Model-Free Predictive Control of Motor Drives and Power Converters:A Review

Predictive control has emerged as a promising control method in a variety of technological fields. Model predictive control, as one of the subdivisions of this control method, has found a growing number of applications in power electronics and motor drives. In practical implementations, model predictive control faces performance degradation of the controlled plant due to its dependency on a model. There are considerable numbers of review papers that are devoted to the different points of view of predictive control. However, the existing literature lacks a review study that addresses the solutions for parameter dependency of the model predictive control method. Recently, model-free predictive control has been used in drives and power electronics as a solution for dealing with the model-dependency of the model predictive control method. There are many papers that have used such methods. In this paper, a classification is proposed for the different implementation types of model-free predictive control or similar methods that address model parameter uncertainties. Additionally, a comparison between the methods is also presented

Design and Advanced Model Predictive Control of Wide Bandgap Based Power Converters

The field of power electronics (PE) is experiencing a revolution by harnessing the superior technical characteristics of wide-band gap (WBG) materials, namely Silicone Carbide (SiC) and Gallium Nitride (GaN). Semiconductor devices devised using WBG materials enable high temperature operation at reduced footprint, offer higher blocking voltages, and operate at much higher switching frequencies compared to conventional Silicon (Si) based counterpart. These characteristics are highly desirable as they allow converter designs for challenging applications such as more-electric-aircraft (MEA), electric vehicle (EV) power train, and the like. This dissertation presents designs of a WBG based power converters for a 1 MW, 1 MHz ultra-fast offboard EV charger, and 250 kW integrated modular motor drive (IMMD) for a MEA application. The goal of these designs is to demonstrate the superior power density and efficiency that are achievable by leveraging the power of SiC and GaN semiconductors. Ultra-fast EV charging is expected to alleviate the challenge of range anxiety , which is currently hindering the mass adoption of EVs in automotive market. The power converter design presented in the dissertation utilizes SiC MOSFETs embedded in a topology that is a modification of the conventional three-level (3L) active neutral-point clamped (ANPC) converter. A novel phase-shifted modulation scheme presented alongside the design allows converter operation at switching frequency of 1 MHz, thereby miniaturizing the grid-side filter to enhance the power density. IMMDs combine the power electronic drive and the electric machine into a single unit, and thus is an efficient solution to realize the electrification of aircraft. The IMMD design presented in the dissertation uses GaN devices embedded in a stacked modular full-bridge converter topology to individually drive each of the motor coils. Various issues and solutions, pertaining to paralleling of GaN devices to meet the high current requirements are also addressed in the thesis. Experimental prototypes of the SiC ultra-fast EV charger and GaN IMMD were built, and the results confirm the efficacy of the proposed designs. Model predictive control (MPC) is a nonlinear control technique that has been widely investigated for various power electronic applications in the past decade. MPC exploits the discrete nature of power converters to make control decisions using a cost function. The controller offers various advantages over, e.g., linear PI controllers in terms of fast dynamic response, identical performance at a reduced switching frequency, and ease of applicability to MIMO applications. This dissertation also investigates MPC for key power electronic applications, such as, grid-tied VSC with an LCL filter and multilevel VSI with an LC filter. By implementing high performance MPC controllers on WBG based power converters, it is possible to formulate designs capable of fast dynamic tracking, high power operation at reduced THD, and increased power density

System configuration, fault detection, location, isolation and restoration: a review on LVDC Microgrid protections

Low voltage direct current (LVDC) distribution has gained the significant interest of research due to the advancements in power conversion technologies. However, the use of converters has given rise to several technical issues regarding their protections and controls of such devices under faulty conditions. Post-fault behaviour of converter-fed LVDC system involves both active converter control and passive circuit transient of similar time scale, which makes the protection for LVDC distribution significantly different and more challenging than low voltage AC. These protection and operational issues have handicapped the practical applications of DC distribution. This paper presents state-of-the-art protection schemes developed for DC Microgrids. With a close look at practical limitations such as the dependency on modelling accuracy, requirement on communications and so forth, a comprehensive evaluation is carried out on those system approaches in terms of system configurations， fault detection, location, isolation and restoration

Suppression of Second-Order Harmonic Current for Droop-Controlled Distributed Energy Resource Converters in DC Microgrids

Droop-controlled distributed energy resource converters in dc microgrids usually show low output impedances. When coupled with ac systems, second-order harmonics typically appear on the dc-bus voltage, causing significant harmonic currents at the converters resource side. This paper shows how to reduce such undesired currents by means of notch filters and resonant regulators included in the converters control loops. The main characteristics of these techniques in terms of harmonic attenuation and stability are systematically investigated. In particular, it is shown that the voltage control-loop bandwidth is limited to be below twice the line frequency to avoid instability. Then, a modified notch filter and a modified resonant regulator are proposed, allowing to remove the constraint on the voltage loop bandwidth. The resulting methods (i.e., the notch filter, the resonant regulator, and their corresponding modified versions) are evaluated in terms of output impedance and stability. Experimental results from a dc microgrid prototype composed of three dc-dc converters and one dc-ac converter, all with a rated power of 5kW, are reported

A Hybrid Photovoltaic-Fuel Cell for Grid Integration With Jaya-Based Maximum Power Point Tracking:Experimental Performance Evaluation

This paper deals the grid integration of photovoltaic (PV), fuel cell, and ultra-capacitor with maximum power point tracking (MPPT). The voltage oriented control for the grid-integrated inverter is proposed to regulate dc link voltage. Here, the fuel cell is employed as the main renewable energy source and PV as an auxiliary source with ultra-capacitor, which compensates power variation. An integrated CUK converter is proposed for peak power extraction from PV modules. The Jaya-based MPPT method is employed to achieve fast PV tracking ability with zero deviation around maximum power point (MPP) and has accelerated searched performance in equated with particle swarm optimization (PSO) and artificial bee colony (ABC) techniques. The hybrid PV-fuel cell with ultra-capacitor as energy storage works effectively under varying operating conditions. Compared to other energy storing devices, ultra-capacitor provides a fast dynamic response by absorbing/delivering power fluctuations. The hybrid PV-fuel storage control methodologies are experimentally validated using dSPACE (DS1104) board that provides optimal power extraction with stable power affirmation for a standalone/grid-connected system

Urban and extra-urban hybrid vehicles: a technological review

Pollution derived from transportation systems is a worldwide, timelier issue than ever. The abatement actions of harmful substances in the air are on the agenda and they are necessary today to safeguard our welfare and that of the planet. Environmental pollution in large cities is approximately 20% due to the transportation system. In addition, private traffic contributes greatly to city pollution. Further, “vehicle operating life” is most often exceeded and vehicle emissions do not comply with European antipollution standards. It becomes mandatory to find a solution that respects the environment and, realize an appropriate transportation service to the customers. New technologies related to hybrid –electric engines are making great strides in reducing emissions, and the funds allocated by public authorities should be addressed. In addition, the use (implementation) of new technologies is also convenient from an economic point of view. In fact, by implementing the use of hybrid vehicles, fuel consumption can be reduced. The different hybrid configurations presented refer to such a series architecture, developed by the researchers and Research and Development groups. Regarding energy flows, different strategy logic or vehicle management units have been illustrated. Various configurations and vehicles were studied by simulating different driving cycles, both European approval and homologation and customer ones (typically municipal and university). The simulations have provided guidance on the optimal proposed configuration and information on the component to be used

Winds of Power: Data Analysis for the Relationship between Wind Speed, Gust, and Power Output

Wind turbines are the most cost-effective and quickly evolving renewable energy technology. Benefits of this technology include no carbon emissions, resource conservation, job creation, flexible applications, modularity, fast installation, rural power grid improvement, and potential for agricultural or industrial use

Real-Time Power Management of A Fuel Cell/Ultracapacitor Hybrid

This thesis presents the system architecture design, system integration methodology, and real-time control of a fuel cell/ultracapacitor hybrid power system. The main objective is for the hybrid system to respond to real-world fluctuations in power without negatively impacting fuel cell life. A Proton Exchange Membrane (PEM) Fuel Cell is an electrochemical device which converts the chemical energy of pure hydrogen into electricity through a chemical reaction with oxygen. The high conversion efficiency, zero harmful emissions, high power-to-weight ratio, scalability, and low temperature operation make PEM fuel cells very attractive for stationary and portable power applications. However, fuel cells are limited in responding to fast transients in power demand, moreover power fluctuations have negative impact on fuel cell durability. This motivates the use of a supplementary energy storage device to assist the fuel cell by buffering sharp transients in power demand. The high power density, long cycle life, and efficiency of ultracapacitors make them an ideal solution for such auxiliary energy storage in a hybrid fuel cell system. The power management strategy that determines the power split between the fuel cell and ultracapacitor is key to the power following capability, long-term performance, and life-time of the fuel cell. In this thesis, a rule-based and a model predictive control strategy are designed, implemented and evaluated for power management of a fuel cell/ultracapacitor hybrid. The high-level control objectives are to respond to rapid variations in load while minimizing damaging fluctuations in fuel cell current and maintaining ultracapacitor charge (or voltage) within allowable bounds. An experimental test stand was created to evaluate the performance of the controllers. The test stand connects the fuel cell and ultracapacitor to an electronic load through two dc/dc converters, which provide two degrees of freedom, enabling independent low-level control of the DC BUS voltage and the current split between the fuel cell and ultracapacitor. Experiments show that both rule-based and model predictive power management strategies can be tuned to meet both high and low-level control objectives for a given power demand profile. However, the capability to explicitly enforce the constraints in model predictive scheme and its predictive nature in meeting power demands enables a more systematic design and results in general in smoother performance