Packet Loss in Terrestrial Wireless and Hybrid Networks

The presence of both a geostationary satellite link and a terrestrial local wireless link on the same path of a given network connection is becoming increasingly common, thanks to the popularity of the IEEE 802.11 protocol. The most common situation where a hybrid network comes into play is having a Wi-Fi link at the network edge and the satellite link somewhere in the network core. Example of scenarios where this can happen are ships or airplanes where Internet connection on board is provided through a Wi-Fi access point and a satellite link with a geostationary satellite; a small office located in remote or isolated area without cabled Internet access; a rescue team using a mobile ad hoc Wi-Fi network connected to the Internet or to a command centre through a mobile gateway using a satellite link. The serialisation of terrestrial and satellite wireless links is problematic from the point of view of a number of applications, be they based on video streaming, interactive audio or TCP. The reason is the combination of high latency, caused by the geostationary satellite link, and frequent, correlated packet losses caused by the local wireless terrestrial link. In fact, GEO satellites are placed in equatorial orbit at 36,000 km altitude, which takes the radio signal about 250 ms to travel up and down. Satellite systems exhibit low packet loss most of the time, with typical project constraints of 10−8 bit error rate 99% of the time, which translates into a packet error rate of 10−4, except for a few days a year. Wi-Fi links, on the other hand, have quite different characteristics. While the delay introduced by the MAC level is in the order of the milliseconds, and is consequently too small to affect most applications, its packet loss characteristics are generally far from negligible. In fact, multipath fading, interference and collisions affect most environments, causing correlated packet losses: this means that often more than one packet at a time is lost for a single fading even

Multipath Routing in Wireless Sensor Networks: Survey and Research Challenges

A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks

Integrity Monitoring Using ARAIM Algorithm in Urban Environment

Aviation is one of the earliest application of the Global Navigation Satellite System (GNSS). Since the early days of the Global Positioning System (GPS), satellite navigation has been an essential part of the aviation industry. Being a particular mean of transport, which usually involves a large number of human lives, civil aviation always requires a high level of reliability from the navigation system. Such requirement brings about the concept of integrity, which concerns about the consistency and reliability of a navigation system, is defined as the capability of the system to provide timely warning when it should not be used for navigation. The concept of integrity allows the standardization of guidance systems' performance, with the utmost purpose of keeping safety for every flight. The concept of integrity has gained interests in other GNSS applications as well, especially in those that also require high reliability from the navigation solution, such as Intelligent Transport System (ITS), railways. This leads to the necessity to adapt the integrity monitoring techniques, in particular the Receiver Autonomous Integrity Monitoring (RAIM) algorithms, to use in working conditions other than the typical airport areas, such as urban environment. As a matter of fact, adaptation of RAIM algorithms to urban environment requires a throughout analysis of the environmental difference of the working condition as well as the requirement of the intended applications. This thesis focuses on developing a Kalman filter-based Advanced RAIM (ARAIM) algorithm for urban environment, which is an adaptation of the conventional ARAIM algorithm for civil aviation. ARAIM algorithm is considered the next generation of RAIM, aiming at providing higher integrity performance for more stringent phase of flight. The first step is to survey the necessary changes to adapt ARAIM algorithm to urban scenario. Experimental study highlights the prerequisite of finding a noise model to represents the signal noise level in urban area. After a suitable noise model was found after a comparative study, the KF-based ARAIM algorithm was developed. This method evaluates the separation of state correction using different subsets of measurement to detect abnormalities as well as potential faulty satellites for exclusion. The proposed method was also validated using simulation and real data. Performance analysis results show that the proposed algorithm can effectively follows the changes of signal quality which is expected to occur frequently when moving in urban environment, confirming its suitability for integrity monitoring in urban environment

5G無線通信における誤り訂正符号化方式の評価に関する研究

早大学位記番号:新8267早稲田大

Distributed video coding for wireless video sensor networks: a review of the state-of-the-art architectures

Distributed video coding (DVC) is a relatively new video coding architecture originated from two fundamental theorems namely, Slepian–Wolf and Wyner–Ziv. Recent research developments have made DVC attractive for applications in the emerging domain of wireless video sensor networks (WVSNs). This paper reviews the state-of-the-art DVC architectures with a focus on understanding their opportunities and gaps in addressing the operational requirements and application needs of WVSNs