9,507 research outputs found
Turbo-Coded Adaptive Modulation Versus Space-Time Trellis Codes for Transmission over Dispersive Channels
Decision feedback equalizer (DFE)-aided turbocoded wideband adaptive quadrature amplitude modulation (AQAM) is proposed, which is capable of combating the temporal channel quality variation of fading channels. A procedure is suggested for determining the AQAM switching thresholds and the specific turbo-coding rates capable of maintaining the target bit-error rate while aiming for achieving a highly effective bits per symbol throughput. As a design alternative, we also employ multiple-input/multiple-output DFE-aided space–time trellis codes, which benefit from transmit diversity and hence reduce the temporal channel quality fluctuations. The performance of both systems is characterized and compared when communicating over the COST 207 typical urban wideband fading channel. It was found that the turbo-coded AQAM scheme outperforms the two-transmitter space–time trellis coded system employing two receivers; although, its performance is inferior to the space–time trellis coded arrangement employing three receivers. Index Terms—Coded adaptive modulation, dispersive channels, space–time trellis codes
Spatially Coupled Codes and Optical Fiber Communications: An Ideal Match?
In this paper, we highlight the class of spatially coupled codes and discuss
their applicability to long-haul and submarine optical communication systems.
We first demonstrate how to optimize irregular spatially coupled LDPC codes for
their use in optical communications with limited decoding hardware complexity
and then present simulation results with an FPGA-based decoder where we show
that very low error rates can be achieved and that conventional block-based
LDPC codes can be outperformed. In the second part of the paper, we focus on
the combination of spatially coupled LDPC codes with different demodulators and
detectors, important for future systems with adaptive modulation and for
varying channel characteristics. We demonstrate that SC codes can be employed
as universal, channel-agnostic coding schemes.Comment: Invited paper to be presented in the special session on "Signal
Processing, Coding, and Information Theory for Optical Communications" at
IEEE SPAWC 201
Adaptive Demodulation in Differentially Coherent Phase Systems: Design and Performance Analysis
Adaptive Demodulation (ADM) is a newly proposed rate-adaptive system which
operates without requiring Channel State Information (CSI) at the transmitter
(unlike adaptive modulation) by using adaptive decision region boundaries at
the receiver and encoding the data with a rateless code. This paper addresses
the design and performance of an ADM scheme for two common differentially
coherent schemes: M-DPSK (M-ary Differential Phase Shift Keying) and M-DAPSK
(M-ary Differential Amplitude and Phase Shift Keying) operating over AWGN and
Rayleigh fading channels. The optimal method for determining the most reliable
bits for a given differential detection scheme is presented. In addition,
simple (near-optimal) implementations are provided for recovering the most
reliable bits from a received pair of differentially encoded symbols for
systems using 16-DPSK and 16- DAPSK. The new receivers offer the advantages of
a rate-adaptive system, without requiring CSI at the transmitter and a coherent
phase reference at the receiver. Bit error analysis for the ADM system in both
cases is presented along with numerical results of the spectral efficiency for
the rate-adaptive systems operating over a Rayleigh fading channel.Comment: 25 pages, 11 Figures, submitted to IEEE Transactions on
Communications, June 1, 201
Comparison of direct and heterodyne detection optical intersatellite communication links
The performance of direct and heterodyne detection optical intersatellite communication links are evaluated and compared. It is shown that the performance of optical links is very sensitive to the pointing and tracking errors at the transmitter and receiver. In the presence of random pointing and tracking errors, optimal antenna gains exist that will minimize the required transmitter power. In addition to limiting the antenna gains, random pointing and tracking errors also impose a power penalty in the link budget. This power penalty is between 1.6 to 3 dB for a direct detection QPPM link, and 3 to 5 dB for a heterodyne QFSK system. For the heterodyne systems, the carrier phase noise presents another major factor of performance degradation that must be considered. In contrast, the loss due to synchronization error is small. The link budgets for direct and heterodyne detection systems are evaluated. It is shown that, for systems with large pointing and tracking errors, the link budget is dominated by the spatial tracking error, and the direct detection system shows a superior performance because it is less sensitive to the spatial tracking error. On the other hand, for systems with small pointing and tracking jitters, the antenna gains are in general limited by the launch cost, and suboptimal antenna gains are often used in practice. In which case, the heterodyne system has a slightly higher power margin because of higher receiver sensitivity
Advanced digital modulation: Communication techniques and monolithic GaAs technology
Communications theory and practice are merged with state-of-the-art technology in IC fabrication, especially monolithic GaAs technology, to examine the general feasibility of a number of advanced technology digital transmission systems. Satellite-channel models with (1) superior throughput, perhaps 2 Gbps; (2) attractive weight and cost; and (3) high RF power and spectrum efficiency are discussed. Transmission techniques possessing reasonably simple architectures capable of monolithic fabrication at high speeds were surveyed. This included a review of amplitude/phase shift keying (APSK) techniques and the continuous-phase-modulation (CPM) methods, of which MSK represents the simplest case
- …