Reliability-Based Cross-Layer Design of Digital Transmission Systems

In dieser Arbeit werden schichtübergreifende Ansätze ausgehend von der untersten, der physikalische Schicht, betrachtet. Dafür werden die weichen Ausgangswerte des üblicherweise als letzte Komponente der physikalischen Schicht angeordneten Kanaldecodierers verwendet, um die Bit- oder die Wortfehlerwahrscheinlichkeit zu berechnen. Mit der Bit- bzw. Wortfehlerwahrscheinlichkeit steht ein Maß zur Schätzung der Übertragungsqualität zur Verfügung, das schichtübergreifend genutzt werden kann. Ein großer Vorteil dieser Vorgehensweise die Fehlerwahrscheinlichkeit zu berechnen ist ihre Unabhängigkeit von Kanal, Modulationsformat und verwendetem Kanalcode. Zugleich gedruckt erschienen im Shaker Verlag GmbH Aachen.In this thesis, cross-layer approaches based on the lowest layer of the protocol stack, the physical layer, are considered. Towards that goal, the soft output of the last component of the physical layer, the channel decoder, is used to calculate the bit or word error probability. The bit or word error probability is a measure of the transmission quality which can be applied in a cross-layer design. An advantage of this approach to calculate the error probability is its independence of channel, modulation format, and applied channel code. Also available in print from Shaker Verlag, Aachen, Germany

Investigation of Vehicle-to-Everything (V2X) Communication for Autonomous Control of Connected Vehicles

Autonomous Driving Vehicles (ADVs) has received considerable attention in recent years by academia and industry, bringing about a paradigm shift in Intelligent Transportation Systems (ITS), where vehicles operate in close proximity through wireless communication. It is envisioned as a promising technology for realising efficient and intelligent transportation systems, with potential applications for civilian and military purposes. Vehicular network management for ADVs is challenging as it demands mobility, location awareness, high reliability, and low latency data traffic. This research aims to develop and implement vehicular communication in conjunction with a driving algorithm for ADVs feedback control system with a specific focus on the safe displacement of vehicle platoon while sensing the surrounding environment, such as detecting road signs and communicate with other road users such as pedestrian, motorbikes, non-motorised vehicles and infrastructure. However, in order to do so, one must investigate crucial aspects related to the available technology, such as driving behaviour, low latency communication requirement, communication standards, and the reliability of such a mechanism to decrease the number of traffic accidents and casualties significantly. To understand the behaviour of wireless communication compared to the theoretical data rates, throughput, and roaming behaviour in a congested indoor line-of-sight heterogeneous environment, we first carried out an experimental study for IEEE 802.11a, 802.11n and 802.11ac standards in a 5 GHz frequency spectrum. We validated the results with an analytical path loss model as it is essential to understand how the client device roams or decides to roam from one Access Point to another and vice-versa. We observed seamless roaming between the tested protocols irrespective of their operational environment (indoor or outdoor); their throughput efficiency and data rate were also improved by 8-12% when configured with Short Guard Interval (SGI) of 400ns compared to the theoretical specification of the tested protocols. Moreover, we also investigated the Software-Defined Networking (SDN) for vehicular communication and compared it with the traditional network, which is generally incorporated vertically where control and data planes are bundled collectively. The SDN helped gain more flexibility to support multiple core networks for vehicular communication and tackle the potential challenges of network scalability for vehicular applications raised by the ADVs. In particular, we demonstrate that the SDN improves throughput efficiency by 4% compared to the traditional network while ensuring efficient bandwidth and resource management. Finally, we proposed a novel data-driven coordination model which incorporates Vehicle-to-Everything (V2X) communication and Intelligent Driver Model (IDM), together called V2X Enabled Intelligent Driver Model (VX-IDM). Our model incorporates a Car-Following Model (CFM), i.e., IDM, to model a vehicle platoon in an urban and highway traffic scenario while ensuring the vehicle platoon's safety with the integration of IEEE 802.11p Vehicle-to-Infrastructure (V2I) communication scheme. The model integrates the 802.11p V2I communication channel with the IDM in MATLAB using ODE‐45 and utilises the 802.11p simulation toolbox for configuring vehicular channels. To demonstrate model functionality in urban and highway traffic environments, we developed six case studies. We also addressed the heterogeneity issue of wireless networks to improve the overall network reliability and efficiency by estimating the Signal-to-Noise Ratio (SNR) parameters for the platoon vehicle's displacement and location on the road from Road-Side-Units (RSUs). The simulation results showed that inter-vehicle spacing could be steadily maintained at a minimum safe value at all the time. Moreover, the model has a fault-tolerant mechanism that works even when communication with infrastructure is interrupted or unavailable, making the VX-IDM model collision-free

Recent Developments on Mobile Ad-Hoc Networks and Vehicular Ad-Hoc Networks

This book presents collective works published in the recent Special Issue (SI) entitled "Recent Developments on Mobile Ad-Hoc Networks and Vehicular Ad-Hoc Networks”. These works expose the readership to the latest solutions and techniques for MANETs and VANETs. They cover interesting topics such as power-aware optimization solutions for MANETs, data dissemination in VANETs, adaptive multi-hop broadcast schemes for VANETs, multi-metric routing protocols for VANETs, and incentive mechanisms to encourage the distribution of information in VANETs. The book demonstrates pioneering work in these fields, investigates novel solutions and methods, and discusses future trends in these field

Improving TCP behaviour to non-invasively share spectrum with safety messages in VANET

There is a broad range of technologies available for wireless communications for moving vehicles, such as Worldwide Interoperability for Microwave Access (WiMax), 3G, Dedicated Short Range Communication (DSRC)/ Wireless Access for Vehicular Environment (WAVE) and Mobile Broadband Wireless Access (MBWA). These technologies are needed to support delay-sensitive safety related applications such as collision avoidance and emergency breaking. Among them, the IEEE802.11p standard (aka DSRC/WAVE), a Wi-Fi based medium RF range technology, is considered to be one of the best suited draft architectures for time-sensitive safety applications. In addition to safety applications, however, services of non-safety nature like electronic toll tax collection, infotainment and traffic control are also becoming important these days. To support delay-insensitive infotainment applications, the DSRC protocol suite also provides facilities to use Internet Protocols. The DSRC architecture actually consists of WAVE Short Messaging Protocol (WSMP) specifically formulated for realtime safety applications as well as the conventional transport layer protocols TCP/UDP for non-safety purposes. But the layer four protocol TCP was originally designed for reliable data delivery only over wired networks, and so the performance quality was not guaranteed for the wireless medium, especially in the highly unstable network topology engendered by fast moving vehicles. The vehicular wireless medium is inherently unreliable because of intermittent disconnections caused by moving vehicles, and in addition, it suffers from multi-path and fading phenomena (and a host of others) that greatly degrade the network performance. One of the TCP problems in the context of vehicular wireless network is that it interprets transmission errors as symptomatic of an incipient congestion situation and as a result, reduces the throughput deliberately by frequently invoking slow-start congestion control algorithms. Despite the availability of many congestion control mechanisms to address this problem, the conventional TCP continues to suffer from poor performance when deployed in the Vehicular Ad-hoc Network (VANET) environment. Moreover, the way non-safety applications, when pressed into service, will treat the existing delay-sensitive safety messaging applications and the way these two types of applications interact between them are not (well) understood, and therefore, in order for them to coexist, the implication and repercussion need to be examined closely. This is especially important as IEEE 802.11p standards are not designed keeping in view the issues TCP raises in relation to safety messages. This dissertation addresses the issues arising out of this situation and in particular confronts the congestion challenges thrown up in the context of heterogenous communication in VANET environment by proposing an innovative solution with two optimized congestion control algorithms. Extensive simulation studies conducted by the author shows that both these algorithms have improved TCP performance in terms of metrics like Packet Delivery Fraction (PDF), Packet Loss and End-to-End Delay (E2ED), and at the same time they encourage the non-safety TCP application to behave unobtrusively and cooperatively to a large extent with DSRC’s safety applications. The first algorithm, called vScalable-TCP – a modification of the existing TCPScalable variant – introduces a reliable transport protocol suitable for DSRC. In the proposed approach, whenever packets are discarded excessively due to congestion, the slow-start mechanism is purposely suppressed temporarily to avoid further congestion and packet loss. The crucial idea here is how to adjust and regulate the behaviour of vScalable-TCP in a way that the existing safety message flows are least disturbed. The simulation results confirm that the new vScalable-TCP provides better performance for real-time safety applications than TCP-Reno and other TCP variants considered in this thesis in terms of standard performance metrics. The second algorithm, named vLP-TCP – a modification of the existing TCP-LP variant – is designed to test and demonstrate that the strategy developed for vScalable-TCP is also compatible with another congestion control mechanism and achieves the same purpose. This expectation is borne out well by the simulation results. The same slow-start congestion management strategy has been employed but with only a few amendments. This modified algorithm also improves substantially the performance of basic safety management applications. The present work thus clearly confirms that both vScalable-TCP and vLP-TCP algorithms – the prefix ‘v’ to the names standing for ‘vehicular’ – outperform the existing unadorned TCP-Scalable and TCP-LP algorithms, in terms of standard performance metrics, while at the same time behaving in a friendly manner, by way of sharing bandwidth non-intrusively with DSRC safety applications. This paves the way for the smooth and harmonious coexistence of these two broad, clearly incompatible or complementary categories of applications – viz. time-sensitive safety applications and delay-tolerant infotainment applications – by narrowing down their apparent impedance or behavioural mismatch, when they are coerced to go hand in hand in a DSRC environment

Provision Quality-of-Service Controlled Content Distribution in Vehicular Ad Hoc Networks

By equipping vehicles with the on-board wireless facility, the newly emerged vehicular networking targets to provision the broadband serves to vehicles. As such, a variety of novel and exciting applications can be provided to vehicular users to enhance their road safety and travel comfort, and finally raise a complete change to their on-road life. As the content distribution and media/video streaming, such as Youtube, Netflix, nowadays have become the most popular Internet applications, to enable the efficient content distribution and audio/video streaming services is thus of the paramount importance to the success of the vehicular networking. This, however, is fraught with fundamental challenges due to the distinguished natures of vehicular networking. On one hand, the vehicular communication is challenged by the spotty and volatile wireless connections caused by the high mobility of vehicles. This makes the download performance of connections very unstable and dramatically change over time, which directly threats to the on-top media applications. On the other hand, a vehicular network typically involves an extremely large-scale node population (e.g., hundreds or thousandths of vehicles in a region) with intense spatial and temporal variations across the network geometry at different times. This dictates any designs to be scalable and fully distributed which should not only be resilient to the network dynamics, but also provide the guaranteed quality-of-service (QoS) to users. The purpose of this dissertation is to address the challenges of the vehicular networking imposed by its intrinsic dynamic and large-scale natures, and build the efficient, scalable and, more importantly, practical systems to enable the cost-effective and QoS guaranteed content distribution and media streaming services to vehicular users. Note that to effective- ly deliver the content from the remote Internet to in-motion vehicles, it typically involves three parts as: 1.) an infrastructure grid of gateways which behave as the data depots or injection points of Internet contents and services to vehicles, 2.) protocol at gateways which schedules the bandwidth resource at gateways and coordinates the parallel transmissions to different vehicles, and 3.) the end-system control mechanism at receivers which adapts the receiver’s content download/playback strategy based on the available network throughput to provide users with the desired service experience. With above three parts in mind, the entire research work in this dissertation casts a systematic view to address each part in one topic with: 1.) design of large-scale cost-effective content distribution infrastructure, 2.) MAC (media access control) performance evaluation and channel time scheduling, and 3.) receiver adaptation and adaptive playout in dynamic download environment. In specific, in the first topic, we propose a practical solution to form a large-scale and cost-effective content distribution infrastructure in the city. We argue that a large-scale infrastructure with the dedicated resources, including storage, computing and communication capacity, is necessary for the vehicular network to become an alternative of 3G/4G cellular network as the dominating approach of ubiquitous content distribution and data services to vehicles. On addressing this issue, we propose a fully distributed scheme to form a large-scale infrastructure by the contributions of individual entities in the city, such as grocery stores, movie theaters, etc. That is to say, the installation and maintenance costs are shared by many individuals. In this topic, we explain the design rationale on how to motivate individuals to contribute, and specify the detailed design of the system, which is embodied with distributed protocols and performance evaluation. The second topic investigates on the MAC throughput performance of the vehicle-to- infrastructure (V2I) communications when vehicles drive through RSUs, namely drive-thru Internet. Note that with a large-scale population of fast-motion nodes contending the chan- nel for transmissions, the MAC performance determines the achievable nodal throughput and is crucial to the on-top applications. In this topic, using a simple yet accurate Marko- vian model, we first show the impacts of mobility (characterized by node velocity and moving directions) on the nodal and system throughput performance, respectively. Based on this analysis, we then propose three enhancement schemes to timely adjust the MAC parameters in tune with the vehicle mobility to achieve the maximal the system throughput. The last topic investigates on the end-system design to deliver the user desired media streaming services in the vehicular environment. In specific, the vehicular communications are notoriously known for the intermittent connectivity and dramatically varying throughput. Video streaming on top of vehicular networks therefore inevitably suffers from the severe network dynamics, resulting in the frequent jerkiness or even freezing video playback. To address this issue, an analytical model is first developed to unveil the impacts of network dynamics on the resultant video performance to users in terms of video start-up delay and smoothness of playback. Based on the analysis, the adaptive playout buffer mechanism is developed to adapt the video playback strategy at receivers towards the user-defined video quality. The proposals developed in the three topics are validated with the extensive and high fidelity simulations. We believe that our analysis developed in the dissertation can provide insightful lights on understanding the fundamental performance of the vehicular content distribution networks from the aspects of session-level download performance in urban vehicular networks (topic 1), MAC throughput performance (topic 2), and user perceived media quality (topic 3). The protocols developed in the three topics, respectively, offer practical and efficient solutions to build and optimize the vehicular content distribution networks

Journal of Telecommunications and Information Technology, 2014, nr 3

kwartalni