15 research outputs found
Congestion Control for Network-Aware Telehaptic Communication
Telehaptic applications involve delay-sensitive multimedia communication
between remote locations with distinct Quality of Service (QoS) requirements
for different media components. These QoS constraints pose a variety of
challenges, especially when the communication occurs over a shared network,
with unknown and time-varying cross-traffic. In this work, we propose a
transport layer congestion control protocol for telehaptic applications
operating over shared networks, termed as dynamic packetization module (DPM).
DPM is a lossless, network-aware protocol which tunes the telehaptic
packetization rate based on the level of congestion in the network. To monitor
the network congestion, we devise a novel network feedback module, which
communicates the end-to-end delays encountered by the telehaptic packets to the
respective transmitters with negligible overhead. Via extensive simulations, we
show that DPM meets the QoS requirements of telehaptic applications over a wide
range of network cross-traffic conditions. We also report qualitative results
of a real-time telepottery experiment with several human subjects, which reveal
that DPM preserves the quality of telehaptic activity even under heavily
congested network scenarios. Finally, we compare the performance of DPM with
several previously proposed telehaptic communication protocols and demonstrate
that DPM outperforms these protocols.Comment: 25 pages, 19 figure
Consensus Based Networking of Distributed Virtual Environments
Distributed Virtual Environments (DVEs) are challenging to create as the goals of consistency and responsiveness become contradictory under increasing latency. DVEs have been considered as both distributed transactional databases and force-reflection systems. Both are good approaches, but they do have drawbacks. Transactional systems do not support Level 3 (L3) collaboration: manipulating the same degree-of-freedom at the same time. Force-reflection requires a client-server architecture and stabilisation techniques. With Consensus Based Networking (CBN), we suggest DVEs be considered as a distributed data-fusion problem. Many simulations run in parallel and exchange their states, with remote states integrated with continous authority. Over time the exchanges average out local differences, performing a distribued-average of a consistent, shared state. CBN aims to build simulations that are highly responsive, but consistent enough for use cases such as the piano-movers problem. CBN's support for heterogeneous nodes can transparently couple different input methods, avoid the requirement of determinism, and provide more options for personal control over the shared experience. Our work is early, however we demonstrate many successes, including L3 collaboration in room-scale VR, 1000's of interacting objects, complex configurations such as stacking, and transparent coupling of haptic devices. These have been shown before, but each with a different technique; CBN supports them all within a single, unified system
Haptics: state of the art survey
This paper presents a novel approach to the understanding of Haptic
and its related fields where haptics is used extensively like in display
systems, communication, different types of haptic devices, and
interconnection of haptic displays where virtual environment should
feel like equivalent physical systems. There have been escalating
research interests on areas relating to haptic modality in recent years,
towards multiple fields. However, there seems to be limited studies in
determining the various subfields and interfacing and related
information on haptic user interfaces and its influence on the fields
mentioned. This paper aims to bring forth the theory behind the essence
of Haptics and its Subfields like haptic interfaces and its applications
Haptics: Science, Technology, Applications
This open access book constitutes the proceedings of the 12th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2020, held in Leiden, The Netherlands, in September 2020. The 60 papers presented in this volume were carefully reviewed and selected from 111 submissions. The were organized in topical sections on haptic science, haptic technology, and haptic applications. This year's focus is on accessibility
Haptics: Science, Technology, Applications
This open access book constitutes the proceedings of the 12th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2020, held in Leiden, The Netherlands, in September 2020. The 60 papers presented in this volume were carefully reviewed and selected from 111 submissions. The were organized in topical sections on haptic science, haptic technology, and haptic applications. This year's focus is on accessibility
Consensus Based Networking of Distributed Virtual Environments.
Distributed Virtual Environments (DVEs) are challenging to create as the goals of consistency and responsiveness become contradictory under increasing latency. DVEs have been considered as both distributed transactional databases and force-reflection systems. Both are good approaches, but they do have drawbacks. Transactional systems do not support Level 3 (L3) collaboration: manipulating the same degree-of-freedom at the same time. Force-reflection requires a client-server architecture and stabilisation techniques. With Consensus Based Networking (CBN), we suggest DVEs be considered as a distributed data-fusion problem. Many simulations run in parallel and exchange their states, with remote states integrated with continous authority. Over time the exchanges average out local differences, performing a distribued-average of a consistent, shared state. CBN aims to build simulations that are highly responsive, but consistent enough for use cases such as the piano-movers problem. CBN's support for heterogeneous nodes can transparently couple different input methods, avoid the requirement of determinism, and provide more options for personal control over the shared experience. Our work is early, however we demonstrate many successes, including L3 collaboration in room-scale VR, 1000's of interacting objects, complex configurations such as stacking, and transparent coupling of haptic devices. These have been shown before, but each with a different technique; CBN supports them all within a single, unified system
The Shape of Damping: Optimizing Damping Coefficients to Improve Transparency on Bilateral Telemanipulation
This thesis presents a novel optimization-based passivity control algorithm for hapticenabled bilateral teleoperation systems involving multiple degrees of freedom. In particular, in the context of energy-bounding control, the contribution focuses on the implementation of a passivity layer for an existing time-domain scheme, ensuring optimal transparency of the interaction along subsets of the environment space which are preponderant for the given task, while preserving the energy bounds required for passivity. The involved optimization problem is convex and amenable to real-time implementation. The effectiveness of the proposed design is validated via an experiment performed on a virtual teleoperated environment.
The interplay between transparency and stability is a critical aspect in haptic-enabled bilateral teleoperation control. While it is important to present the user with the true impedance of the environment, destabilizing factors such as time delays, stiff environments, and a relaxed grasp on the master device may compromise the stability and safety of the system. Passivity has been exploited as one of the the main tools for providing sufficient conditions for stable teleoperation in several controller design approaches, such as the scattering algorithm, timedomain passivity control, energy bounding algorithm, and passive set position modulation.
In this work it is presented an innovative energy-based approach, which builds upon existing time-domain passivity controllers, improving and extending their effectiveness and functionality.
The set of damping coefficients are prioritized in each degree of freedom, the resulting transparency presents a realistic force feedback in comparison to the other directions. Thus, the prioritization takes effect using a quadratic programming algorithm to find the optimal values for the damping.
Finally, the energy tanks approach on passivity control is a solution used to ensure stability in a system for robotics bilateral manipulation. The bilateral telemanipulation must maintain the principle of passivity in all moments to preserve the system\u2019s stability. This work presents a brief introduction to haptic devices as a master component on the telemanipulation chain; the end effector in the slave side is a representation of an interactive object within an environment having a force sensor as feedback signal. The whole interface is designed into a cross-platform framework named ROS, where the user interacts with the system. Experimental results are presented
Mitigating User Frustration through Adaptive Feedback based on Human-Automation Etiquette Strategies
The objective of this study is to investigate the effects of feedback and user frustration in human-computer interaction (HCI) and examine how to mitigate user frustration through feedback based on human-automation etiquette strategies. User frustration in HCI indicates a negative feeling that occurs when efforts to achieve a goal are impeded. User frustration impacts not only the communication with the computer itself, but also productivity, learning, and cognitive workload. Affect-aware systems have been studied to recognize user emotions and respond in different ways. Affect-aware systems need to be adaptive systems that change their behavior depending on users’ emotions. Adaptive systems have four categories of adaptations. Previous research has focused on primarily function allocation and to a lesser extent information content and task scheduling. However, the fourth approach, changing the interaction styles is the least explored because of the interplay of human factors considerations. Three interlinked studies were conducted to investigate the consequences of user frustration and explore mitigation techniques. Study 1 showed that delayed feedback from the system led to higher user frustration, anger, cognitive workload, and physiological arousal. In addition, delayed feedback decreased task performance and system usability in a human-robot interaction (HRI) context. Study 2 evaluated a possible approach of mitigating user frustration by applying human-human etiquette strategies in a tutoring context. The results of Study 2 showed that changing etiquette strategies led to changes in performance, motivation, confidence, and satisfaction. The most effective etiquette strategies changed when users were frustrated. Based on these results, an adaptive tutoring system prototype was developed and evaluated in Study 3. By utilizing a rule set derived from Study 2, the tutor was able to use different automation etiquette strategies to target and improve motivation, confidence, satisfaction, and performance using different strategies, under different levels of user frustration. This work establishes that changing the interaction style alone of a computer tutor can affect a user’s motivation, confidence, satisfaction, and performance. Furthermore, the beneficial effect of changing etiquette strategies is greater when users are frustrated. This work provides a basis for future work to develop affect-aware adaptive systems to mitigate user frustration