Human operator performance of remotely controlled tasks: Teleoperator research conducted at NASA's George C. Marshal Space Flight Center

The capabilities within the teleoperator laboratories to perform remote and teleoperated investigations for a wide variety of applications are described. Three major teleoperator issues are addressed: the human operator, the remote control and effecting subsystems, and the human/machine system performance results for specific teleoperated tasks

Aerospace Medicine and Biology. A continuing bibliography with indexes

This bibliography lists 244 reports, articles, and other documents introduced into the NASA scientific and technical information system in February 1981. Aerospace medicine and aerobiology topics are included. Listings for physiological factors, astronaut performance, control theory, artificial intelligence, and cybernetics are included

Redesigning the human-robot interface : intuitive teleoperation of anthropomorphic robots

textA novel interface for robotic teleoperation was developed to enable accurate and highly efficient teleoperation of the Industrial Reconfigurable Anthropomorphic Dual-arm (IRAD) system and other robotic systems. In order to achieve a revolutionary increase in operator productivity, the bilateral/master-slave approach must give way to shared autonomy and unilateral control; autonomy must be employed where possible, and appropriate sensory feedback only where autonomy is impossible; and today’s low-information/high feedback model must be replaced by one that emphasizes feedforward precision and minimal corrective feedback. This is emphasized for task spaces outside of the traditional anthropomorphic scale such as mobile manipulation (i.e. large task spaces) and high precision tasks (i.e. very small task spaces). The system is demonstrated using an anthropomorphically dimensioned industrial manipulator working in task spaces from one meter to less than one millimeter, in both simulation and hardware. This thesis discusses the design requirements and philosophy of this interface, provides a summary of prototype teleoperation hardware, simulation environment, test-bed hardware, and experimental results.Mechanical Engineerin

A demonstration and comparative analysis of haptic performance using a Gough-Stewart platform as a wearable haptic feedback device

In many hazardous work environments, contact tasks ranging from manufacturing to disassembly to emergency response are performed by industrial manipulators. Due to the hazardous and complex nature of these environments, teleoperation is often employed. When such is the case, the operator is left to interpret a large amount of data during task completion due to the complexity of modern robotic systems and the possible complexity of the tasks. This information is usually processed visually but can lead to sensory overload. To mitigate this, the information processing can also be distributed through other modes of sensory such as auditory or haptic. The University of Texas at Austin's TeMoto hands-free interface reduces the burden on the operator of commanding remote systems by enabling the use of gestural and verbal commands to complete a range of tasks, but the removal of a mechanical interactive device from the operator interface complicates the inclusion of haptic feedback. In this work, a standalone Gough-Stewart platform previously configured as a wearable haptic feedback device for the Nuclear and Applied Robotics Group at the University of Texas at Austin provides real-time haptic feedback to the unconstrained hand(s) of the operator. In doing so, this haptic interface can be employed with the intent of enhancing situational awareness and minimizing operator stress by imparting forces and torques to the user based on those imparted on the end-effector of the industrial manipulator. While multiple technical issues and human factor issues must be addressed, this effort focuses on integrating the system and evaluating its performance for various industrial manipulator designs and sensor modalities. After testing various digital signal processing techniques, functionality was demonstrated among one series-elastic and two rigid industrial manipulators, each with different force/torque data acquisition characteristics and a comparative analysis in haptic performance was performed. Furthermore, it was demonstrated with the TeMoto hands-free teleoperation system. Overall, the demonstrations and experiments performed in this work prove the system to be a viable, hardware agnostic means of haptic feedback and a strong basis for future effortsMechanical Engineerin

Adaptive physical human-robot interaction (PHRI) with a robotic nursing assistant.

Recently, more and more robots are being investigated for future applications in health-care. For instance, in nursing assistance, seamless Human-Robot Interaction (HRI) is very important for sharing workspaces and workloads between medical staff, patients, and robots. In this thesis we introduce a novel robot - the Adaptive Robot Nursing Assistant (ARNA) and its underlying components. ARNA has been designed specifically to assist nurses with day-to-day tasks such as walking patients, pick-and-place item retrieval, and routine patient health monitoring. An adaptive HRI in nursing applications creates a positive user experience, increase nurse productivity and task completion rates, as reported by experimentation with human subjects. ARNA has been designed to include interface devices such as tablets, force sensors, pressure-sensitive robot skins, LIDAR and RGBD camera. These interfaces are combined with adaptive controllers and estimators within a proposed framework that contains multiple innovations. A research study was conducted on methods of deploying an ideal HumanMachine Interface (HMI), in this case a tablet-based interface. Initial study points to the fact that a traded control level of autonomy is ideal for tele-operating ARNA by a patient. The proposed method of using the HMI devices makes the performance of a robot similar for both skilled and un-skilled workers. A neuro-adaptive controller (NAC), which contains several neural-networks to estimate and compensate for system non-linearities, was implemented on the ARNA robot. By linearizing the system, a cross-over usability condition is met through which humans find it more intuitive to learn to use the robot in any location of its workspace, A novel Base-Sensor Assisted Physical Interaction (BAPI) controller is introduced in this thesis, which utilizes a force-torque sensor at the base of the ARNA robot manipulator to detect full body collisions, and make interaction safer. Finally, a human-intent estimator (HIE) is proposed to estimate human intent while the robot and user are physically collaborating during certain tasks such as adaptive walking. A NAC with HIE module was validated on a PR2 robot through user studies. Its implementation on the ARNA robot platform can be easily accomplished as the controller is model-free and can learn robot dynamics online. A new framework, Directive Observer and Lead Assistant (DOLA), is proposed for ARNA which enables the user to interact with the robot in two modes: physically, by direct push-guiding, and remotely, through a tablet interface. In both cases, the human is being “observed” by the robot, then guided and/or advised during interaction. If the user has trouble completing the given tasks, the robot adapts their repertoire to lead users toward completing goals. The proposed framework incorporates interface devices as well as adaptive control systems in order to facilitate a higher performance interaction between the user and the robot than was previously possible. The ARNA robot was deployed and tested in a hospital environment at the School of Nursing of the University of Louisville. The user-experience tests were conducted with the help of healthcare professionals where several metrics including completion time, rate and level of user satisfaction were collected to shed light on the performance of various components of the proposed framework. The results indicate an overall positive response towards the use of such assistive robot in the healthcare environment. The analysis of these gathered data is included in this document. To summarize, this research study makes the following contributions: Conducting user experience studies with the ARNA robot in patient sitter and walker scenarios to evaluate both physical and non-physical human-machine interfaces. Evaluation and Validation of Human Intent Estimator (HIE) and Neuro-Adaptive Controller (NAC). Proposing the novel Base-Sensor Assisted Physical Interaction (BAPI) controller. Building simulation models for packaged tactile sensors and validating the models with experimental data. Description of Directive Observer and Lead Assistance (DOLA) framework for ARNA using adaptive interfaces

NASA space station automation: AI-based technology review

Research and Development projects in automation for the Space Station are discussed. Artificial Intelligence (AI) based automation technologies are planned to enhance crew safety through reduced need for EVA, increase crew productivity through the reduction of routine operations, increase space station autonomy, and augment space station capability through the use of teleoperation and robotics. AI technology will also be developed for the servicing of satellites at the Space Station, system monitoring and diagnosis, space manufacturing, and the assembly of large space structures

Proceedings of the NASA Conference on Space Telerobotics, volume 2

These proceedings contain papers presented at the NASA Conference on Space Telerobotics held in Pasadena, January 31 to February 2, 1989. The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research