Analysis, Design and Experimental Validation of Modified Simple Soft Switching DC-DC Boost Converter

This paper investigates a modified simple soft switching dc-dc converter for low power applications. This simple topology uses an auxiliary switch, an inductor and a capacitor to operate the converter without switching losses. The efficiency of the converter is improved by transferring the energy that would be dissipated during the switching to the load. The main switch turns-on with zero current switching (ZCS) and turns-off with zero voltage switching (ZVS), while the auxiliary switch turns-on and turns-off with zero voltage switching (ZVS). The detailed theoretical analysis and the design equations are described. In addition to that, the analysis of proposed converter is demonstrated by both simulation and experimental results for effectiveness of the study.Web of Science16433733

High efficiency and high gain non-isolated bidirectional dc-dc converter with soft switching capability

The non-isolated dc-dc power converters are considered as a unique option for flexible voltage control and adaptation in the modern energy conversion systems due to their simple and light configurations. To this date, these converters are primarily investigated to generate high efficiency and high gain with a sustained soft switching capability and a smaller footprint. On that account, this work proposes two effective solutions to address the aforementioned issues. First, a high-efficiency soft switching non-isolated bidirectional dc-dc converter with a simple configuration is proposed. The converter executes the zero voltage zero current switching (ZVZCS) over a wide operating region to ensure high efficiency. For verification, a 150 W experimental prototype is built and tested for soft switching performance by varying the input voltage, switching frequency and the loading. It is observed that the efficiency remains consistently high and has a full-load maximum of 98.2% in the boost mode and 97.5% in the buck mode. The analysis of the Electromagnetic Interference (EMI) performance of the converter also shows the improvement in the noise signature. Second, an improved high gain zero voltage switching (ZVS) nonisolated bidirectional dc-dc converter is proposed. The high gain is realized by using an intermediate energy storage cell with reduced size. Besides, the ZVS is implemented by two integrated auxiliary resonant networks. These networks ensure sustained ZVS operation over the entire duty ratio. A 200 W prototype is built to verify the concept. As a result, a full load efficiency of 97.5% (in boost mode) and 95.5% (in buck mode) is recorded at fs= 30 kHz. Also, these efficiencies are recorded as 97% (boost mode) and 94.5% (buck mode) at fs= 100 kHz. Moreover, it is observed that the efficiency (and so the soft switching) is consistent over the entire gain profile. However, there is a slight additional drop of 1.5% (boost mode) and 1% (buck mode) at extreme duty ratios. Both converters also implement soft switching for auxiliary switches and eliminate the reverse recovery loss

Development of Efficient Soft Switching Synchronous Buck Converter Topologies for Low Voltage High Current Applications

Switched mode power supplies (SMPS) have emerged as the popular candidate in all the power processing applications. The demand is soaring to design high power density converters. For reducing the size, weight, it is imperative to channelize the power at high switching frequency. High switching frequency converters insist upon soft switching techniques to curtail the switching losses. Several soft switching topologies have been evolved in the recent years. Nowadays, the soft switching converters are vastly applied modules and the demand is increasing for high power density and high efficiency modules by minimizing the conduction and switching losses. These modules are generally observed in many applications such as laptops, desktop processors for the enhancement of the battery life time. Apart from these applications, solar and spacecraft applications demand is increasing progressively for stressless and more efficient modules for maximizing the storage capacity which inturn enhances the power density that improves the battery life to supply in the uneven times. Modern trends in the consumer electronic market focus increases in the demand of lower voltage supplies. Conduction losses are significantly reduced by synchronous rectifiers i.e., MOSFET’s are essentially used in many of the low voltage power supplies. Active and passive auxiliary circuits are used in tandem with synchronous rectifier to diminish the crucial loss i.e., switching loss and also it minimizes the voltage and current stresses of the semiconductor devices. The rapid progress in the technology and emerging portable applications poses serious challenges to power supply design engineers for an efficient power converter design at high power density. The primary aim is to design and develop high efficiency, high power density topologies like: buck, synchronous buck and multiphase buck converters with the integration of soft switching techniques to minimize conduction and switching losses sustaining the voltage and current stresses within the tolerable range. In this work, two ZVT-ZCT PWM synchronous buck converters are introduced, one with active auxiliary circuit and the other one with passive auxiliary circuit. The operating principle and comprehensive steady state analysis of the ZVT-ZCT PWM synchronous buck converters are presented. The converters are designed to have high efficiency and low voltage that is suitable for high power density application. The semiconductor devices used in the topologies in addition to the main switch operate with soft switching conditions. The viii Abstract topologies proposed render a large overall efficiency in contrast to the contemporary topologies. In addition the circuit’s size is less, reliable and have high performance-cost ratio. The new generation microprocessor demands the features such as low voltage, high current, high power density and high efficiency etc., in the design of power supplies. The supply voltage for the future generation microprocessors must be low, in order to decrease the power consumption. The voltage levels are dripping to a level even less than 0.7V, and the power consumption increases as there is an increase in the current requirement for the processor. In order to meet the demands of the new generation microprocessor power supply, a soft switching multiphase PWM synchronous buck converter is proposed. The losses in the proposed topology due to increasing components are pared down by the proposed soft switching technique. The proposed converters in this research work are precisely described by the mathematical modelling and their operational modes. The practicality of the proposed converters for different applications is authenticated by their simulation and experimental results