156 research outputs found
Channel Estimation and Symbol Detection In Massive MIMO Systems Using Expectation Propagation
The advantages envisioned from using large antenna arrays have made massive multiple- input multiple-output systems (also known as massive MIMO) a promising technology for future wireless standards. Despite the advantages that massive MIMO systems provide, increasing the number of antennas introduces new technical challenges that need to be resolved. In particular, symbol detection is one of the key challenges in massive MIMO. Obtaining accurate channel state information (CSI) for the extremely large number of chan- nels involved is a difficult task and consumes significant resources. Therefore for Massive MIMO systems coherent detectors must be able to cope with highly imperfect CSI. More importantly, non-coherent schemes which do not rely on CSI for symbol detection become very attractive. Expectation propagation (EP) has been recently proposed as a low complexity algo- rithm for symbol detection in massive MIMO systems , where its performance is evaluated on the premise that perfect channel state information (CSI) is available at the receiver. However, in practical systems, exact CSI is not available due to a variety of reasons in- cluding channel estimation errors, quantization errors and aging. In this work we study the performance of EP in the presence of imperfect CSI due to channel estimation er- rors and show that in this case the EP detector experiences significant performance loss. Moreover, the EP detector shows a higher sensitivity to channel estimation errors in the high signal-to-noise ratio (SNR) regions where the rate of its performance improvement decreases. We investigate this behavior of the EP detector and propose a Modified EP detector for colored noise which utilizes the correlation matrix of the channel estimation error. Simulation results verify that the modified algorithm is robust against imperfect CSI and its performance is significantly improved over the EP algorithm, particularly in the higher SNR regions, and that for the modified detector, the slope of the symbol error rate (SER) vs. SNR plots are similar to the case of perfect CSI. Next, an algorithm based on expectation propagation is proposed for noncoherent symbol detection in large-scale SIMO systems. It is verified through simulation that in terms of SER, the proposed detector outperforms the pilotbased coherent MMSE detector for blocks as small as two symbols. This makes the proposed detector suitable for fast fading channels with very short coherence times. In addition, the SER performance of this detec- tor converges to that of the optimum ML receiver when the size of the blocks increases. Finally it is shown that for Rician fading channels, knowledge of the fading parameters is not required for achieving the SER gains. A channel estimation method was recently proposed for multi-cell massive MIMO sys- tems based on the eigenvalue decomposition of the correlation matrix of the received vectors (EVD-based). This algorithm, however, is sensitive to the size of the antenna array as well as the number of samples used in the evaluation of the correlation matrix. As the final work in this dissertation, we present a noncoherent channel estimation and symbol de- tection scheme for multi-cell massive MIMO systems based on expectation propagation. The proposed algorithm is initialized with the channel estimation result from the EVD- based method. Simulation results show that after a few iterations, the EP-based algorithm significantly outperforms the EVD-based method in both channel estimation and symbol error rate. Moreover, the EP-based algorithm is not sensitive to antenna array size or the inaccuracies of sample correlation matrix
On Low-Resolution ADCs in Practical 5G Millimeter-Wave Massive MIMO Systems
Nowadays, millimeter-wave (mmWave) massive multiple-input multiple-output
(MIMO) systems is a favorable candidate for the fifth generation (5G) cellular
systems. However, a key challenge is the high power consumption imposed by its
numerous radio frequency (RF) chains, which may be mitigated by opting for
low-resolution analog-to-digital converters (ADCs), whilst tolerating a
moderate performance loss. In this article, we discuss several important issues
based on the most recent research on mmWave massive MIMO systems relying on
low-resolution ADCs. We discuss the key transceiver design challenges including
channel estimation, signal detector, channel information feedback and transmit
precoding. Furthermore, we introduce a mixed-ADC architecture as an alternative
technique of improving the overall system performance. Finally, the associated
challenges and potential implementations of the practical 5G mmWave massive
MIMO system {with ADC quantizers} are discussed.Comment: to appear in IEEE Communications Magazin
A Belief Propagation Based Framework for Soft Multiple-Symbol Differential Detection
Soft noncoherent detection, which relies on calculating the \textit{a
posteriori} probabilities (APPs) of the bits transmitted with no channel
estimation, is imperative for achieving excellent detection performance in
high-dimensional wireless communications. In this paper, a high-performance
belief propagation (BP)-based soft multiple-symbol differential detection
(MSDD) framework, dubbed BP-MSDD, is proposed with its illustrative application
in differential space-time block-code (DSTBC)-aided ultra-wideband impulse
radio (UWB-IR) systems. Firstly, we revisit the signal sampling with the aid of
a trellis structure and decompose the trellis into multiple subtrellises.
Furthermore, we derive an APP calculation algorithm, in which the
forward-and-backward message passing mechanism of BP operates on the
subtrellises. The proposed BP-MSDD is capable of significantly outperforming
the conventional hard-decision MSDDs. However, the computational complexity of
the BP-MSDD increases exponentially with the number of MSDD trellis states. To
circumvent this excessive complexity for practical implementations, we
reformulate the BP-MSDD, and additionally propose a Viterbi algorithm
(VA)-based hard-decision MSDD (VA-HMSDD) and a VA-based soft-decision MSDD
(VA-SMSDD). Moreover, both the proposed BP-MSDD and VA-SMSDD can be exploited
in conjunction with soft channel decoding to obtain powerful iterative
detection and decoding based receivers. Simulation results demonstrate the
effectiveness of the proposed algorithms in DSTBC-aided UWB-IR systems.Comment: 14 pages, 12 figures, 3 tables, accepted to appear on IEEE
Transactions on Wireless Communications, Aug. 201
Massive MIMO for Internet of Things (IoT) Connectivity
Massive MIMO is considered to be one of the key technologies in the emerging
5G systems, but also a concept applicable to other wireless systems. Exploiting
the large number of degrees of freedom (DoFs) of massive MIMO essential for
achieving high spectral efficiency, high data rates and extreme spatial
multiplexing of densely distributed users. On the one hand, the benefits of
applying massive MIMO for broadband communication are well known and there has
been a large body of research on designing communication schemes to support
high rates. On the other hand, using massive MIMO for Internet-of-Things (IoT)
is still a developing topic, as IoT connectivity has requirements and
constraints that are significantly different from the broadband connections. In
this paper we investigate the applicability of massive MIMO to IoT
connectivity. Specifically, we treat the two generic types of IoT connections
envisioned in 5G: massive machine-type communication (mMTC) and ultra-reliable
low-latency communication (URLLC). This paper fills this important gap by
identifying the opportunities and challenges in exploiting massive MIMO for IoT
connectivity. We provide insights into the trade-offs that emerge when massive
MIMO is applied to mMTC or URLLC and present a number of suitable communication
schemes. The discussion continues to the questions of network slicing of the
wireless resources and the use of massive MIMO to simultaneously support IoT
connections with very heterogeneous requirements. The main conclusion is that
massive MIMO can bring benefits to the scenarios with IoT connectivity, but it
requires tight integration of the physical-layer techniques with the protocol
design.Comment: Submitted for publicatio
Design and Performance Analysis of Non-Coherent Detection Systems with Massive Receiver Arrays
Harvesting the gain of a large number of antennas in a mmWave band has mainly
been relying on the costly operation of channel state information (CSI)
acquisition and cumbersome phase shifters. Recent works have started to
investigate the possibility to use receivers based on energy detection (ED),
where a single data stream is decoded based on the channel and noise energy.
The asymptotic features of the massive receiver array lead to a system where
the impact of the noise becomes predictable due to a noise hardening effect.
This in effect extends the communication range compared to the receiver with a
small number of antennas, as the latter is limited by the unpredictability of
the additive noise. When the channel has a large number of spatial degrees of
freedom, the system becomes robust to imperfect channel knowledge due to
channel hardening. We propose two detection methods based on the instantaneous
and average channel energy, respectively. Meanwhile, we design the detection
thresholds based on the asymptotic properties of the received energy.
Differently from existing works, we analyze the scaling law behavior of the
symbol-error-rate (SER). When the instantaneous channel energy is known, the
performance of ED approaches that of the coherent detection in high SNR
scenarios. When the receiver relies on the average channel energy, our
performance analysis is based on the exact SER, rather than an approximation.
It is shown that the logarithm of SER decreases linearly as a function of the
number of antennas. Additionally, a saturation appears at high SNR for PAM
constellations of order larger than two, due to the uncertainty on the channel
energy. Simulation results show that ED, with a much lower complexity, achieves
promising performance both in Rayleigh fading channels and in sparse channels
Bilinear Expectation Propagation for Distributed Semi-Blind Joint Channel Estimation and Data Detection in Cell-Free Massive MIMO
We consider a cell-free massive multiple-input multiple-output (CF-MaMIMO)
communication system in the uplink transmission and propose a novel algorithm
for blind or semi-blind joint channel estimation and data detection (JCD). We
formulate the problem in the framework of bilinear inference and develop a
solution based on the expectation propagation (EP) method for both channel
estimation and data detection. We propose a new approximation of the joint a
posteriori distribution of the channel and data whose representation as a
factor graph enables the application of the EP approach using the
message-passing technique, local low-complexity computations at the nodes, and
an effective modeling of channel-data interplay. The derived algorithm, called
bilinear-EP JCD, allows for a distributed implementation among access points
(APs) and the central processing unit (CPU) and has polynomial complexity. Our
simulation results show that it outperforms other EP-based state-of-the-art
polynomial time algorithms.Comment: 10 pages, 4 figures, to be printed in IEEE Open Journal of Signal
Processin
On the MISO Channel with Feedback: Can Infinitely Massive Antennas Achieve Infinite Capacity?
We consider communication over a multiple-input single-output (MISO) block
fading channel in the presence of an independent noiseless feedback link. We
assume that the transmitter and receiver have no prior knowledge of the channel
state realizations, but the transmitter and receiver can acquire the channel
state information (CSIT/CSIR) via downlink training and feedback. For this
channel, we show that increasing the number of transmit antennas to infinity
will not achieve an infinite capacity, for a finite channel coherence length
and a finite input constraint on the second or fourth moment. This insight
follows from our new capacity bounds that hold for any linear and nonlinear
coding strategies, and any channel training schemes. In addition to the channel
capacity bounds, we also provide a characterization on the beamforming gain
that is also known as array gain or power gain, at the regime with a large
number of antennas.Comment: This work has been submitted to the IEEE Transactions on Information
Theory. It was presented in part at ISIT201
- …