An approach to generating two zones of silence with application to personal sound systems

An application of current interest in sound reproduction systems is the creation of multizone sound fields which produce multiple independent sound fields for multiple listeners. The challenge in producing such sound fields is the avoidance of interference between sound zones, which is dependent on the geometry of the zone and the direction of arrival of the desired sound fields. This paper provides a theoretical basis for the generation of two zones based on the creation of sound fields with nulls and the positioning of those nulls at arbitrary positions. The nulls are created by suppressing low-order mode terms in the sound field expansion. Simulations are presented for the two-dimensional case which shows that suppression of interference is possible across a broad frequency audio range

Spatial Multizone Soundfield Reproduction Design

It is desirable for people sharing a physical space to access different multimedia information streams simultaneously. For a good user experience, the interference of the different streams should be held to a minimum. This is straightforward for the video component but currently difficult for the audio sound component. Spatial multizone soundfield reproduction, which aims to provide an individual sound environment to each of a set of listeners without the use of physical isolation or headphones, has drawn significant attention of researchers in recent years. The realization of multizone soundfield reproduction is a conceptually challenging problem as currently most of the soundfield reproduction techniques concentrate on a single zone. This thesis considers the theory and design of a multizone soundfield reproduction system using arrays of loudspeakers in given complex environments. We first introduce a novel method for spatial multizone soundfield reproduction based on describing the desired multizone soundfield as an orthogonal expansion of formulated basis functions over the desired reproduction region. This provides the theoretical basis of both 2-D (height invariant) and 3-D soundfield reproduction for this work. We then extend the reproduction of the multizone soundfield over the desired region to reverberant environments, which is based on the identification of the acoustic transfer function (ATF) from the loudspeaker over the desired reproduction region using sparse methods. The simulation results confirm that the method leads to a significantly reduced number of required microphones for an accurate multizone sound reproduction compared with the state of the art, while it also facilitates the reproduction over a wide frequency range. In addition, we focus on the improvements of the proposed multizone reproduction system with regard to practical implementation. The so-called 2.5D multizone oundfield reproduction is considered to accurately reproduce the desired multizone soundfield over a selected 2-D plane at the height approximately level with the listener’s ears using a single array of loudspeakers with 3-D reverberant settings. Then, we propose an adaptive reverberation cancelation method for the multizone soundfield reproduction within the desired region and simplify the prior soundfield measurement process. Simulation results suggest that the proposed method provides a faster convergence rate than the comparative approaches under the same hardware provision. Finally, we conduct the real-world implementation based on the proposed theoretical work. The experimental results show that we can achieve a very noticeable acoustic energy contrast between the signals recorded in the bright zone and the quiet zone, especially for the system implementation with reverberation equalization

Multizone wideband sound field reproduction

This thesis deals with the problem of multizone wideband sound field reproduction using an array of loudspeakers. A pressure matching approach is researched to control the sound field within the zones through the calculation of loudspeaker weights. The loudspeaker weights are computed first using a regularized least-squares (LS) approach and then a least-absolute shrinkage and selection operator (Lasso). It is demonstrated that the single-stage LS technique outperforms the single-stage Lasso in multizone wideband sound field reproduction, while the single-stage Lasso enables the judicious placement of loudspeakers. To improve the multizone sound reproduction performance of wideband sources using a limited number of loudspeakers, it is assumed that the virtual sources are fixed in positions. A new two-stage Lasso-LS pressure matching approach is then proposed to optimize both the loudspeaker locations and weights. In the first stage, a Lasso algorithm is used to select the loudspeakers' positions for all sources and frequency bands. A second stage then optimizes reproduction using all selected loudspeakers on the basis of a regularized LS algorithm. The results show that a horizontal array of limited number of loudspeakers (e.g. 52) can be used to effectively create personal audio spaces for multiple users of variable heights. The proposed method is then extended to a nested Lasso-LS method which employs harmonic nested arrays in the first stage Lasso to reduce the computational complexity. Effectively, the nested arrays provide a priori knowledge of prospective loudspeaker locations based on the frequency bands of interest. The final loudspeaker locations and weightings are then estimated during the two-stage Lasso-LS optimization

Optimizing Source and Sensor Placement for Sound Field Control: An Overview

International audienceIn order to control an acoustic field inside a target region, it is important to choose suitable positions of secondary sources (loudspeakers) and sensors (control points/microphones). This paper provides an overview of state-of-the-art source and sensor placement methods in sound field control. Although the placement of both sources and sensors greatly affects control accuracy and filter stability, their joint optimization has not been thoroughly investigated in the acoustics literature. In this context, we reformulate five general source and/or sensor placement methods that can be applied for sound field control. We compare the performance of these methods through extensive numerical simulations in both narrowband and broadband scenarios. Index Terms-source and sensor placement, sound field control , sound field reproduction, subset selection, interpolation

Proceedings of the EAA Spatial Audio Signal Processing symposium: SASP 2019

International audienc

Multizone 2D Soundfield Reproduction via Spatial Band Stop Filters

Any attempt to create multiple independent soundfields in separate zones over an extended region of open space results in unintended interference in a given zones from other zones. In this paper, we design spatial band stop filters to suppress interzone interference in the regions of interests and pass the desired soundfields with no distortion. This is achieved by using the higher order spatial harmonics of one zone to cancel the undesirable effects of the lower order harmonics of the same zone on the other zones. We illustrate the work by designing and simulating a 2D two-zone soundfield