Noise cancellation over spatial regions using adaptive wave domain processing

This paper proposes wave-domain adaptive processing for noise cancellation within a large spatial region. We use fundamental solutions of the Helmholtz wave-equation as basis functions to express the noise field over a spatial region and show the wave-domain processing directly on the decomposition coefficients to control the entire region. A feedback control system is implemented, where only a single microphone array is placed at the boundary of the control region to measure the residual signals, and a loudspeaker array is used to generate the anti-noise signals. We develop the adaptive wave-domain filtered-x least mean square algorithm. Simulation results show that using the proposed method the noise over the entire control region can be significantly reduced with fast convergence in both free-field and reverberant environmentsThanks to Australian Research Councils Discovery Projects funding scheme (project no. DP140103412). The work of J. Zhang was sponsored by the China Scholarship Council with the Australian National University

Sparse complex FxLMS for active noise cancellation over spatial regions

In this paper, we investigate active noise control over large 2D spatial regions when the noise source is sparsely distributed. The l1 relaxation technique originated from compressive sensing is adopted and based on that we develop the algorithm for two cases: multipoint noise cancellation and wave domain noise cancellation. This results in two new variants (i) zero-attracting multi-point complex FxLMS and (ii) zero-attracting wave domain complex FxLMS. Both approaches use a feedback control system, where a microphone array is distributed over the boundary of the control region to measure the residual noise signals and a loudspeaker array is placed outside the microphone array to generate the anti-noise signals. Simulation results demonstrate the performance and advantages of the proposed methods in terms of convergence rate and spatial noise reduction levels.This work is supported by Australian Research Council (ARC) Discovery Projects funding scheme (project no. DP140103412). The work of J. Zhang was sponsored by the China Scholarship Council with the Australian National University

Active Noise Control Over Space: A Wave Domain Approach

Noise control and cancellation over a spatial region is a fundamental problem in acoustic signal processing. In this paper, we utilize wave-domain adaptive algorithms to iteratively calculate the secondary source driving signals and to cancel the primary noise field over the control region. We propose wave-domain active noise control algorithms based on two minimization problems: first, minimizing the wave-domain residual signal coefficients, and second, minimizing the acoustic potential energy over the region, and derive the update equations with respect to two variables, the loudspeaker weights and wave-domain secondary source coefficients. Simulation results demonstrate the effectiveness of the proposed algorithms, more specifically the convergence speed and the noise cancellation performance in terms of the noise reduction level and acoustic potential energy reduction level over the entire spatial region.DP14010341

Spatial Noise-Field Control With Online Secondary Path Modeling: A Wave-Domain Approach

Due to strong interchannel interference in multichannel active noise control (ANC), there are fundamental problems associated with the filter adaptation and online secondary path modeling remains a major challenge. This paper proposes a wave-domain adaptation algorithm for multichannel ANC with online secondary path modelling to cancel tonal noise over an extended region of two-dimensional plane in a reverberant room. The design is based on exploiting the diagonal-dominance property of the secondary path in the wave domain. The proposed wave-domain secondary path model is applicable to both concentric and nonconcentric circular loudspeakers and microphone array placement, and is also robust against array positioning errors. Normalized least mean squares-type algorithms are adopted for adaptive feedback control. Computational complexity is analyzed and compared with the conventional time-domain and frequency-domain multichannel ANCs. Through simulation-based verification in comparison with existing methods, the proposed algorithm demonstrates more efficient adaptation with low-level auxiliary noise.DP14010341

Acoustic, psychophysical, and neuroimaging measurements of the effectiveness of active cancellation during auditory functional magnetic resonance imaging

Functional magnetic resonance imaging (fMRI) is one of the principal neuroimaging techniques for studying human audition, but it generates an intense background sound which hinders listening performance and confounds measures of the auditory response. This paper reports the perceptual effects of an active noise control (ANC) system that operates in the electromagnetically hostile and physically compact neuroimaging environment to provide significant noise reduction, without interfering with image quality. Cancellation was first evaluated at 600 Hz, corresponding to the dominant peak in the power spectrum of the background sound and at which cancellation is maximally effective. Microphone measurements at the ear demonstrated 35 dB of acoustic attenuation [from 93 to 58 dB sound pressure level (SPL)], while masked detection thresholds improved by 20 dB (from 74 to 54 dB SPL). Considerable perceptual benefits were also obtained across other frequencies, including those corresponding to dips in the spectrum of the background sound. Cancellation also improved the statistical detection of sound-related cortical activation, especially for sounds presented at low intensities. These results confirm that ANC offers substantial benefits for fMRI research

Robust Near-Field Adaptive Beamforming with Distance Discrimination

This paper proposes a robust near-field adaptive beamformer for microphone array applications in small rooms. Robustness against location errors is crucial for near-field adaptive beamforming due to the difficulty in estimating near-field signal locations especially the radial distances. A near-field regionally constrained adaptive beamformer is proposed to design a set of linear constraints by filtering on a low rank subspace of the near-field signal over a spatial region and frequency band such that the beamformer response over the designed spatial-temporal region can be accurately controlled by a small number of linear constraint vectors. The proposed constraint design method is a systematic approach which guarantees real arithmetic implementation and direct time domain algorithms for broadband beamforming. It improves the robustness against large errors in distance and directions of arrival, and achieves good distance discrimination simultaneously. We show with a nine-element uniform linear array that the proposed near-field adaptive beamformer is robust against distance errors as large as ±32% of the presumed radial distance and angle errors up to ±20⁰. It can suppress a far field interfering signal with the same angle of incidence as a near-field target by more than 20 dB with no loss of the array gain at the near-field target. The significant distance discrimination of the proposed near-field beamformer also helps to improve the dereverberation gain and reduce the desired signal cancellation in reverberant environments

Waveform Diversity and Range-Coupled Adaptive Radar Signal Processing

Waveform diversity may offer several benefits to radar systems though often at the cost of reduced sensitivity. Multi-dimensional processing schemes are known to offer many degrees of freedom, which can be exploited to suppress the ambiguity inherent to pulse compression, array processing, and Doppler frequency estimation. Spatial waveform diversity can be achieved by transmitting different but correlated waveforms from each element of an antenna array. A simple yet effective scheme is employed to transmit different waveforms in different spatial directions. A new reiterative minimum mean squared error approach entitled Space-Range Adaptive Processing, which adapts simultaneously in range and angle, is derived and shown in simulation to offer enhanced performance when spatial waveform diversity is employed relative to both conventional matched filtering and sequentially adapting in angle and then range. The same mathematical framework is utilized to develop Time-Range Adaptive Processing (TRAP) algorithm which is capable of simultaneously adapting in Doppler frequency and range. TRAP is useful when pulse-to-pulse changing of the center frequency or waveform coding is used to achieve enhanced range resolution or unambiguous ranging, respectively. The inherent computational complexity of the new multi-dimensional algorithms is addressed by segmenting the full-dimension cost functions, yielding a reduced-dimensional variants of each. Finally, a non-adaptive approach based on the multi-dimensional TRAP signal model is utilized to develop an efficient clutter cancellation technique capable of suppressing multiple range intervals of clutter when waveform diversity is applied to pulse-Doppler radar

Multistage adaptive noise cancellation and multi-dimensional signal processing for ultrasonic nondestructive evaluation

Ultrasonic signal processing presents several challenges with respect to both noise removal and interpretation. The interference of unwanted reflections from material grain structure can render the data extremely noisy and mask the detection of small flaws. It is therefore imperative to separate the flaw reflections from grain noise. The interpretation or classification of ultrasonic signals in general is relatively difficult due to the complexity of the physical process and similarity of signals from various classes of reflectors;Adaptive noise cancellation techniques are ideally suited for reducing spatially varying noise due to the grain structure of material in ultrasonic nondestructive evaluation. In this research, a multi-stage adaptive noise cancellation (MANC) scheme is proposed for reducing spatially varying grain noise and enhancing flaw detection in ultrasonic signals. The overall scheme is based on the use of an adaptive least mean square error (LMSE) filter with primary and reference signals derived from two adjacent positions of the transducers. Since grain noise is generally uncorrelated, in contrast to the correlated flaw echoes, adaptive filtering algorithms exploit the correlation properties of signals in a C-scan image to enhance the signal-to-noise ratio (SNR) of the output signal;A neural network-based signal classification system is proposed for the interpretation of ultrasonic signals obtained from inspection of welds, where signals have to be classified as resulting from porosity, slag, lack of fusion, or cracks in the weld region. Standard techniques rely on differences in individual A-scans to classify the signals. This thesis investigates the need for investigating signal features that incorporate the effects of beam spread and echo dynamics. Such effects call for data interpretation schemes that include a neighborhood of A-scans carrying information about a reflector. Several ultrasonic signal features based on the information in a two-dimensional array of ultrasonic waveforms, ranging from the estimation of statistical characteristics of signals to two and three-dimensional transform-based methods, are evaluated. A two-dimensional scan of ultrasonic testing is also represented in the form of images (B- and B\u27-scans). Multidimensional signal and image-processing algorithms are used to analyze the images. Two and three-dimensional Fourier transforms are applied to ultrasonic data that are inherently three-dimensional in nature (2 spatial and 1 time). A variety of transform-based features are then utilized for obtaining the final classification