Analog layout design automation: ILP-based analog routers

The shrinking design window and high parasitic sensitivity in the advanced technology have imposed special challenges on the analog and radio frequency (RF) integrated circuit design. In this thesis, we propose a new methodology to address such a deficiency based on integer linear programming (ILP) but without compromising the capability of handling any special constraints for the analog routing problems. Distinct from the conventional methods, our algorithm utilizes adaptive resolutions for various routing regions. For a more congested region, a routing grid with higher resolution is employed, whereas a lower-resolution grid is adopted to a less crowded routing region. Moreover, we strengthen its speciality in handling interconnect width control so as to route the electrical nets based on analog constraints while considering proper interconnect width to address the acute interconnect parasitics, mismatch minimization, and electromigration effects simultaneously. In addition, to tackle the performance degradation due to layout dependent effects (LDEs) and take advantage of optical proximity correction (OPC) for resolution enhancement of subwavelength lithography, in this thesis we have also proposed an innovative LDE-aware analog layout migration scheme, which is equipped with our special routing methodology. The LDE constraints are first identified with aid of a special sensitivity analysis and then satisfied during the layout migration process. Afterwards the electrical nets are routed by an extended OPC-inclusive ILP-based analog router to improve the final layout image fidelity while the routability and analog constraints are respected in the meantime. The experimental results demonstrate the effectiveness and efficiency of our proposed methods in terms of both circuit performance and image quality compared to the previous works

Advanced analog layout design automation in compliance with density uniformity

To fabricate a reliable integrated circuit chip, foundries follow specific design rules and layout processing techniques. One of the parameters, which affect circuit performance and final electronic product quality, is the variation of thickness for each semiconductor layer within the fabricated chips. The thickness is closely dependent on the density of geometric features on that layer. Therefore, to ensure consistent thickness, foundries normally have to seriously control distribution of the feature density on each layer by using post-processing operations. In this research, the methods of controlling feature density distribution on different layers of an analog layout during the process of layout migration from an old technology to a new one or updated design specifications in the same technology have been investigated. We aim to achieve density-uniformity-aware layout retargeting for facilitating manufacturing process in the advanced technologies. This can offer an advantage right to the design stage for the designers to evaluate the effects of applying density uniformity to their drafted layouts, which are otherwise usually done by the foundries at the final manufacturing stage without considering circuit performance. Layout modification for density uniformity includes component position change and size modification, which may induce crosstalk noise caused by extra parasitic capacitance. To effectively control this effect, we have also investigated and proposed a simple yet accurate analytic method to model the parasitic capacitance on multi-layer VLSI chips. Supported by this capacitance modeling research, a unique methodology to deal with density-uniformity-aware analog layout retargeting with the capability of parasitic capacitance control has been presented. The proposed operations include layout geometry position rearrangement, interconnect size modification, and extra dummy fill insertion for enhancing layout density uniformity. All of these operations are holistically coordinated by a linear programming optimization scheme. The experimental results demonstrate the efficacy of the proposed methodology compared to the popular digital solutions in terms of minimum density variation and acute parasitic capacitance control

Integrated Circuits Parasitic Capacitance Extraction Using Machine Learning and its Application to Layout Optimization

The impact of parasitic elements on the overall circuit performance keeps increasing from one technology generation to the next. In advanced process nodes, the parasitic effects dominate the overall circuit performance. As a result, the accuracy requirements of parasitic extraction processes significantly increased, especially for parasitic capacitance extraction. Existing parasitic capacitance extraction tools face many challenges to cope with such new accuracy requirements that are set by semiconductor foundries (\u3c 5% error). Although field-solver methods can meet such requirements, they are very slow and have a limited capacity. The other alternative is the rule-based parasitic capacitance extraction methods, which are faster and have a high capacity; however, they cannot consistently provide good accuracy as they use a pre-characterized library of capacitance formulas that cover a limited number of layout patterns. On the other hand, the new parasitic extraction accuracy requirements also added more challenges on existing parasitic-aware routing optimization methods, where simplified parasitic models are used to optimize layouts. This dissertation provides new solutions for interconnect parasitic capacitance extraction and parasitic-aware routing optimization methodologies in order to cope with the new accuracy requirements of advanced process nodes as follows. First, machine learning compact models are developed in rule-based extractors to predict parasitic capacitances of cross-section layout patterns efficiently. The developed models mitigate the problems of the pre-characterized library approach, where each compact model is designed to extract parasitic capacitances of cross-sections of arbitrary distributed metal polygons that belong to a specific set of metal layers (i.e., layer combination) efficiently. Therefore, the number of covered layout patterns significantly increased. Second, machine learning compact models are developed to predict parasitic capacitances of middle-end-of-line (MEOL) layers around FINFETs and MOSFETs. Each compact model extracts parasitic capacitances of 3D MEOL patterns of a specific device type regardless of its metal polygons distribution. Therefore, the developed MEOL models can replace field-solvers in extracting MEOL patterns. Third, a novel accuracy-based hybrid parasitic capacitance extraction method is developed. The proposed hybrid flow divides a layout into windows and extracts the parasitic capacitances of each window using one of three parasitic capacitance extraction methods that include: 1) rule-based; 2) novel deep-neural-networks-based; and 3) field-solver methods. This hybrid methodology uses neural-networks classifiers to determine an appropriate extraction method for each window. Moreover, as an intermediate parasitic capacitance extraction method between rule-based and field-solver methods, a novel deep-neural-networks-based extraction method is developed. This intermediate level of accuracy and speed is needed since using only rule-based and field-solver methods (for hybrid extraction) results in using field-solver most of the time for any required high accuracy extraction. Eventually, a parasitic-aware layout routing optimization and analysis methodology is implemented based on an incremental parasitic extraction and a fast optimization methodology. Unlike existing flows that do not provide a mechanism to analyze the impact of modifying layout geometries on a circuit performance, the proposed methodology provides novel sensitivity circuit models to analyze the integrity of signals in layout routes. Such circuit models are based on an accurate matrix circuit representation, a cost function, and an accurate parasitic sensitivity extraction. The circuit models identify critical parasitic elements along with the corresponding layout geometries in a certain route, where they measure the sensitivity of a route’s performance to corresponding layout geometries very fast. Moreover, the proposed methodology uses a nonlinear programming technique to optimize problematic routes with pre-determined degrees of freedom using the proposed circuit models. Furthermore, it uses a novel incremental parasitic extraction method to extract parasitic elements of modified geometries efficiently, where the incremental extraction is used as a part of the routing optimization process to improve the optimization runtime and increase the optimization accuracy

Layoutautomatisierung im analogen IC-Entwurf mit formalisiertem und nicht-formalisiertem Expertenwissen

After more than three decades of electronic design automation, most layouts for analog integrated circuits are still handcrafted in a laborious manual fashion today. Obverse to the highly automated synthesis tools in the digital domain (coping with the quantitative difficulty of packing more and more components onto a single chip – a desire well known as More Moore), analog layout automation struggles with the many diverse and heavily correlated functional requirements that turn the analog design problem into a More than Moore challenge. Facing this qualitative complexity, seasoned layout engineers rely on their comprehensive expert knowledge to consider all design constraints that uncompromisingly need to be satisfied. This usually involves both formally specified and nonformally communicated pieces of expert knowledge, which entails an explicit and implicit consideration of design constraints, respectively. Existing automation approaches can be basically divided into optimization algorithms (where constraint consideration occurs explicitly) and procedural generators (where constraints can only be taken into account implicitly). As investigated in this thesis, these two automation strategies follow two fundamentally different paradigms denoted as top-down automation and bottom-up automation. The major trait of top-down automation is that it requires a thorough formalization of the problem to enable a self-intelligent solution finding, whereas a bottom-up automatism –controlled by parameters– merely reproduces solutions that have been preconceived by a layout expert in advance. Since the strengths of one paradigm may compensate the weaknesses of the other, it is assumed that a combination of both paradigms –called bottom-up meets top-down– has much more potential to tackle the analog design problem in its entirety than either optimization-based or generator-based approaches alone. Against this background, the thesis at hand presents Self-organized Wiring and Arrangement of Responsive Modules (SWARM), an interdisciplinary methodology addressing the design problem with a decentralized multi-agent system. Its basic principle, similar to the roundup of a sheep herd, is to let responsive mobile layout modules (implemented as context-aware procedural generators) interact with each other inside a user-defined layout zone. Each module is allowed to autonomously move, rotate and deform itself, while a supervising control organ successively tightens the layout zone to steer the interaction towards increasingly compact (and constraint compliant) layout arrangements. Considering various principles of self-organization and incorporating ideas from existing decentralized systems, SWARM is able to evoke the phenomenon of emergence: although each module only has a limited viewpoint and selfishly pursues its personal objectives, remarkable overall solutions can emerge on the global scale. Several examples exhibit this emergent behavior in SWARM, and it is particularly interesting that even optimal solutions can arise from the module interaction. Further examples demonstrate SWARM’s suitability for floorplanning purposes and its application to practical place-and-route problems. The latter illustrates how the interacting modules take care of their respective design requirements implicitly (i.e., bottom-up) while simultaneously paying respect to high level constraints (such as the layout outline imposed top-down by the supervising control organ). Experimental results show that SWARM can outperform optimization algorithms and procedural generators both in terms of layout quality and design productivity. From an academic point of view, SWARM’s grand achievement is to tap fertile virgin soil for future works on novel bottom-up meets top-down automatisms. These may one day be the key to close the automation gap in analog layout design.Nach mehr als drei Jahrzehnten Entwurfsautomatisierung werden die meisten Layouts für analoge integrierte Schaltkreise heute immer noch in aufwändiger Handarbeit entworfen. Gegenüber den hochautomatisierten Synthesewerkzeugen im Digitalbereich (die sich mit dem quantitativen Problem auseinandersetzen, mehr und mehr Komponenten auf einem einzelnen Chip unterzubringen – bestens bekannt als More Moore) kämpft die analoge Layoutautomatisierung mit den vielen verschiedenen und stark korrelierten funktionalen Anforderungen, die das analoge Entwurfsproblem zu einer More than Moore Herausforderung machen. Angesichts dieser qualitativen Komplexität bedarf es des umfassenden Expertenwissens erfahrener Layouter um sämtliche Entwurfsconstraints, die zwingend eingehalten werden müssen, zu berücksichtigen. Meist beinhaltet dies formal spezifiziertes als auch nicht-formal übermitteltes Expertenwissen, was eine explizite bzw. implizite Constraint Berücksichtigung nach sich zieht. Existierende Automatisierungsansätze können grundsätzlich unterteilt werden in Optimierungsalgorithmen (wo die Constraint Berücksichtigung explizit erfolgt) und prozedurale Generatoren (die Constraints nur implizit berücksichtigen können). Wie in dieser Arbeit eruiert wird, folgen diese beiden Automatisierungsstrategien zwei grundlegend unterschiedlichen Paradigmen, bezeichnet als top-down Automatisierung und bottom-up Automatisierung. Wesentliches Merkmal der top-down Automatisierung ist die Notwendigkeit einer umfassenden Problemformalisierung um eine eigenintelligente Lösungsfindung zu ermöglichen, während ein bottom-up Automatismus –parametergesteuert– lediglich Lösungen reproduziert, die vorab von einem Layoutexperten vorgedacht wurden. Da die Stärken des einen Paradigmas die Schwächen des anderen ausgleichen können, ist anzunehmen, dass eine Kombination beider Paradigmen –genannt bottom-up meets top down– weitaus mehr Potenzial hat, das analoge Entwurfsproblem in seiner Gesamtheit zu lösen als optimierungsbasierte oder generatorbasierte Ansätze für sich allein. Vor diesem Hintergrund stellt die vorliegende Arbeit Self-organized Wiring and Arrangement of Responsive Modules (SWARM) vor, eine interdisziplinäre Methodik, die das Entwurfsproblem mit einem dezentralisierten Multi-Agenten-System angeht. Das Grundprinzip besteht darin, ähnlich dem Zusammentreiben einer Schafherde, reaktionsfähige mobile Layoutmodule (realisiert als kontextbewusste prozedurale Generatoren) in einer benutzerdefinierten Layoutzone interagieren zu lassen. Jedes Modul darf sich selbständig bewegen, drehen und verformen, wobei ein übergeordnetes Kontrollorgan die Zone schrittweise verkleinert, um die Interaktion auf zunehmend kompakte (und constraintkonforme) Layoutanordnungen hinzulenken. Durch die Berücksichtigung diverser Selbstorganisationsgrundsätze und die Einarbeitung von Ideen bestehender dezentralisierter Systeme ist SWARM in der Lage, das Phänomen der Emergenz hervorzurufen: obwohl jedes Modul nur eine begrenzte Sichtweise hat und egoistisch seine eigenen Ziele verfolgt, können sich auf globaler Ebene bemerkenswerte Gesamtlösungen herausbilden. Mehrere Beispiele veranschaulichen dieses emergente Verhalten in SWARM, wobei besonders interessant ist, dass sogar optimale Lösungen aus der Modulinteraktion entstehen können. Weitere Beispiele demonstrieren SWARMs Eignung zwecks Floorplanning sowie die Anwendung auf praktische Place-and-Route Probleme. Letzteres verdeutlicht, wie die interagierenden Module ihre jeweiligen Entwurfsanforderungen implizit (also: bottom-up) beachten, während sie gleichzeitig High-Level-Constraints berücksichtigen (z.B. die Layoutkontur, die top-down vom übergeordneten Kontrollorgan auferlegt wird). Experimentelle Ergebnisse zeigen, dass Optimierungsalgorithmen und prozedurale Generatoren von SWARM sowohl bezüglich Layoutqualität als auch Entwurfsproduktivität übertroffen werden können. Aus akademischer Sicht besteht SWARMs große Errungenschaft in der Erschließung fruchtbaren Neulands für zukünftige Arbeiten an neuartigen bottom-up meets top-down Automatismen. Diese könnten eines Tages der Schlüssel sein, um die Automatisierungslücke im analogen Layoutentwurf zu schließen

Advancing proxy-based haptic feedback in virtual reality

This thesis advances haptic feedback for Virtual Reality (VR). Our work is guided by Sutherland's 1965 vision of the ultimate display, which calls for VR systems to control the existence of matter. To push towards this vision, we build upon proxy-based haptic feedback, a technique characterized by the use of passive tangible props. The goal of this thesis is to tackle the central drawback of this approach, namely, its inflexibility, which yet hinders it to fulfill the vision of the ultimate display. Guided by four research questions, we first showcase the applicability of proxy-based VR haptics by employing the technique for data exploration. We then extend the VR system's control over users' haptic impressions in three steps. First, we contribute the class of Dynamic Passive Haptic Feedback (DPHF) alongside two novel concepts for conveying kinesthetic properties, like virtual weight and shape, through weight-shifting and drag-changing proxies. Conceptually orthogonal to this, we study how visual-haptic illusions can be leveraged to unnoticeably redirect the user's hand when reaching towards props. Here, we contribute a novel perception-inspired algorithm for Body Warping-based Hand Redirection (HR), an open-source framework for HR, and psychophysical insights. The thesis concludes by proving that the combination of DPHF and HR can outperform the individual techniques in terms of the achievable flexibility of the proxy-based haptic feedback.Diese Arbeit widmet sich haptischem Feedback für Virtual Reality (VR) und ist inspiriert von Sutherlands Vision des ultimativen Displays, welche VR-Systemen die Fähigkeit zuschreibt, Materie kontrollieren zu können. Um dieser Vision näher zu kommen, baut die Arbeit auf dem Konzept proxy-basierter Haptik auf, bei der haptische Eindrücke durch anfassbare Requisiten vermittelt werden. Ziel ist es, diesem Ansatz die für die Realisierung eines ultimativen Displays nötige Flexibilität zu verleihen. Dazu bearbeiten wir vier Forschungsfragen und zeigen zunächst die Anwendbarkeit proxy-basierter Haptik durch den Einsatz der Technik zur Datenexploration. Anschließend untersuchen wir in drei Schritten, wie VR-Systeme mehr Kontrolle über haptische Eindrücke von Nutzern erhalten können. Hierzu stellen wir Dynamic Passive Haptic Feedback (DPHF) vor, sowie zwei Verfahren, die kinästhetische Eindrücke wie virtuelles Gewicht und Form durch Gewichtsverlagerung und Veränderung des Luftwiderstandes von Requisiten vermitteln. Zusätzlich untersuchen wir, wie visuell-haptische Illusionen die Hand des Nutzers beim Greifen nach Requisiten unbemerkt umlenken können. Dabei stellen wir einen neuen Algorithmus zur Body Warping-based Hand Redirection (HR), ein Open-Source-Framework, sowie psychophysische Erkenntnisse vor. Abschließend zeigen wir, dass die Kombination von DPHF und HR proxy-basierte Haptik noch flexibler machen kann, als es die einzelnen Techniken alleine können

Research in Structures, Structural Dynamics and Materials, 1990

The Structural Dynamics and Materials (SDM) Conference was held on April 2 to 4, 1990 in Long Beach, California. This publication is a compilation of presentations of the work-in-progress sessions and does not contain papers from the regular sessions since those papers are published by AIAA in the conference proceedings

Change blindness: eradication of gestalt strategies

Arrays of eight, texture-defined rectangles were used as stimuli in a one-shot change blindness (CB) task where there was a 50% chance that one rectangle would change orientation between two successive presentations separated by an interval. CB was eliminated by cueing the target rectangle in the first stimulus, reduced by cueing in the interval and unaffected by cueing in the second presentation. This supports the idea that a representation was formed that persisted through the interval before being 'overwritten' by the second presentation (Landman et al, 2003 Vision Research 43149–164]. Another possibility is that participants used some kind of grouping or Gestalt strategy. To test this we changed the spatial position of the rectangles in the second presentation by shifting them along imaginary spokes (by ±1 degree) emanating from the central fixation point. There was no significant difference seen in performance between this and the standard task [F(1,4)=2.565, p=0.185]. This may suggest two things: (i) Gestalt grouping is not used as a strategy in these tasks, and (ii) it gives further weight to the argument that objects may be stored and retrieved from a pre-attentional store during this task

Large space structures and systems in the space station era: A bibliography with indexes

Bibliographies and abstracts are listed for 1372 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1990 and June 30, 1990. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design according to system, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems

Large space structures and systems in the space station era: A bibliography with indexes (supplement 04)

Bibliographies and abstracts are listed for 1211 reports, articles, and other documents introduced into the NASA scientific and technical information system between 1 Jul. and 30 Dec. 1991. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design according to system, interactive analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems

Large space structures and systems in the space station era: A bibliography with indexes (supplement 03)

Bibliographies and abstracts are listed for 1221 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1991 and June 30, 1991. Topics covered include large space structures and systems, space stations, extravehicular activity, thermal environments and control, tethering, spacecraft power supplies, structural concepts and control systems, electronics, advanced materials, propulsion, policies and international cooperation, vibration and dynamic controls, robotics and remote operations, data and communication systems, electric power generation, space commercialization, orbital transfer, and human factors engineering