On The Stability Of The Flow And Heat Transfer Over A Moving Thin Needle With Prescribed Surface Heat Flux

The steady flow and heat transfer over a moving thin needle with prescribed surface heat flux is studied. The similarity equations are obtained by using similarity transformation technique. The problem is solved numerically using the boundary value problem solver (bvp4c) in Matlab software. The plots of the skin friction coefficient and the local Nusselt number as well as the velocity and temperature profiles are presented and their behaviors are discussed for different values of the needle size and the velocity ratio parameter. Results show that the decreasing of the needle size enhance the skin friction coefficient and the local Nusselt number on the needle surface. It is found that dual solutions exist (upper and lower branches) for a certain range of the velocity ratio parameter. A stability analysis of the solutions are performed and it shows that the upper branch solution is stable, while the lower branch solution is unstable

Hybrid Nanofluid Flow Towards A Stagnation Point On A Stretching/Shrinking Cylinder

This paper examines the stagnation point flow towards a stretching/shrinking cylinder in a hybrid nanofluid. Here, copper (Cu) and alumina (Al2O3) are considered as the hybrid nanoparticles while water as the base fluid. The governing equations are reduced to the similarity equations using a similarity transformation. The resulting equations are solved numerically using the boundary value problem solver, bvp4c, available in the Matlab software. It is found that the heat transfer rate is greater for the hybrid nanofluid compared to the regular nanofluid as well as the regular fluid. Besides, the non-uniqueness of the solutions is observed for certain physical parameters. It is also noticed that the bifurcation of the solutions occurs in the shrinking regions. In addition, the heat transfer rate and the skin friction coefficients increase in the presence of nanoparticles and for larger Reynolds number. It is found that between the two solutions, only one of them is stable as time evolves

Hybrid Nanofluid Flow Past A Permeable Moving Thin Needle

The problem of a steady flow and heat transfer past a permeable moving thin needle in a hybrid nanofluid is examined in this study. Here, we consider copper (Cu) and alumina (Al2O3) as hybrid nanoparticles, and water as a base fluid. In addition, the effects of thermophoresis and Brownian motion are taken into consideration. A similarity transformation is used to obtain similarity equations, which are then solved numerically using the boundary value problem solver, bvp4c available in Matlab software (Matlab_R2014b, MathWorks, Singapore). It is shown that heat transfer rate is higher in the presence of hybrid nanoparticles. It is discovered that the non-uniqueness of the solutions is observed for a certain range of the moving parameter λ. We also observed that the bifurcation of the solutions occurs in the region of λ > 0, i.e., when the needle moved toward the origin. Furthermore, we found that the skin friction coefficient and the heat transfer rate at the surface are higher for smaller needle sizes. A reduction in the temperature and nanoparticle concentration was observed with the increasing of the thermophoresis parameter. It was also found that the increase of the Brownian motion parameter leads to an increase in the nanoparticle concentration. Temporal stability analysis shows that only one of the solutions was stable and physically reliable as time evolved

Squeezed Hybrid Nanofluid Flow Over A Permeable Sensor Surface

This paper examines the squeezed hybrid nanofluid flow over a permeable sensor surface with magnetohydrodynamics (MHD) and radiation effects. The alumina (Al2O3) and copper (Cu) are considered as the hybrid nanoparticles, while water is the base fluid. The governing equations are reduced to the similarity equations, using the similarity transformation. The resulting equations are programmed in Matlab software through the bvp4c solver to obtain the numerical solutions. It was found that the heat transfer rate was greater for the hybrid nanofluid, compared to the regular nanofluid. It was observed that dual solutions exist for some values of the permeable parameter S. The upper branch solutions of the skin friction coefficient (Re1/2 x Cf) and the heat transfer rate at the surface (Re−1/2x Nux) enhance with the added Cu nanoparticle (ϕ2) and for larger magnetic strength (M). Moreover, the values of Re1/2x Cf decrease, whereas the values of Re−1/2x Nux increase for both branches, with the rise of the squeeze flow index (b). Besides, an increment of the heat transfer rate at the sensor surface for both branches was observed in the presence of radiation (R). Temporal stability analysis was employed to determine the stability of the dual solutions, and it was discovered that only one of them was stable and physically reliable as time evolve