Experimental investigation of effect of fingertip stiffness on resistible force in grasping

In this study, we experimentally investigated the effect of robot fingertip stiffness on the maximum resistible force. The maximum resistible force is defined as the maximum tangential force at which the fingertip can maintain contact when applying and increasing tangential/shearing force. We include in the definition of this term the effect of fingertip deformation. In contrast to our previous study [11], cylindrical fingertips with flat surfaces were used in this study so that the contact area would remain the same when there was no tangential/shearing force. This made it possible to see the effect of fingertip stiffness more clearly. We also investigated the effect of curvature of the contact surface, which was not investigated in depth in [11]. The main findings are as follows. 1) Harder fingertips produce larger resistible forces, irrespective of the shape of the contact surface (flat or curved). 2) For harder fingertips, the maximum resistible force depends largely on the shape of the contact surface, while for softer fingertips, the shape has little effect. 3) For softer fingertips, the magnitude of the resistible force changes little even when the normal force increases. © 2015 IEEE

Experimental investigation of effect of fingertip stiffness on friction while grasping an object

In this study, we experimentally investigated the effect of robot fingertip stiffness on friction during grasping of an object. To make robots more human-friendly, robotic hands with soft surfaces have been developed. A soft fingertip, i.e., one with low stiffness, is considered desirable because it produces high friction. However, in our experiments, we were able to obtain high friction from a stiff fingertip under a certain condition. We initially investigated the maximum resistible force when solid objects with different angled surfaces were grasped by spherical fingertips of different stiffness. When the contact surface was flat, a stiffer fingertip produced larger frictional force. When the contact surface was highly convex, the maximum frictional force increased with decreasing fingertip stiffness. Secondly, we examined the relationships among the contact area, the load, and the maximum frictional force. We reformulated the relationship between the load and the maximum frictional force and, together with our experimental results, used it to determine the factor that increased the maximum frictional force. © 2014 IEEE.2014 IEEE International Conference on Robotics and Automation, ICRA 2014; Hong Kong Convention and Exhibition CenterHong Kong; China; 31 May 2014 through 7 June 2014; Category numberCFP14RAA-ART; Code 10739

Tactile Sensors for Friction Estimation and Incipient Slip Detection - Toward Dexterous Robotic Manipulation:A Review

Humans can handle and manipulate objects with ease; however, human dexterity has yet to be matched by artificial systems. Receptors in our fingers and hands provide essential tactile information to the motor control system during dexterous manipulation such that the grip force is scaled to the tangential forces according to the coefficient of friction. Likewise, tactile sensing will become essential for robotic and prosthetic gripping performance as applications move toward unstructured environments. However, most existing research ignores the need to sense the frictional properties of the sensor-object interface, which (along with contact forces and torques) is essential for finding the minimum grip force required to securely grasp an object. Here, we review this problem by surveying the field of tactile sensing from the perspective that sensors should: 1) detect gross slip (to adjust the grip force); 2) detect incipient slip (dependent on the frictional properties of the sensor-object interface and the geometries and mechanics of the sensor and the object) as an indication of grip security; or 3) measure friction on contact with an object and/or following a gross or incipient slip event while manipulating an object. Recommendations are made to help focus future sensor design efforts toward a generalizable and practical solution to sense, and hence control grip security. Specifically, we propose that the sensor mechanics should encourage incipient slip, by allowing parts of the sensor to slip while other parts remain stuck, and that instrumentation should measure displacement and deformation to complement conventional force, pressure, and vibration tactile sensing

ReHand - a portable assistive rehabilitation hand exoskeleton

This dissertation presents a synthesis of a novel underactuated exoskeleton (namely ReHand2) thought and designed for a task-oriented rehabilitation and/or for empower the human hand. The first part of this dissertation shows the current context about the robotic rehabilitation with a focus on hand pathologies, which influence the hand capability. The chapter is concluded with the presentation of ReHand2. The second chapter describes the human hand biomechanics. Starting from the definition of human hand anatomy, passing through anthropometric data, to taxonomy on hand grasps and finger constraints, both from static and dynamic point of view. In addition, some information about the hand capability are given. The third chapter analyze the current state of the art in hand exoskeleton for rehabilitation and empower tasks. In particular, the chapter presents exoskeleton technologies, from mechanisms to sensors, passing though transmission and actuators. Finally, the current state of the art in terms of prototype and commercial products is presented. The fourth chapter introduces the concepts of underactuation with the basic explanation and the classical notation used typically in the prosthetic field. In addition, the chapter describe also the most used differential elements in the prosthetic, follow by a statical analysis. Moreover typical transmission tree at inter-finger level as well as the intra- finger underactuation are explained . The fifth chapter presents the prototype called ReHand summarizing the device description and explanation of the working principle. It describes also the kinetostatic analysis for both, inter- and the intra-finger modules. in the last section preliminary results obtained with the exoskeleton are shown and discussed, attention is pointed out on prototype’s problems that have carry out at the second version of the device. The sixth chapter describes the evolution of ReHand, describing the kinematics and dynamics behaviors. In particular, for the mathematical description is introduced the notation used in order to analyze and optimize the geometry of the entire device. The introduced model is also implemented in Matlab Simulink environment. Finally, the chapter presents the new features. The seventh chapter describes the test bench and the methodologies used to evaluate the device statical, and dynamical performances. The chapter presents and discuss the experimental results and compare them with simulated one. Finally in the last chapter the conclusion about the ReHand project are proposed as well as the future development. In particular, the idea to test de device in relevant environments. In addition some preliminary considerations about the thumb and the wrist are introduced, exploiting the possibility to modify the entire layout of the device, for instance changing the actuator location

Tactile Superresolution and Biomimetic Hyperacuity

Motivated by the impact of superresolution methods for imaging, we undertake a detailed and systematic analysis of localization acuity for a biomimetic fingertip and a flat region of tactile skin. We identify three key factors underlying superresolution that enable the perceptual acuity to surpass the sensor resolution: 1) the sensor is constructed with multiple overlapping, broad but sensitive receptive fields; 2) the tactile perception method interpolates between receptors (taxels) to attain subtaxel acuity; and 3) active perception ensures robustness to unknown initial contact location. All factors follow from active Bayesian perception applied to biomimetic tactile sensors with an elastomeric covering that spreads the contact over multiple taxels. In consequence, we attain extreme superresolution with a 35-fold improvement of localization acuity (0.12 mm) over sensor resolution (4 mm). We envisage that these principles will enable cheap high-acuity tactile sensors that are highly customizable to suit their robotic use. Practical applications encompass any scenario where an end-effector must be placed accurately via the sense of touch

空中ジェスチャ・インタラクションにおける触覚提示の高臨場感化および安定化に関する研究

Tohoku University昆陽雅司課

Development of Sensing Systems for Improving Surgical Grasper Performance

Minimally invasive techniques play a vital and increasing role in modern surgery. In these procedures, surgical graspers are essential in replacing the surgeon’s fingertips as the main manipulator of delicate soft tissues. Current graspers lack haptic feedback, restricting the surgeon to visual feedback. Studies show that this can frequently lead to morbidity or task errors due to inappropriate application of force. Existing research has sought to address these concerns and improve the safety and performance of grasping through the provision of haptic feedback to the surgeon. However, an effective method of grasping task optimisation has not been found. This thesis explores new sensing approaches intended to reduce errors when manipulating soft tissues, and presents a novel tactile sensor designed for deployment in the grasper jaw. The requirements were first established through discussion with clinical partners and a literature review. This resulted in a conceptual approach to use multi-axis tactile sensing within the grasper jaw as a potential novel solution. As a foundation to the research, a study was conducted using instrumented graspers to investigate the characteristics of grasp force employed by surgeons of varying skill levels. The prevention of tissue slip was identified as a key method in the prevention of grasper misuse, preventing both abrasion through slip and crush damage. To detect this phenomena, a novel method was proposed based on an inductive pressure sensing system. To investigate the efficacy of this technique, experimental and computational modelling investigations were conducted. Computational models were used to better understand the transducer mechanisms, to optimise sensor geometry and to evaluate performance in slip detection. Prototype sensors were then fabricated and experimentally evaluated for their ultimate use in slip detection within a surgical grasper. The work concludes by considering future challenges to clinical translation and additional opportunities for this research in different domains