MIMO signal processing in offset-QAM based filter bank multicarrier systems

Next-generation communication systems have to comply with very strict requirements for increased flexibility in heterogeneous environments, high spectral efficiency, and agility of carrier aggregation. This fact motivates research in advanced multicarrier modulation (MCM) schemes, such as filter bank-based multicarrier (FBMC) modulation. This paper focuses on the offset quadrature amplitude modulation (OQAM)-based FBMC variant, known as FBMC/OQAM, which presents outstanding spectral efficiency and confinement in a number of channels and applications. Its special nature, however, generates a number of new signal processing challenges that are not present in other MCM schemes, notably, in orthogonal-frequency-division multiplexing (OFDM). In multiple-input multiple-output (MIMO) architectures, which are expected to play a primary role in future communication systems, these challenges are intensified, creating new interesting research problems and calling for new ideas and methods that are adapted to the particularities of the MIMO-FBMC/OQAM system. The goal of this paper is to focus on these signal processing problems and provide a concise yet comprehensive overview of the recent advances in this area. Open problems and associated directions for future research are also discussed.Peer ReviewedPostprint (author's final draft

Downlink scheduling and resource allocation for 5G MIMO-multicarrier: OFDM vs FBMC/OQAM

OAPA The definition of the next generation of wireless communications, so-called 5G networks, is currently underway. Among many technical decisions, one that is particularly fundamental is the choice of the physical layer modulation format and waveform, an issue for which several alternatives have been proposed. Two of the most promising candidates are: (i) orthogonal frequency division multiple (OFDM), a conservative proposal that builds upon the huge legacy of 4G networks, and (ii) filterbank multicarrier/offset quadrature amplitude modulation (FBMC/OQAM), a progressive approach that in frequency selective channels sacrifices subcarrier orthogonality in lieu of an increased spectral efficiency. The comparative merits of OFDM and FBMC/OQAM have been well investigated over the last few years but mostly, from a purely physical layer point of view and largely neglecting how the physical layer performance translates into user-relevant metrics at the upper-layers. This paper aims at presenting a comprehensive comparison of both modulation formats in terms of practical network indicators such as goodput, delay, fairness and service coverage, and under operational conditions that can be envisaged to be realistic in 5G deployments. To this end, a unifying cross-layer framework is proposed that encompasses the downlink scheduling and resource allocation procedures and that builds upon a model of the queueing process at the data-link control layer and a physical layer abstraction that can be chosen to model either OFDM or FBMC/OQAM. Extensive numerical results conclusively demonstrate that most of the apriori advantages of FBMC/OQAM over OFDM do indeed translate into improved network indicators, that is, the increase in spectral efficiency achieved by FBMC/OQAM makes up for the distortion caused by the loss of orthogonality.Peer ReviewedPostprint (published version

Single- versus Multi-Carrier Terahertz-Band Communications: A Comparative Study

The prospects of utilizing single-carrier (SC) and multi-carrier (MC) waveforms in future terahertz (THz)-band communication systems remain unresolved. On the one hand, the limited multi-path components at high frequencies result in frequency-flat channels that favor low-complexity wideband SC systems. On the other hand, frequency-dependent molecular absorption and transceiver characteristics and the existence of multi-path components in indoor sub-THz systems can still result in frequency-selective channels, favoring off-the-shelf MC schemes such as orthogonal frequency-division multiplexing (OFDM). Variations of SC/MC designs result in different THz spectrum utilization, but spectral efficiency is not the primary concern with substantial available bandwidths; baseband complexity, power efficiency, and hardware impairment constraints are predominant. This paper presents a comprehensive study of SC/MC modulations for THz communications, utilizing an accurate wideband THz channel model and highlighting the various performance and complexity trade-offs of the candidate schemes. Simulations demonstrate that discrete-Fourier-transform spread orthogonal time-frequency space (DFT-s-OTFS) achieves a lower peak-to-average power ratio (PAPR) than OFDM and OTFS and enhances immunity to THz impairments and Doppler spreads, but at an increased complexity cost. Moreover, DFT-s-OFDM is a promising candidate that increases robustness to THz impairments and phase noise (PHN) at a low PAPR and overall complexity.Comment: 18 pages, 12 figures, journa

Evaluation of 5G Modulation Candidates WCP-COQAM, GFDM-OQAM, and FBMC-OQAM in Low-Band Highly Dispersive Wireless Channels

We analyse some of the candidates for modulations for 5G: FBMC-OQAM, GFDM-OQAM, and WCP-COQAM. Unlike most of the related bibliographies, which are oriented to mobile communications, our research is focused on 5G in cognitive radio based industrial wireless communications. According to the ultrareliability and low-latency requirements of industrial communications, we simulate the aforementioned modulations in low-band transmissions (carrier frequencies below 6GHz and a bandwidth narrower than 100MHz) through large indoor spaces and severe multipath channels that emulate industrial halls. Moreover, we give detailed information aboutWCP-COQAMand how the windowing affects the protection againstmultipath effect and reduces spectral efficiency compared to GFDM-OQAM.We also compare the aforementioned filtered multicarrier techniques and OFDM in terms of robustness against multipath channels, power spectral density, and spectral efficiency. Based on these results, we aim at providing an approximate idea about the suitability of 5G MCM candidates for industrial wireless communications based on CR

Design and Performance Analysis of the Dynamic Reduction of Intrinsic Interference Suppression and BER using QAM-based FBMC for MU-MIMO Communications

The present research work is focused on the study of co-channel interface with its minimization techniques without influencing its performance, in turn, which is desired to achieve the minimized complexity of Quadrature Amplitude Modulation (QAM)-based Filter Bank Multi-Carrier (FBMC) to minimize the interference and increase the spectral features with consideration of intrinsic features extractions for the ML (Maximum Likelihood) synthesis systems. The valid measures are given various concerns under consideration, to start with the consideration of the evaluation of the Cyclic Prefix Orthogonal Frequency Division Multiplexing (CP-OFD performance metrics along with the FBMC/QAM in signal transmission in a dedicated fading channel for the evaluation of the modulation order and BER as a required trade-off for quality assessments. From the results, it can be noted that the proposed FBMC QAM has performed better when compared with conventional FBMC systems. The present research also includes considering and calculating the efficiency of nonlinear channels with the Multi-User Multiple Input Multiple Output (MU-MIMO) and FBMC/QAM techniques. In continuation, the obtained results are dominating significantly to access the possible solution to meet the efficiency of the proposed system. In the next part of the research, it is considered with implementation of the sub-detector during the downlink of the system with the technique of threshold-driven strategy for better accuracy and minimization of the complexity in terms of ML detection in terms of order of its modulation. The calculations of the proposed technique with better BER are done on the recent MATLAB platform with its simulation demonstration for its detailed observation

MULTICARRIER TRANSMISSION TECHNIQUES

In this thesis, multicarrier transmission techniques envisioned for the fifth-generation wireless networks are studied. First, three basic techniques, namely orthogonal frequency-division multiplexing (OFDM), filter-bank multicarrier offset quadrature amplitude modulation (FBMC-OQAM), and generalized frequency-division multiplexing (GFDM) are reviewed in detail. In particular, the block-based structure and cyclic prefixing of OFDM are discussed and its bit error rate (BER) performance is analyzed. Then it is demonstrated that with offset QAM the orthogonality between subcarriers in FBMC-OQAM is preserved. Next, the roles of tail biting technique and circular convolution in GFDM are explained. An efficient implementation of GFDM is also described. Second, circular filterbank multicarrier offset QAM (CFBMC-OQAM), a technique which combines the block-based structure of GFDM and offset QAM of FBMC-OQAM, is presented. Then a precoded scheme is proposed, in which the Walsh-Hadamard (WH) transform is applied to CFBMC-OQAM system, resulting in a precoded scheme called WH-CFBMC-OQAM. The proposed system has a block-based structure and can be implemented efficiently using fast Fourier transform (FTT) and inverse FFT (IFFT). In addition, a cyclic prefix can be inserted to facilitate simple equalization at the receiver. WH-CFBMC-OQAM exploits the frequency diversity by averaging the signal-to-noise ratios (SNRs) over all subcarriers. A theoretical approximation for the bit error rate performance of WH-CFBMC-OQAM over a frequency-selective channel is derived. Under the same system configuration, simulation results demonstrate the excellent performance of the proposed scheme when compared to the performance of other techniques. Simulation also verifies that the theoretical results match perfectly with simulation results for any SNR value