Analysis of dynamic path loss based on the RSSI model for rupture location analysis in underground wireless sensor networks and its implications for Earthquake Early Warning System (EEWS)

Sensors deployed in underground tunnels found that radio frequency signals suffer significant signal strength attenuation which can result in considerable variation of link quality on the receiving end. This study analyzes the received signal strength index (RSSI) based on  the development of a theoretical wireless sensor model for  data  collection by  enabling  sensors  to  determine  the  location  from  which  each  data packet is obtained. To improve positioning accuracy, the complex radio wave propagation environment requires the use of a voronoi cell to minimize signal attenuation. A relatively simple calculation is used to predict the intensity and perception range of the received wireless signals to measure the extent of signal reduction in the attenuating rock medium. Simulation results show that RSSI-based localization and wireless network lifetime and throughput measurements are more accurate when the node concept is applied to the self-locating rupture zones than the maximum likelihood estimation method. The proposed minimum energy relay routing technique based on beacon node chain deployment is found to help correct localization errors resulting from interference caused by the underground tunnel environment. The extent of localization and power of the sensor nodes are determined based on the beacon node chain deployment of tunnel wireless sensor networks. The algorithm accounts for the distance and the corresponding RSSI between adjacent beacon nodes to calculate the actual path loss parameter in the tunnel. The proposed model can serve as the theoretical basis for locating ruptures in underground wireless sensor network nodes, thus maximizing the monitoring range of large scale tectonic environments while minimizing equipment cost. We recommend that this model can be field tested through a series of experiments by researchers and engineers working in seismology, telecommunication, and information technology.<br /

A survey of localization in wireless sensor network

Localization is one of the key techniques in wireless sensor network. The location estimation methods can be classified into target/source localization and node self-localization. In target localization, we mainly introduce the energy-based method. Then we investigate the node self-localization methods. Since the widespread adoption of the wireless sensor network, the localization methods are different in various applications. And there are several challenges in some special scenarios. In this paper, we present a comprehensive survey of these challenges: localization in non-line-of-sight, node selection criteria for localization in energy-constrained network, scheduling the sensor node to optimize the tradeoff between localization performance and energy consumption, cooperative node localization, and localization algorithm in heterogeneous network. Finally, we introduce the evaluation criteria for localization in wireless sensor network

Machine Learning in Wireless Sensor Networks: Algorithms, Strategies, and Applications

Wireless sensor networks monitor dynamic environments that change rapidly over time. This dynamic behavior is either caused by external factors or initiated by the system designers themselves. To adapt to such conditions, sensor networks often adopt machine learning techniques to eliminate the need for unnecessary redesign. Machine learning also inspires many practical solutions that maximize resource utilization and prolong the lifespan of the network. In this paper, we present an extensive literature review over the period 2002-2013 of machine learning methods that were used to address common issues in wireless sensor networks (WSNs). The advantages and disadvantages of each proposed algorithm are evaluated against the corresponding problem. We also provide a comparative guide to aid WSN designers in developing suitable machine learning solutions for their specific application challenges.Comment: Accepted for publication in IEEE Communications Surveys and Tutorial

RSSI-Based Self-Localization with Perturbed Anchor Positions

We consider the problem of self-localization by a resource-constrained mobile node given perturbed anchor position information and distance estimates from the anchor nodes. We consider normally-distributed noise in anchor position information. The distance estimates are based on the log-normal shadowing path-loss model for the RSSI measurements. The available solutions to this problem are based on complex and iterative optimization techniques such as semidefinite programming or second-order cone programming, which are not suitable for resource-constrained environments. In this paper, we propose a closed-form weighted least-squares solution. We calculate the weights by taking into account the statistical properties of the perturbations in both RSSI and anchor position information. We also estimate the bias of the proposed solution and subtract it from the proposed solution. We evaluate the performance of the proposed algorithm considering a set of arbitrary network topologies in comparison to an existing algorithm that is based on a similar approach but only accounts for perturbations in the RSSI measurements. We also compare the results with the corresponding Cramer-Rao lower bound. Our experimental evaluation shows that the proposed algorithm can substantially improve the localization performance in terms of both root mean square error and bias.Comment: Accepted for publication in 28th Annual IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (IEEE PIMRC 2017

Localisation of mobile nodes in wireless networks with correlated in time measurement noise.

Wireless sensor networks are an inherent part of decision making, object tracking and location awareness systems. This work is focused on simultaneous localisation of mobile nodes based on received signal strength indicators (RSSIs) with correlated in time measurement noises. Two approaches to deal with the correlated measurement noises are proposed in the framework of auxiliary particle filtering: with a noise augmented state vector and the second approach implements noise decorrelation. The performance of the two proposed multi model auxiliary particle filters (MM AUX-PFs) is validated over simulated and real RSSIs and high localisation accuracy is demonstrated