Tunnel or be flown freely at an outside test range. This paper briefly describes the system's requirements and the techniques used to marry the various technologies present in the system to meet these requirements. The paper also discusses the status of the development effort
Automatic Fire Detection: A Survey from Wireless Sensor Network Perspective
Automatic fire detection is important for early detection and promptly extinguishing fire. There are ample studies investigating the best sensor combinations and appropriate techniques for early fire detection. In the previous studies fire detection has either been considered as an application of a certain field (e.g., event detection for wireless sensor networks) or the main concern for which techniques have been specifically designed (e.g., fire detection using remote sensing techniques). These different approaches stem from different backgrounds of researchers dealing with fire, such as computer science, geography and earth observation, and fire safety. In this report we survey previous studies from three perspectives: (1) fire detection techniques for residential areas, (2) fire detection techniques for forests, and (3) contributions of sensor networks to early fire detection
Automatic Retraction and Full Cycle Operation for a Class of Airborne Wind Energy Generators
Airborne wind energy systems aim to harvest the power of winds blowing at
altitudes higher than what conventional wind turbines reach. They employ a
tethered flying structure, usually a wing, and exploit the aerodynamic lift to
produce electrical power. In the case of ground-based systems, where the
traction force on the tether is used to drive a generator on the ground, a two
phase power cycle is carried out: one phase to produce power, where the tether
is reeled out under high traction force, and a second phase where the tether is
recoiled under minimal load. The problem of controlling a tethered wing in this
second phase, the retraction phase, is addressed here, by proposing two
possible control strategies. Theoretical analyses, numerical simulations, and
experimental results are presented to show the performance of the two
approaches. Finally, the experimental results of complete autonomous power
generation cycles are reported and compared with first-principle models.Comment: This manuscript is a preprint of a paper submitted for possible
publication on the IEEE Transactions on Control Systems Technology and is
subject to IEEE Copyright. If accepted, the copy of record will be available
at IEEEXplore library: http://ieeexplore.ieee.or
The grape remote sensing atmospheric profile and evapotranspiration experiment
Particularly in light of California’s recent multiyear drought, there is a critical need for accurate and timely evapotranspiration (ET) and crop stress information to ensure long-term sustainability of high-value crops. Providing this information requires the development of tools applicable across the continuum from subfield scales to improve water management within individual fields up to watershed and regional scales to assess water resources at county and state levels. High-value perennial crops (vineyards and orchards) are major water users, and growers will need better tools to improve water-use efficiency to remain economically viable and sustainable during periods of prolonged drought. To develop these tools, government, university, and industry partners are evaluating a multiscale remote sensing–based modeling system for application over vineyards. During the 2013–17 growing seasons, the Grape Remote Sensing Atmospheric Profile and Evapotranspiration eXperiment (GRAPEX) project has collected micrometeorological and biophysical data within adjacent pinot noir vineyards in the Central Valley of California. Additionally, each year ground, airborne, and satellite remote sensing data were collected during intensive observation periods (IOPs) representing different vine phenological stages. An overview of the measurements and some initial results regarding the impact of vine canopy architecture on modeling ET and plant stress are presented here. Refinements to the ET modeling system based on GRAPEX are being implemented initially at the field scale for validation and then will be integrated into the regional modeling toolkit for large area assessment.info:eu-repo/semantics/publishedVersio
- …