Decentralized Output Sliding-Mode Fault-Tolerant Control for Heterogeneous Multiagent Systems

This paper proposes a novel decentralized output sliding-mode fault-tolerant control (FTC) design for heterogeneous multiagent systems (MASs) with matched disturbances, unmatched nonlinear interactions, and actuator faults. The respective iteration and iteration-free algorithms in the sliding-mode FTC scheme are designed with adaptive upper bounding laws to automatically compensate the matched and unmatched components. Then, a continuous fault-tolerant protocol in the observer-based integral sliding-mode design is developed to guarantee the asymptotic stability of MASs and the ultimate boundedness of the estimation errors. Simulation results validate the efficiency of the proposed FTC algorithm

Robust fault tolerant control of induction motor system

Research into fault tolerant control (FTC, a set of techniques that are developed to increase plant availability and reduce the risk of safety hazards) for induction motors is motivated by practical concerns including the need for enhanced reliability, improved maintenance operations and reduced cost. Its aim is to prevent that simple faults develop into serious failure. Although, the subject of induction motor control is well known, the main topics in the literature are concerned with scalar and vector control and structural stability. However, induction machines experience various fault scenarios and to meet the above requirements FTC strategies based on existing or more advanced control methods become desirable. Some earlier studies on FTC have addressed particular problems of 3-phase sensor current/voltage FTC, torque FTC, etc. However, the development of these methods lacks a more general understanding of the overall problem of FTC for an induction motor based on a true fault classification of possible fault types.In order to develop a more general approach to FTC for induction motors, i.e. not just designing specific control approaches for individual induction motor fault scenarios, this thesis has carried out a systematic research on induction motor systems considering the various faults that can typically be present, having either “additive” fault or “multiplicative” effects on the system dynamics, according to whether the faults are sensor or actuator (additive fault) types or component or motor faults (multiplicative fault) types.To achieve the required objectives, an active approach to FTC is used, making use of fault estimation (FE, an approach that determine the magnitude of a fault signal online) and fault compensation. This approach of FTC/FE considers an integration of the electrical and mechanical dynamics, initially using adaptive and/or sliding mode observers, Linear Parameter Varying (LPV, in which nonlinear systems are locally decomposed into several linear systems scheduled by varying parameters) and then using back-stepping control combined with observer/estimation methods for handling certain forms of nonlinearity.In conclusion, the thesis proposed an integrated research of induction motor FTC/FE with the consideration of different types of faults and different types of uncertainties, and validated the approaches through simulations and experiments

Decentralized sliding mode control and estimation for large-scale systems

This thesis concerns the development of an approach of decentralised robust control and estimation for large scale systems (LSSs) using robust sliding mode control (SMC) and sliding mode observers (SMO) theory based on a linear matrix inequality (LMI) approach. A complete theory of decentralized first order sliding mode theory is developed. The main developments proposed in this thesis are: The novel development of an LMI approach to decentralized state feedback SMC. The proposed strategy has good ability in combination with other robust methods to fulfill specific performance and robustness requirements. The development of output based SMC for large scale systems (LSSs). Three types of novel decentralized output feedback SMC methods have been developed using LMI design tools. In contrast to more conventional approaches to SMC design the use of some complicated transformations have been obviated. A decentralized approach to SMO theory has been developed focused on the Walcott-Żak SMO combined with LMI tools. A derivation for bounds applicable to the estimation error for decentralized systems has been given that involves unknown subsystem interactions and modeling uncertainty. Strategies for both actuator and sensor fault estimation using decentralized SMO are discussed.The thesis also provides a case study of the SMC and SMO concepts applied to a non-linear annealing furnace system modelderived from a distributed parameter (partial differential equation) thermal system. The study commences with a lumped system decentralised representation of the furnace derived from the partial differential equations. The SMO and SMC methods derived in the thesis are applied to this lumped parameter furnace model. Results are given demonstrating the validity of the methods proposed and showing a good potential for a valuable practical implementation of fault tolerant control based on furnace temperature sensor faults

On-line estimation approaches to fault-tolerant control of uncertain systems

This thesis is concerned with fault estimation in Fault-Tolerant Control (FTC) and as such involves the joint problem of on-line estimation within an adaptive control system. The faults that are considered are significant uncertainties affecting the control variables of the process and their estimates are used in an adaptive control compensation mechanism. The approach taken involves the active FTC, as the faults can be considered as uncertainties affecting the control system. The engineering (application domain) challenges that are addressed are: (1) On-line model-based fault estimation and compensation as an FTC problem, for systems with large but bounded fault magnitudes and for which the faults can be considered as a special form of dynamic uncertainty. (2) Fault-tolerance in the distributed control of uncertain inter-connected systems The thesis also describes how challenge (1) can be used in the distributed control problem of challenge (2). The basic principle adopted throughout the work is that the controller has two components, one involving the nominal control action and the second acting as an adaptive compensation for significant uncertainties and fault effects. The fault effects are a form of uncertainty which is considered too large for the application of passive FTC methods. The thesis considers several approaches to robust control and estimation: augmented state observer (ASO); sliding mode control (SMC); sliding mode fault estimation via Sliding Mode Observer (SMO); linear parameter-varying (LPV) control; two-level distributed control with learning coordination

Robust model-based fault estimation and fault-tolerant control : towards an integration

To maintain robustly acceptable system performance, fault estimation (FE) is adopted to reconstruct fault signals and a fault-tolerant control (FTC) controller is employed to compensate for the fault effects. The inevitably existing system and estimation uncertainties result in the so-called bi-directional robustness interactions defined in this work between the FE and FTC functions, which gives rise to an important and challenging yet open integrated FE/FTC design problem concerned in this thesis. An example of fault-tolerant wind turbine pitch control is provided as a practical motivation for integrated FE/FTC design.To achieve the integrated FE/FTC design for linear systems, two strategies are proposed. A H∞ optimization based approach is first proposed for linear systems with differentiable matched faults, using augmented state unknown input observer FE and adaptive sliding mode FTC. The integrated design is converted into an observer-based robust control problem solved via a single-step linear matrix inequality formulation.With the purpose of an integrated design with more freedom and also applicable for a range of general fault scenarios, a decoupling approach is further proposed. This approach can estimate and compensate unmatched non-differentiable faults and perturbations by combined adaptive sliding mode augmented state unknown input observer and backstepping FTC controller. The observer structure renders a recovery of the Separation Principle and allows great freedom for the FE/FTC designs.Integrated FE/FTC design strategies are also developed for Takagi-Sugeno fuzzy modelling nonlinear systems, Lipschitz nonlinear systems, and large-scale interconnected systems, based on extensions of the H∞ optimization approach for linear systems.Tutorial examples are used to illustrate the design strategies for each approach. Physical systems, a 3-DOF (degree-of-freedom) helicopter and a 3-machine power system, are used to provide further evaluation of the proposed integrated FE/FTC strategies. Future research on this subject is also outlined

A new strategy for integration of fault estimation within fault-tolerant control

© 2016 Elsevier Ltd. All rights reserved. The problem of active fault tolerant control (FTC) of dynamical systems involves the process of fault detection and isolation/fault estimation (FDI/FE) used to either make a decision as to when and how to change the control, based on FDI or to compensate the fault in the control system via FE. The combination of the decision-making/estimation and control gives rise to a bi-directional uncertainty in which the modelling and fault uncertainties and disturbances all affect the quality and robustness of the FTC system. This leads to the FTC requirement for an integrated design of the FDI/FE and control system reconfiguration. This paper focuses on the FTC approach using FE and fault compensation within the control system in which the design is achieved by integrating together the FE and FTC controller modules. The FE is based on a modified reduced-/full-order unknown input observer and the FTC system is constructed by sliding mode control using state/output feedback. The integrated design is converted into an observer-based robust control problem solved via H ∞ optimization with a single-step LMI formulation. The performance effectiveness of the proposed integrated design approach is illustrated through studying the control of an uncertain model of a DC motor

Fault-tolerant control strategies for a class of Euler-Lagrange nonlinear systems subject to simultaneous sensor and actuator faults

The problem of Fault Detection, Isolation, and Estimation (FDIE) as well as Fault-Tolerant Control (FTC) for a class of nonlinear systems modeled with Euler-Lagrange (EL) equations subjected to simultaneous sensor and actuator faults are considered in this study. To tackle this problem, first state and output linear transformations are introduced to decouple the effects of sensor and actuator faults. These transformations do not depend on the system nonlinearities. An analytical procedure based on two Linear Matrix Inequality (LMI) feasibility conditions is proposed to obtain these transformations. Once, the effects of faults are decoupled, two Sliding Mode Observers (SMO) are designed to reconstruct each type of fault, separately. Subsequently, the results of fault estimations are fed back to the controller and the effects of faults are compensated for. In this study, the mathematical stability proof of the coupled controller, observers, and the nonlinear system is provided. Unlike previous methodologies in the literature, no limiting assumptions such as Lipschitz conditions are imposed on the system. Next, a novel fault tolerant control scheme is proposed in which a single SMO is used to reconstruct sensor faults and provide a compensation term to rectify the effects of faults. However, to deal with actuator faults, a Sliding Mode Controller (SMC) is employed. Using this robust FTC technique, zero tracking error in the presence of uncertainties, measurement noise, disturbances, and faults as well as estimation of the actuator faults are possible. The stability proof for the coupled nonlinear controller, observer and plant is provided by using the properties of Euler-Lagrange equations and sliding mode techniques. Finally, to evaluate the performance of the proposed FDIE and FTC approaches, extensive sets of simulations are performed on a 3 Degrees Of Freedom (DOF) Autonomous Underwater Vehicle (AUV). Simulation studies show the promising results obtained as a result of the presented approaches as compared to those obtained by using the existing methodologies

Adaptive sliding mode fault-tolerant attitude control for flexible satellites based on T-S fuzzy disturbance modeling

This paper investigates the fault tolerance problem of flexible satellites subject to actuator faults and multiple disturbances. An adaptive sliding mode fault tolerant control (ASMFTC) approach based on Takagi-Sugeno (T-S) fuzzy disturbance observer (TSFDO) is presented for attitude control system (ACS) under loss of actuator effectiveness, environmental disturbance torque and elastic modal generated by flexible appendages. Compared with the traditional disturbance observer based control (DOBC) methods, the T-S fuzzy technology is applied to estimate the unknown nonlinear elastic modal. Then, the energy bounded disturbance is eliminated by designing an adaptive sliding mode controller. The proposed ASMFTC design can guarantee the sliding surface to approach zero. Finally, the effectiveness of the control method proposed in this paper is further verified by comparative simulation

New developments in mathematical control and information for fuzzy systems

Hamid Reza Karimi, Mohammed Chadli and Peng Sh