Observer design for a nonlinear diffusion system based on the Kirchhoff transformation

International audienceThis paper deals with the state estimation for a nonlinear diffusion system. An observer that reconstructs the whole state, from the available measurements, is proposed based on an equivalent linear diffusion model obtained using the Kirchhoff tangent transformation. This bijective mapping allows to apply the available and powerful state estimation theory of linear distributed parameter systems and simplifies the observer design. Hence, an observer can be designed for the obtained equivalent linear diffusion system and by using the Kirchhoff transformation, the whole state of the original nonlinear diffusion system is recovered. The observability analysis of the nonlinear diffusion system and the convergence of the proposed observer are also investigated based on the equivalent linear diffusion system. The effectiveness of the proposed observer is shown, through numerical simulation runs, in the case of a heated steel rod by considering both an uniformly distributed and a punctual boundary sensing

Dynamical Analysis and Robust Control Synthesis for Water Treatment Processes

Nowadays, water demand and water scarcity are very urgent issues due to population growth, drought and poor water quality all over the world. Therefore, water treatment plants are playing a vital role for good living condition of human. Water area needs more concentration study to increase water productivity and decrease water cost. This dissertation presents the analysis and control of water treatment plants using robust control techniques. The applied control algorithms include H∞, gain scheduled and observer-based loop-shaping control technique. They are modern control algorithms and very powerful in robust controlling of systems with uncertainties and disturbances. The water treatment plants include a desalination system and a wastewater process. Since fresh water scarcity is getting more serious, the desalination plants are to produce drinking water and wastewater treatment plants give the reusable water. The desalination system is a RO one used to produce drinking water from seawater and brackish water. The nonlinear behaviors of this system is carefully analyzed before the linearization. Due to the uncertainty caused by concentration polarization, the system is linearized using linear state-space parametric uncertainty framework. The system also suffer from many disturbances which water hammer is one of the most influential one. The mixed robust H∞ and μ-synthesis control algorithm is applied to control the RO system coping with large uncertainties, disturbances and noises. The wastewater treatment process is an activated sludge process. This biological process use microorganisms to convert organic and certain inorganic matter from wastewater into cell mass. The process is very complex with many coupled biological and chemical reactions. Due to the large variation in the influent flow, the system is modelized and linearized as a linear parametric varying system using affine parameter-dependent representation. Since the influent flow is quickly variable and easily to be measured, the robust gain scheduled robust controller is applied to deal with the large uncertainty caused by the scheduled parameter. This control algorithm often gives better performances than those of general robust H∞ one. In the wastewater treatment plant, there exist an anaerobic digestion, which is controlled by the observer-based loop-shaping algorithm. The simulations show that all the controllers can effectively deal with large uncertainties, disturbances and noises in water treatment plants. They help improve the system performances and safeties, save energy and reduce product water costs. The studies contribute some potential control approaches for water treatment plants, which is currently a very active research area in the world.Contents ······················································································· iv List of Tables ··············································································· viii List of Figures ··············································································· ix Chapter 1. Introduction ···································································· 1 1.1 Reverse osmosis process ···································································· 2 1.2 Activated sludge process ···································································· 6 1.3 Robust H∞ and gain scheduling control ··················································· 10 Chapter 2. Robust H∞ controller ······················································· 13 2.1 Introduction ·················································································· 13 2.2 Uncertainty modelling ······································································ 13 2.2.1 Unstructured uncertainties ···························································· 14 2.2.2 Parametric uncertainties ······························································· 15 2.2.3 Structured uncertainties ································································ 16 2.2.4 Linear fractional transformation ······················································ 16 2.3 Stability criterion ············································································ 17 2.3.1 Small gain theorem ····································································· 17 2.3.2 Structured singular value (muy) synthesis brief definition ·························· 19 2.4 Robustness analysis and controller design ··············································· 20 2.4.1 Forming generalised plant and N-delta structure ····································· 20 2.4.2 Robustness analysis ···································································· 24 2.5 Reduced controller ·········································································· 26 2.5.1 Truncation ··············································································· 27 2.5.2 Residualization ········································································· 29 2.5.3 Balanced realization···································································· 29 2.5.4 Optimal Hankel norm approximation ················································ 31 Chapter 3. Robust gain scheduling controller ······································· 37 3.1 Introduction ·················································································· 37 3.2 Linear parameter varying (LPV) system ·················································· 39 3.3 Matrix Polytope ·············································································· 40 3.4 Polytope and affine parameter-dependent representation ······························· 41 3.4.1 Polytope representation ································································ 41 3.4.2 Affine parameter-dependent representation ········································· 42 3.5 Quadratic stability of LPV systems and quadratic (robust) H∞ performance ········· 43 3.6 Robust gain scheduling ····································································· 44 3.6.1 LPV system linearization ······························································ 44 3.6.2 Polytope-based gain scheduling ······················································ 45 3.6.3 LFT-based gain scheduling ··························································· 48 Chapter 4. Mixed robust H∞ and μ-synthesis controller applied for a reverse osmosis desalination system ····························································· 52 4.1 RO principles ················································································ 52 4.1.1 Osmosis and reverse osmosis ························································· 52 4.1.2 Dead-end filtration and cross-flow filtration ········································ 53 4.2 Membranes ··················································································· 54 4.2.1 Structure and material ································································· 54 4.2.2 Hollow fine fiber membrane module ················································ 55 4.2.3 Spiral wound membrane module ····················································· 57 4.3 Nonlinear RO modelling and analysis ···················································· 58 4.3.1 RO system introduction ······························································· 58 4.3.2 Modelling ··············································································· 60 4.3.3 Nonlinear analysis ······································································ 62 4.3.4 Concentration polarization ···························································· 64 4.4 Water hammer phenomenon ······························································· 66 4.4.1 Water hammer, column separation and vaporous cavitation ······················ 66 4.4.2 Water hammer analysis and simulation ·············································· 69 4.4.3 Prevention of water hammer effect··················································· 78 4.5 RO linearization ············································································· 79 4.5.1 Nominal linearization ·································································· 79 4.5.2 Uncertainty modeling ·································································· 81 4.5.3 Parametric uncertainty linearization ················································· 83 4.6 Robust H∞ controller design for RO system ·············································· 85 4.6.1 Control of uncertain RO system ······················································ 85 4.6.2 Robustness analysis and H∞ controller design ······································ 86 4.7 Simulation result and discussion··························································· 90 4.8 Conclusion ··················································································· 95 Chapter 5. Robust gain scheduling control of activated sludge process ······· 96 5.1 Introduction about activated sludge process ············································· 96 5.1.1 State variables ·········································································· 98 5.1.2 ASM1 processes ······································································ 100 5.1.3 The control problem of activated sludge process ································· 102 5.2 System modelling ········································································· 104 5.3 Model linearization ········································································ 107 5.4 Robust gain-schedule controller design for activated sludge process ··············· 109 5.5 Simulation result and discussion························································· 115 5.6 Conclusion ················································································· 120 Chapter 6. Observer-based loop-shaping control of anaerobic digestion ···· 121 6.1 Introduction ················································································ 121 6.1.1 Control problem in anaerobic digestion ··········································· 122 6.2 System modelling ········································································· 123 6.3 Controller design ·········································································· 124 6.3.1 H∞ loop-shaping controller ························································· 125 6.3.2 Coprime factor uncertainty ·························································· 126 6.3.3 Control synthesis ····································································· 127 6.4 Simulation result ··········································································· 131 6.5 Conclusion ················································································· 133 Chapter 7. Conclusion ··································································· 134 References ·················································································· 136 Appendices ················································································· 144Docto

Modeling and Control of Complex Physical Systems:The port-hamiltonian approach

Well structured reference book presenting the new paradigm of Port Hamiltionian Systems which has a large potential to be successful in tackling some of the big challenges in modern control theory and engineeringThe potential reference for many new developments taking place in modeling and controlExtend the readers knowledge and understanding of advanced modeling, analysis and control methods using the Port-Hamiltonian Systems paradigmProvides systematic methods for analysis and control, closely linked to the physics of the system. The power of these methods is demonstrated in various physical domain

Optimal control and robust estimation for ocean wave energy converters

This thesis deals with the optimal control of wave energy converters and some associated observer design problems. The first part of the thesis will investigate model predictive control of an ocean wave energy converter to maximize extracted power. A generic heaving converter that can have both linear dampers and active elements as a power take-off system is considered and an efficient optimal control algorithm is developed for use within a receding horizon control framework. The optimal control is also characterized analytically. A direct transcription of the optimal control problem is also considered as a general nonlinear program. A variation of the projected gradient optimization scheme is formulated and shown to be feasible and computationally inexpensive compared to a standard nonlinear program solver. Since the system model is bilinear and the cost function is not convex quadratic, the resulting optimization problem is shown not to be a quadratic program. Results are compared with other methods like optimal latching to demonstrate the improvement in absorbed power under irregular sea condition simulations. In the second part, robust estimation of the radiation forces and states inherent in the optimal control of wave energy converters is considered. Motivated by this, low order H∞ observer design for bilinear systems with input constraints is investigated and numerically tractable methods for design are developed. A bilinear Luenberger type observer is formulated and the resulting synthesis problem reformulated as that for a linear parameter varying system. A bilinear matrix inequality problem is then solved to find nominal and robust quadratically stable observers. The performance of these observers is compared with that of an extended Kalman filter. The robustness of the observers to parameter uncertainty and to variation in the radiation subsystem model order is also investigated. This thesis also explores the numerical integration of bilinear control systems with zero-order hold on the control inputs. Making use of exponential integrators, exact to high accuracy integration is proposed for such systems. New a priori bounds are derived on the computational complexity of integrating bilinear systems with a given error tolerance. Employing our new bounds on computational complexity, we propose a direct exponential integrator to solve bilinear ODEs via the solution of sparse linear systems of equations. Based on this, a novel sparse direct collocation of bilinear systems for optimal control is proposed. These integration schemes are also used within the indirect optimal control method discussed in the first part.Open Acces