On pinpoint capture power management in at-speed scan test generation

This paper proposes a novel scheme to manage capture power in a pinpoint manner for achieving guaranteed capture power safety, improved small-delay test capability, and minimal test cost impact in at-speed scan test generation. First, switching activity around each long path sensitized by a test vector is checked to characterize it as hot (with excessively-high switching activity), warm (with normal/functional switching activity), or cold (with excessively-low switching activity). Then, X-restoration/X-filling-based rescue is conducted on the test vector to reduce switching activity around hot paths. If the rescue is insufficient to turn a hot path into a warm path, mask is then conducted on expected test response data to instruct the tester to ignore the potentially-false test response value from the hot path, thus achieving guaranteed capture power safety. Finally, X-restoration/X-filling-based warm-up is conducted on the test vector to increase switching activity around cold paths for improving their small-delay test capability. This novel approach of pinpoint capture power management has significant advantages over the conventional approach of global capture power management, as demonstrated by evaluation results on large ITC\u2799 benchmark circuits and detailed path delay analysis.2012 IEEE International Test Conference, 5-8 November 2012, Anaheim, CA, US

A Total Self Checking Comparator Implementable on FPGAS Using Bist Technology

an integrated circuits (IC) "manufacturing tests" may be made easier to administer with the use of design for testability (DFT). Integrated circuits' embedded memory tests make use of the TSC (TSC) approach. We have shown the TSC method and several algorithms used in TSC for the purpose of testing embedded memory in this article. An address generator, controller, comparator, and memory are the four main components of this kind of memory TSC technology. This paper details the three memory TSC controller implementation techniques. The memory TSC controller is modelled in Verilog HDL, and its accuracy is checked using the RTL compiler before synthesis. Here we provide a way to build TSC comparators for TSC systems that may be implemented on FPGAs—totally self-checking (TSC) systems—that can be used online. By directly measuring the output of each lookup table (LUT), this approach may be utilised to do comprehensive online diagnostics of all LUTs. This entails mapping the basic components of the comparator with a limited number of test patterns. With our technique, we can achieve exhaustive diagnosis with a small number of test patterns on the order of n [O(n)] (where n is the input number to the comparator) while yet covering all bases 100% of the time, even if we are just aware of the LUT's specs and not its exact structure. For systems that need absolute reliability, FPGAs will be a perfect fit. Our experiment also included a single-event upset (SEU) induced by neutron radiation to validate the soft error rate (SER) in a field-programmable gate array (FPGA) based on static random-access memory (SRAM)

A Flexible Power Control Method for Right Power Testing of Scan-Based Logic BIST

High power dissipation during scan-based logic BIST is a crucial problem that leads to over-testing. Although controlling test power of a circuit under test (CUT) to an appropriate level is strongly required, it is not easy to control test power in BIST. This paper proposes a novel power controlling method to control the toggle rate of the patterns to an arbitrary level by modifying pseudo random patterns generated by a TPG (Test Pattern Generator) of logic BIST. While many approaches have been proposed to control the toggle rate of the patterns, the proposed approach can provide higher fault coverage. Experimental results show that the proposed approach can control toggle rates to a predetermined target level and modified patterns can achieve high fault coverage without increasing test time.2016 IEEE 25th Asian Test Symposium (ATS), 21-24 Nov. 2016, Hiroshima, Japa

Scalable Approach for Power Droop Reduction During Scan-Based Logic BIST

The generation of significant power droop (PD) during at-speed test performed by Logic Built-In Self Test (LBIST) is a serious concern for modern ICs. In fact, the PD originated during test may delay signal transitions of the circuit under test (CUT): an effect that may be erroneously recognized as delay faults, with consequent erroneous generation of test fails and increase in yield loss. In this paper, we propose a novel scalable approach to reduce the PD during at-speed test of sequential circuits with scan-based LBIST using the launch-on-capture scheme. This is achieved by reducing the activity factor of the CUT, by proper modification of the test vectors generated by the LBIST of sequential ICs. Our scalable solution allows us to reduce PD to a value similar to that occurring during the CUT in field operation, without increasing the number of test vectors required to achieve a target fault coverage (FC). We present a hardware implementation of our approach that requires limited area overhead. Finally, we show that, compared with recent alternative solutions providing a similar PD reduction, our approach enables a significant reduction of the number of test vectors (by more than 50%), thus the test time, to achieve a target FC

A survey of scan-capture power reduction techniques

With the advent of sub-nanometer geometries, integrated circuits (ICs) are required to be checked for newer defects. While scan-based architectures help detect these defects using newer fault models, test data inflation happens, increasing test time and test cost. An automatic test pattern generator (ATPG) exercise’s multiple fault sites simultaneously to reduce test data which causes elevated switching activity during the capture cycle. The switching activity results in an IR drop exceeding the devices under test (DUT) specification. An increase in IR-drop leads to failure of the patterns and may cause good DUTs to fail the test. The problem is severe during at-speed scan testing, which uses a functional rated clock with a high frequency for the capture operation. Researchers have proposed several techniques to reduce capture power. They used various methods, including the reduction of switching activity. This paper reviews the recently proposed techniques. The principle, algorithm, and architecture used in them are discussed, along with key advantages and limitations. In addition, it provides a classification of the techniques based on the method used and its application. The goal is to present a survey of the techniques and prepare a platform for future development in capture power reduction during scan testing

Logic/Clock-Path-Aware At-Speed Scan Test Generation for Avoiding False Capture Failures and Reducing Clock Stretch

IR-drop induced by launch switching activity (LSA) in capture mode during at-speed scan testing increases delay along not only logic paths (LPs) but also clock paths (Cps). Excessive extra delay along LPs compromises test yields due to false capture failures, while excessive extra delay along CPs compromises test quality due to test clock stretch. This paper is the first to mitigate the impact of LSA on both LPs and CPs with a novel LCPA (Logic/Clock Path-Aware) at-speed scan test generation scheme, featuring (1) a new metric for assessing the risk of false capture failures based on the amount of LSA around both LPs and CPs, (2) a procedure for avoiding false capture failures by reducing LSA around LPs or masking uncertain test responses, and (3) a procedure for reducing test clock stretch by reducing LSA around CPs. Experimental results demonstrate the effectiveness of the LCPA scheme in improving test yields and test quality.2015 IEEE 24th Asian Test Symposium (ATS), 22-25 November 2015, Mumbai, Indi

On Achieving Capture Power Safety in At-Speed Scan-Based Logic BIST

The applicability of at-speed scan-based logic built-in self-test (BIST) is being severely challenged by excessive capture power that may cause erroneous test responses for good chips. Different from conventional low-power BIST, this paper is the first that has explicitly focused on achieving capture power safety with a practical scheme called capture-power-safe BIST (CPS-BIST). The basic idea is to identify all possibly erroneous test responses and use the well-known technique of mask (partial-mask or full-mask) to block them from reaching the MISR. Experiments with large benchmark and industrial circuits show that CPS-BIST can achieve capture power safety with negligible impact on both test quality and area overhead.2013 22nd Asian Test Symposium, 18-21 November 2013, Jiaosi Township, Taiwa

On Pinpoint Capture Power Management in At-Speed Scan Test Generation

This paper proposes a novel scheme to manage capture power in a pinpoint manner for achieving guaranteed capture power safety, improved small-delay test capability, and minimal test cost impact in at-speed scan test generation. First, switching activity around each long path sensitized by a test vector is checked to characterize it as hot (with excessively-high switching activity), warm (with normal/functional switching activity), or cold (with excessively-low switching activity). Then, X-restoration/X-filling-based rescue is conducted on the test vector to reduce switching activity around hot paths. If the rescue is insufficient to turn a hot path into a warm path, mask is then conducted on expected test response data to instruct the tester to ignore the potentially-false test response value from the hot path, thus achieving guaranteed capture power safety. Finally, X-restoration/X-filling-based warm-up is conducted on the test vector to increase switching activity around cold paths for improving their small-delay test capability. This novel approach of pinpoint capture power management has significant advantages over the conventional approach of global capture power management, as demonstrated by evaluation results on large ITC'99 benchmark circuits and detailed path delay analysis.2012 IEEE International Test Conference, 5-8 November 2012, Anaheim, CA, US