A novel technique for load frequency control of multi-area power systems

In this paper, an adaptive type-2 fuzzy controller is proposed to control the load frequency of a two-area power system based on descending gradient training and error back-propagation. The dynamics of the system are completely uncertain. The multilayer perceptron (MLP) artificial neural network structure is used to extract Jacobian and estimate the system model, and then, the estimated model is applied to the controller, online. A proportional–derivative (PD) controller is added to the type-2 fuzzy controller, which increases the stability and robustness of the system against disturbances. The adaptation, being real-time and independency of the system parameters are new features of the proposed controller. Carrying out simulations on New England 39-bus power system, the performance of the proposed controller is compared with the conventional PI, PID and internal model control based on PID (IMC-PID) controllers. Simulation results indicate that our proposed controller method outperforms the conventional controllers in terms of transient response and stability

Observation of charge ordering signal in monovalent doped Nd0.75Na0.25-xKxMn1O3 (0 ≤ x ≤ 0.10) manganites

K doping in the compound of Nd0.75Na0.25-xKxMn1O3 (x = 0, 0.05 and 0.10) manganites have been investigated to study its effect on crystalline phase and surface morphology as well as electrical transport and magnetic properties. The structure properties of the Nd0.75Na0.25- xKxMnO3 manganite have been characterized using X-ray diffraction measurement and it proved that the crystalline phase of samples were essentially single phased and indexed as orthorhombic structure with space group of Pnma. The morphological study from scanning electron microscope showed there was an improvement on the grains boundaries and sizes as well as the compactness with K doping suggestively due to the difference of ionic radius. On the other hand, DC electrical resistivity measurement showed all samples exhibit insulating behavior. However, analysis of dlnρ/dT-1 vs. T revealed the clearly peaks could be observed at temperature 210K for x = 0 and the peaks were shifted to the lower temperature around 190 K and 165 K for x = 0.05 and x = 0.1 respectively, indicate the existence of charge ordering (CO) state in the compound. Meanwhile, the investigation on magnetic behavior showed all samples exhibit transition from paramagnetic phase to anti-ferromagnetic phase with decreasing temperature and the TN was observed to shift to lower temperature suggestively due to weakening of CO stat

Energy from organic sources

Elevated environmental awareness and exhaustion of resources are leading to develop substitute fuel from renewable resources that can be environmentally friendly. Bio-diesel fuel is a substitute to petrol base fuels currently being obtained from vegetable oils, animal fat, utilized oils from restaurants etc. Pet animal fats represent large wastes in tanneries. With a high energetically worth, animal fats may make up an energetical source with significant capital opportunities as raw substance (used with high precautionary measure) or also as oils acquired from ester interchange with alcohol (biodiesel) with higher facets being used as fuel at diesel engines

Pasteurization machine neurocontroller

Секция 2. Интеллектуальные информационные системыThe neurocontroller of the pasteurization machine was developed. It consists of two parts: the neuroemulator and the serial neurocontroller, which are based on the multilayer perceptron structure. The neurocontroller has been implemented as a module in the SCADA-system at OJSC «Savushkin product» and has a good effect in comparison with the conventional PID controller. Testing showed the effectiveness and fast response

Computational intelligence techniques for HVAC systems: a review

Buildings are responsible for 40% of global energy use and contribute towards 30% of the total CO2 emissions. The drive to reduce energy use and associated greenhouse gas emissions from buildings has acted as a catalyst in the development of advanced computational methods for energy efficient design, management and control of buildings and systems. Heating, ventilation and air conditioning (HVAC) systems are the major source of energy consumption in buildings and an ideal candidate for substantial reductions in energy demand. Significant advances have been made in the past decades on the application of computational intelligence (CI) techniques for HVAC design, control, management, optimization, and fault detection and diagnosis. This article presents a comprehensive and critical review on the theory and applications of CI techniques for prediction, optimization, control and diagnosis of HVAC systems.The analysis of trends reveals the minimization of energy consumption was the key optimization objective in the reviewed research, closely followed by the optimization of thermal comfort, indoor air quality and occupant preferences. Hardcoded Matlab program was the most widely used simulation tool, followed by TRNSYS, EnergyPlus, DOE–2, HVACSim+ and ESP–r. Metaheuristic algorithms were the preferred CI method for solving HVAC related problems and in particular genetic algorithms were applied in most of the studies. Despite the low number of studies focussing on MAS, as compared to the other CI techniques, interest in the technique is increasing due to their ability of dividing and conquering an HVAC optimization problem with enhanced overall performance. The paper also identifies prospective future advancements and research directions

Artificial Intelligence-based Control Techniques for HVDC Systems

The electrical energy industry depends, among other things, on the ability of networks to deal with uncertainties from several directions. Smart-grid systems in high-voltage direct current (HVDC) networks, being an application of artificial intelligence (AI), are a reliable way to achieve this goal as they solve complex problems in power system engineering using AI algorithms. Due to their distinctive characteristics, they are usually effective approaches for optimization problems. They have been successfully applied to HVDC systems. This paper presents a number of issues in HVDC transmission systems. It reviews AI applications such as HVDC transmission system controllers and power flow control within DC grids in multi-terminal HVDC systems. Advancements in HVDC systems enable better performance under varying conditions to obtain the optimal dynamic response in practical settings. However, they also pose difficulties in mathematical modeling as they are non-linear and complex. ANN-based controllers have replaced traditional PI controllers in the rectifier of the HVDC link. Moreover, the combination of ANN and fuzzy logic has proven to be a powerful strategy for controlling excessively non-linear loads. Future research can focus on developing AI algorithms for an advanced control scheme for UPFC devices. Also, there is a need for a comprehensive analysis of power fluctuations or steady-state errors that can be eliminated by the quick response of this control scheme. This survey was informed by the need to develop adaptive AI controllers to enhance the performance of HVDC systems based on their promising results in the control of power systems. Doi: 10.28991/ESJ-2023-07-02-024 Full Text: PD

Design of Intelligent Control System Based on General Regression Neural Network Algorithm

this study discuss about the General RegressionNeural Network (GRNN) implementation for control systemapplication. Nowadays, hybrid theory tends to investigate withincontrol system research. Previously, many kinds of neuralnetwork control schemes have been deployed. The problem wasrelated to the optimization in training phase to satisfy theresponse system result based on plant’s identification phase.GRNN was known as one passing learning algorithm with ahighly parallel structure. The algorithmic form can be used forany regression problem in which the assumption of linearity datais not satisfied related on performance problem. Thisinvestigation using GRNN as the online dynamics learning modelcan be use as predictor or estimator for control signal with theperformance reaches 99% to prove that GRNN is reliable as oneof modern Intelligent Control System

Robust online adaptive neural network control for the regulation of treadmill exercises

The paper proposes a robust online adaptive neural network control scheme for an automated treadmill system. The proposed control scheme is based on Feedback-Error Learning Approach (FELA), by using which the plant Jacobian calculation problem is avoided. Modification of the learning algorithm is proposed to solve the overtraining issue, guaranteeing to system stability and system convergence. As an adaptive neural network controller can adapt itself to deal with system uncertainties and external disturbances, this scheme is very suitable for treadmill exercise regulation when the model of the exerciser is unknown or inaccurate. In this study, exercise intensity (measured by heart rate) is regulated by simultaneously manipulating both treadmill speed and gradient in order to achieve fast tracking for which a single input multi output (SIMO) adaptive neural network controller has been designed. Real-time experiment result confirms that robust performance for nonlinear multivariable system under model uncertainties and unknown external disturbances can indeed be achieved. © 2011 IEEE

Review of dynamic positioning control in maritime microgrid systems

For many offshore activities, including offshore oil and gas exploration and offshore wind farm construction, it is essential to keep the position and heading of the vessel stable. The dynamic positioning system is a progressive technology, which is extensively used in shipping and other maritime structures. To maintain the vessels or platforms from displacement, its thrusters are used automatically to control and stabilize the position and heading of vessels in sea state disturbances. The theory of dynamic positioning has been studied and developed in terms of control techniques to achieve greater accuracy and reduce ship movement caused by environmental disturbance for more than 30 years. This paper reviews the control strategies and architecture of the DPS in marine vessels. In addition, it suggests possible control principles and makes a comparison between the advantages and disadvantages of existing literature. Some details for future research on DP control challenges are discussed in this paper