Motion-Compensated Coding and Frame-Rate Up-Conversion: Models and Analysis

Block-based motion estimation (ME) and compensation (MC) techniques are widely used in modern video processing algorithms and compression systems. The great variety of video applications and devices results in numerous compression specifications. Specifically, there is a diversity of frame-rates and bit-rates. In this paper, we study the effect of frame-rate and compression bit-rate on block-based ME and MC as commonly utilized in inter-frame coding and frame-rate up conversion (FRUC). This joint examination yields a comprehensive foundation for comparing MC procedures in coding and FRUC. First, the video signal is modeled as a noisy translational motion of an image. Then, we theoretically model the motion-compensated prediction of an available and absent frames as in coding and FRUC applications, respectively. The theoretic MC-prediction error is further analyzed and its autocorrelation function is calculated for coding and FRUC applications. We show a linear relation between the variance of the MC-prediction error and temporal-distance. While the affecting distance in MC-coding is between the predicted and reference frames, MC-FRUC is affected by the distance between the available frames used for the interpolation. Moreover, the dependency in temporal-distance implies an inverse effect of the frame-rate. FRUC performance analysis considers the prediction error variance, since it equals to the mean-squared-error of the interpolation. However, MC-coding analysis requires the entire autocorrelation function of the error; hence, analytic simplicity is beneficial. Therefore, we propose two constructions of a separable autocorrelation function for prediction error in MC-coding. We conclude by comparing our estimations with experimental results

Statistical framework for video decoding complexity modeling and prediction

Video decoding complexity modeling and prediction is an increasingly important issue for efficient resource utilization in a variety of applications, including task scheduling, receiver-driven complexity shaping, and adaptive dynamic voltage scaling. In this paper we present a novel view of this problem based on a statistical framework perspective. We explore the statistical structure (clustering) of the execution time required by each video decoder module (entropy decoding, motion compensation, etc.) in conjunction with complexity features that are easily extractable at encoding time (representing the properties of each module's input source data). For this purpose, we employ Gaussian mixture models (GMMs) and an expectation-maximization algorithm to estimate the joint execution-time - feature probability density function (PDF). A training set of typical video sequences is used for this purpose in an offline estimation process. The obtained GMM representation is used in conjunction with the complexity features of new video sequences to predict the execution time required for the decoding of these sequences. Several prediction approaches are discussed and compared. The potential mismatch between the training set and new video content is addressed by adaptive online joint-PDF re-estimation. An experimental comparison is performed to evaluate the different approaches and compare the proposed prediction scheme with related resource prediction schemes from the literature. The usefulness of the proposed complexity-prediction approaches is demonstrated in an application of rate-distortion-complexity optimized decoding

Aggregated motion estimation for real-time MRI reconstruction

Real-time magnetic resonance imaging (MRI) methods generally shorten the measuring time by acquiring less data than needed according to the sampling theorem. In order to obtain a proper image from such undersampled data, the reconstruction is commonly defined as the solution of an inverse problem, which is regularized by a priori assumptions about the object. While practical realizations have hitherto been surprisingly successful, strong assumptions about the continuity of image features may affect the temporal fidelity of the estimated images. Here we propose a novel approach for the reconstruction of serial real-time MRI data which integrates the deformations between nearby frames into the data consistency term. The method is not required to be affine or rigid and does not need additional measurements. Moreover, it handles multi-channel MRI data by simultaneously determining the image and its coil sensitivity profiles in a nonlinear formulation which also adapts to non-Cartesian (e.g., radial) sampling schemes. Experimental results of a motion phantom with controlled speed and in vivo measurements of rapid tongue movements demonstrate image improvements in preserving temporal fidelity and removing residual artifacts.Comment: This is a preliminary technical report. A polished version is published by Magnetic Resonance in Medicine. Magnetic Resonance in Medicine 201

비디오 프레임 보간을 위한 다중 벡터 기반의 MEMC 및 심층 CNN

학위논문 (박사)-- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2019. 2. 이혁재.Block-based hierarchical motion estimations are widely used and are successful in generating high-quality interpolation. However, it still fails in the motion estimation of small objects when a background region moves in a different direction. This is because the motion of small objects is neglected by the down-sampling and over-smoothing operations at the top level of image pyramids in the maximum a posterior (MAP) method. Consequently, the motion vector of small objects cannot be detected at the bottom level, and therefore, the small objects often appear deformed in an interpolated frame. This thesis proposes a novel algorithm that preserves the motion vector of the small objects by adding a secondary motion vector candidate that represents the movement of the small objects. This additional candidate is always propagated from the top to the bottom layers of the image pyramid. Experimental results demonstrate that the intermediate frame interpolated by the proposed algorithm significantly improves the visual quality when compared with conventional MAP-based frame interpolation. In motion compensated frame interpolation, a repetition pattern in an image makes it difficult to derive an accurate motion vector because multiple similar local minima exist in the search space of the matching cost for motion estimation. In order to improve the accuracy of motion estimation in a repetition region, this thesis attempts a semi-global approach that exploits both local and global characteristics of a repetition region. A histogram of the motion vector candidates is built by using a voter based voting system that is more reliable than an elector based voting system. Experimental results demonstrate that the proposed method significantly outperforms the previous local approach in term of both objective peak signal-to-noise ratio (PSNR) and subjective visual quality. In video frame interpolation or motion-compensated frame rate up-conversion (MC-FRUC), motion compensation along unidirectional motion trajectories directly causes overlaps and holes issues. To solve these issues, this research presents a new algorithm for bidirectional motion compensated frame interpolation. Firstly, the proposed method generates bidirectional motion vectors from two unidirectional motion vector fields (forward and backward) obtained from the unidirectional motion estimations. It is done by projecting the forward and backward motion vectors into the interpolated frame. A comprehensive metric as an extension of the distance between a projected block and an interpolated block is proposed to compute weighted coefficients in the case when the interpolated block has multiple projected ones. Holes are filled based on vector median filter of non-hole available neighbor blocks. The proposed method outperforms existing MC-FRUC methods and removes block artifacts significantly. Video frame interpolation with a deep convolutional neural network (CNN) is also investigated in this thesis. Optical flow and video frame interpolation are considered as a chicken-egg problem such that one problem affects the other and vice versa. This thesis presents a stack of networks that are trained to estimate intermediate optical flows from the very first intermediate synthesized frame and later the very end interpolated frame is generated by the second synthesis network that is fed by stacking the very first one and two learned intermediate optical flows based warped frames. The primary benefit is that it glues two problems into one comprehensive framework that learns altogether by using both an analysis-by-synthesis technique for optical flow estimation and vice versa, CNN kernels based synthesis-by-analysis. The proposed network is the first attempt to bridge two branches of previous approaches, optical flow based synthesis and CNN kernels based synthesis into a comprehensive network. Experiments are carried out with various challenging datasets, all showing that the proposed network outperforms the state-of-the-art methods with significant margins for video frame interpolation and the estimated optical flows are accurate for challenging movements. The proposed deep video frame interpolation network to post-processing is applied to the improvement of the coding efficiency of the state-of-art video compress standard, HEVC/H.265 and experimental results prove the efficiency of the proposed network.블록 기반 계층적 움직임 추정은 고화질의 보간 이미지를 생성할 수 있어 폭넓게 사용되고 있다. 하지만, 배경 영역이 움직일 때, 작은 물체에 대한 움직임 추정 성능은 여전히 좋지 않다. 이는 maximum a posterior (MAP) 방식으로 이미지 피라미드의 최상위 레벨에서 down-sampling과 over-smoothing으로 인해 작은 물체의 움직임이 무시되기 때문이다. 결과적으로 이미지 피라미드의 최하위 레벨에서 작은 물체의 움직임 벡터는 검출될 수 없어 보간 이미지에서 작은 물체는 종종 변형된 것처럼 보인다. 본 논문에서는 작은 물체의 움직임을 나타내는 2차 움직임 벡터 후보를 추가하여 작은 물체의 움직임 벡터를 보존하는 새로운 알고리즘을 제안한다. 추가된 움직임 벡터 후보는 항상 이미지 피라미드의 최상위에서 최하위 레벨로 전파된다. 실험 결과는 제안된 알고리즘의 보간 생성 프레임이 기존 MAP 기반 보간 방식으로 생성된 프레임보다 이미지 화질이 상당히 향상됨을 보여준다. 움직임 보상 프레임 보간에서, 이미지 내의 반복 패턴은 움직임 추정을 위한 정합 오차 탐색 시 다수의 유사 local minima가 존재하기 때문에 정확한 움직임 벡터 유도를 어렵게 한다. 본 논문은 반복 패턴에서의 움직임 추정의 정확도를 향상시키기 위해 반복 영역의 local한 특성과 global한 특성을 동시에 활용하는 semi-global한 접근을 시도한다. 움직임 벡터 후보의 히스토그램은 선거 기반 투표 시스템보다 신뢰할 수 있는 유권자 기반 투표 시스템 기반으로 형성된다. 실험 결과는 제안된 방법이 이전의 local한 접근법보다 peak signal-to-noise ratio (PSNR)와 주관적 화질 판단 관점에서 상당히 우수함을 보여준다. 비디오 프레임 보간 또는 움직임 보상 프레임율 상향 변환 (MC-FRUC)에서, 단방향 움직임 궤적에 따른 움직임 보상은 overlap과 hole 문제를 일으킨다. 본 연구에서 이러한 문제를 해결하기 위해 양방향 움직임 보상 프레임 보간을 위한 새로운 알고리즘을 제시한다. 먼저, 제안된 방법은 단방향 움직임 추정으로부터 얻어진 두 개의 단방향 움직임 영역(전방 및 후방)으로부터 양방향 움직임 벡터를 생성한다. 이는 전방 및 후방 움직임 벡터를 보간 프레임에 투영함으로써 수행된다. 보간된 블록에 여러 개의 투영된 블록이 있는 경우, 투영된 블록과 보간된 블록 사이의 거리를 확장하는 기준이 가중 계수를 계산하기 위해 제안된다. Hole은 hole이 아닌 이웃 블록의 vector median filter를 기반으로 처리된다. 제안 방법은 기존의 MC-FRUC보다 성능이 우수하며, 블록 열화를 상당히 제거한다. 본 논문에서는 CNN을 이용한 비디오 프레임 보간에 대해서도 다룬다. Optical flow 및 비디오 프레임 보간은 한 가지 문제가 다른 문제에 영향을 미치는 chicken-egg 문제로 간주된다. 본 논문에서는 중간 optical flow 를 계산하는 네트워크와 보간 프레임을 합성 하는 두 가지 네트워크로 이루어진 하나의 네트워크 스택을 구조를 제안한다. The final 보간 프레임을 생성하는 네트워크의 경우 첫 번째 네트워크의 출력인 보간 프레임 와 중간 optical flow based warped frames을 입력으로 받아서 프레임을 생성한다. 제안된 구조의 가장 큰 특징은 optical flow 계산을 위한 합성에 의한 분석법과 CNN 기반의 분석에 의한 합성법을 모두 이용하여 하나의 종합적인 framework로 결합하였다는 것이다. 제안된 네트워크는 기존의 두 가지 연구인 optical flow 기반 프레임 합성과 CNN 기반 합성 프레임 합성법을 처음 결합시킨 방식이다. 실험은 다양하고 복잡한 데이터 셋으로 이루어졌으며, 보간 프레임 quality 와 optical flow 계산 정확도 측면에서 기존의 state-of-art 방식에 비해 월등히 높은 성능을 보였다. 본 논문의 후 처리를 위한 심층 비디오 프레임 보간 네트워크는 코딩 효율 향상을 위해 최신 비디오 압축 표준인 HEVC/H.265에 적용할 수 있으며, 실험 결과는 제안 네트워크의 효율성을 입증한다.Abstract i Table of Contents iv List of Tables vii List of Figures viii Chapter 1. Introduction 1 1.1. Hierarchical Motion Estimation of Small Objects 2 1.2. Motion Estimation of a Repetition Pattern Region 4 1.3. Motion-Compensated Frame Interpolation 5 1.4. Video Frame Interpolation with Deep CNN 6 1.5. Outline of the Thesis 7 Chapter 2. Previous Works 9 2.1. Previous Works on Hierarchical Block-Based Motion Estimation 9 2.1.1. Maximum a Posterior (MAP) Framework 10 2.1.2.Hierarchical Motion Estimation 12 2.2. Previous Works on Motion Estimation for a Repetition Pattern Region 13 2.3. Previous Works on Motion Compensation 14 2.4. Previous Works on Video Frame Interpolation with Deep CNN 16 Chapter 3. Hierarchical Motion Estimation for Small Objects 19 3.1. Problem Statement 19 3.2. The Alternative Motion Vector of High Cost Pixels 20 3.3. Modified Hierarchical Motion Estimation 23 3.4. Framework of the Proposed Algorithm 24 3.5. Experimental Results 25 3.5.1. Performance Analysis 26 3.5.2. Performance Evaluation 29 Chapter 4. Semi-Global Accurate Motion Estimation for a Repetition Pattern Region 32 4.1. Problem Statement 32 4.2. Objective Function and Constrains 33 4.3. Elector based Voting System 34 4.4. Voter based Voting System 36 4.5. Experimental Results 40 Chapter 5. Multiple Motion Vectors based Motion Compensation 44 5.1. Problem Statement 44 5.2. Adaptive Weighted Multiple Motion Vectors based Motion Compensation 45 5.2.1. One-to-Multiple Motion Vector Projection 45 5.2.2. A Comprehensive Metric as the Extension of Distance 48 5.3. Handling Hole Blocks 49 5.4. Framework of the Proposed Motion Compensated Frame Interpolation 50 5.5. Experimental Results 51 Chapter 6. Video Frame Interpolation with a Stack of Deep CNN 56 6.1. Problem Statement 56 6.2. The Proposed Network for Video Frame Interpolation 57 6.2.1. A Stack of Synthesis Networks 57 6.2.2. Intermediate Optical Flow Derivation Module 60 6.2.3. Warping Operations 62 6.2.4. Training and Loss Function 63 6.2.5. Network Architecture 64 6.2.6. Experimental Results 64 6.2.6.1. Frame Interpolation Evaluation 64 6.2.6.2. Ablation Experiments 77 6.3. Extension for Quality Enhancement for Compressed Videos Task 83 6.4. Extension for Improving the Coding Efficiency of HEVC based Low Bitrate Encoder 88 Chapter 7. Conclusion 94 References 97Docto

Dynamically variable step search motion estimation algorithm and a dynamically reconfigurable hardware for its implementation

Motion Estimation (ME) is the most computationally intensive part of video compression and video enhancement systems. For the recently available High Definition (HD) video formats, the computational complexity of De full search (FS) ME algorithm is prohibitively high, whereas the PSNR obtained by fast search ME algorithms is low. Therefore, ill this paper, we present Dynamically Variable Step Search (DVSS) ME algorithm for Processing high definition video formats and a dynamically reconfigurable hardware efficiently implementing DVSS algorithm. The architecture for efficiently implementing DVSS algorithm. The simulation results showed that DVSS algorithm performs very close to FS algorithm by searching much fewer search locations than FS algorithm and it outperforms successful past search ME algorithms by searching more search locations than these algorithms. The proposed hardware is implemented in VHDL and is capable, of processing high definition video formats in real time. Therefore, it can be used in consumer electronics products for video compression, frame rate up-conversion and de-interlacing(1)

Hierarchical motion estimation for side information creation in Wyner-Ziv video coding

Recently, several video coding solutions based on the distributed source coding paradigm have appeared in the literature. Among them, Wyner-Ziv video coding schemes enable to achieve a flexible distribution of the computational complexity between the encoder and decoder, promising to fulfill requirements of emerging applications such as visual sensor networks and wireless surveillance. To achieve a performance comparable to the predictive video coding solutions, it is necessary to increase the quality of the side information, this means the estimation of the original frame created at the decoder. In this paper, a hierarchical motion estimation (HME) technique using different scales and increasingly smaller block sizes is proposed to generate a more reliable estimation of the motion field. The HME technique is integrated in a well known motion compensated frame interpolation framework responsible for the creation of the side information in a Wyner-Ziv video decoder. The proposed technique enables to achieve improvements in the rate-distortion (RD) performance up to 7 dB when compared to H.263+ Intra and 3 dB when compared to H.264/AVC Intra