12 research outputs found

    Joint Reconstruction of Absorbed Optical Energy Density and Sound Speed Distribution in Photoacoustic Computed Tomography: A numerical Investigation

    Get PDF
    Photoacoustic computed tomography (PACT) is a rapidly emerging bioimaging modality that seeks to reconstruct an estimate of the absorbed optical energy density within an object. Conventional PACT image reconstruction methods assume a constant speed-of-sound (SOS), which can result in image artifacts when acoustic aberrations are significant. It has been demonstrated that incorporating knowledge of an object's SOS distribution into a PACT image reconstruction method can improve image quality. However, in many cases, the SOS distribution cannot be accurately and/or conveniently estimated prior to the PACT experiment. Because variations in the SOS distribution induce aberrations in the measured photoacoustic wavefields, certain information regarding an object's SOS distribution is encoded in the PACT measurement data. Based on this observation, a joint reconstruction (JR) problem has been proposed in which the SOS distribution is concurrently estimated along with the sought-after absorbed optical energy density from the photoacoustic measurement data. A broad understanding of the extent to which the JR problem can be accurately and reliably solved has not been reported. In this work, a series of numerical experiments is described that elucidate some important properties of the JR problem that pertain to its practical feasibility. To accomplish this, an optimization-based formulation of the JR problem is developed that yields a non-linear iterative algorithm that alternatingly updates the two image estimates. Heuristic analytic insights into the reconstruction problem are also provided. These results confirm the ill-conditioned nature of the joint reconstruction problem that will present significant challenges for practical applications.Comment: 13 pages, submitted to IEEE Transactions on Computational Imagin

    Joint Image Reconstruction and Segmentation Using the Potts Model

    Full text link
    We propose a new algorithmic approach to the non-smooth and non-convex Potts problem (also called piecewise-constant Mumford-Shah problem) for inverse imaging problems. We derive a suitable splitting into specific subproblems that can all be solved efficiently. Our method does not require a priori knowledge on the gray levels nor on the number of segments of the reconstruction. Further, it avoids anisotropic artifacts such as geometric staircasing. We demonstrate the suitability of our method for joint image reconstruction and segmentation. We focus on Radon data, where we in particular consider limited data situations. For instance, our method is able to recover all segments of the Shepp-Logan phantom from 77 angular views only. We illustrate the practical applicability on a real PET dataset. As further applications, we consider spherical Radon data as well as blurred data

    Advanced regularization and discretization methods in diffuse optical tomography

    Get PDF
    Diffuse optical tomography (DOT) is an emerging technique that utilizes light in the near infrared spectral region (650−900nm) to measure the optical properties of physiological tissue. Comparing with other imaging modalities, DOT modality is non-invasive and non-ionising. Because of the relatively lower absorption of haemoglobin, water and lipid at the near infrared spectral region, the light is able to propagate several centimeters inside of the tissue without being absolutely absorbed. The transmitted near infrared light is then combined with the image reconstruction algorithm to recover the clinical relevant information inside of the tissue. Image reconstruction in DOT is a critical problem. The accuracy and precision of diffuse optical imaging rely on the accuracy of image reconstruction. Therefore, it is of great importance to design efficient and effective algorithms for image reconstruction. Image reconstruction has two processes. The process of modelling light propagation in tissues is called the forward problem. A large number of models can be used to predict light propagation within tissues, including stochastic, analytical and numerical models. The process of recovering optical parameters inside of the tissue using the transmitted measurements is called the inverse problem. In this thesis, a number of advanced regularization and discretization methods in diffuse optical tomography are proposed and evaluated on simulated and real experimental data in reconstruction accuracy and efficiency. In DOT, the number of measurements is significantly fewer than the number of optical parameters to be recovered. Therefore the inverse problem is an ill-posed problem which would suffer from the local minimum trap. Regularization methods are necessary to alleviate the ill-posedness and help to constrain the inverse problem to achieve a plausible solution. In order to alleviate the over-smoothing effect of the popular used Tikhonov regularization, L1-norm regularization based nonlinear DOT reconstruction for spectrally constrained diffuse optical tomography is proposed. This proposed regularization can reduce crosstalk between chromophores and scatter parameters and maintain image contrast by inducing sparsity. This work investigates multiple algorithms to find the most computational efficient one for solving the proposed regularization methods. In order to recover non-sparse images where multiple activations or complex injuries happen in the brain, a more general total variation regularization is introduced. The proposed total variation is shown to be able to alleviate the over-smoothing effect of Tikhonov regularization and localize the anomaly by inducing sparsity of the gradient of the solution. A new numerical method called graph-based numerical method is introduced to model unstructured geometries of DOT objects. The new numerical method (discretization method) is compared with the widely used finite element-based (FEM) numerical method and it turns out that the graph-based numerical method is more stable and robust to changes in mesh resolution. With the advantages discovered on the graph-based numerical method, graph-based numerical method is further applied to model the light propagation inside of the tissue. In this work, two measurement systems are considered: continuous wave (CW) and frequency domain (FD). New formulations of the forward model for CW/FD DOT are proposed and the concepts of differential operators are defined under the nonlocal vector calculus. Extensive numerical experiments on simulated and realistic experimental data validated that the proposed forward models are able to accurately model the light propagation in the medium and are quantitatively comparable with both analytical and FEM forward models. In addition, it is more computational efficient and allows identical implementation for geometries in any dimension

    Image Reconstruction in Photoacoustic Computed Tomography with Acoustically Heterogeneous Media

    Get PDF
    Photoacoustic computed tomography (PACT), also known as optoacoustic or thermoacoustic tomography, is a rapidly emerging hybrid imaging modality that combines optical image contrast with ultrasound detection. The majority of currently available PACT image reconstruction algorithms are based on idealized imaging models that assume a lossless and acoustically homogeneous medium. However, in many applications of PACT these assumptions are violated and the induced photoacoustic (PA) wavefields are scattered and absorbed as they propagate to the receiving transducers. In those applications of PACT, the reconstructed images can contain significant distortions and artifacts if the inhomogeneous acoustic properties of the object are not accounted for in the reconstruction algorithm. In this dissertation, we develop and investigate a full-wave approach to iterative image reconstruction in PACT with acoustically heterogeneous lossy media. A key contribution of this work is the establishment of a discrete imaging model that is based on the exact PA wave equation and a procedure to implement an associated matched discrete forward and backprojection operator pair, which permits application of a variety of modern iterative image reconstruction algorithms that can mitigate the effects of noise, data incompleteness and model errors. Another key contribution is the development of an optimization approach to joint reconstruction (JR) of absorbed optical energy density and speed of sound in PACT, which is utilized to investigate the numerical properties of the JR problem and its feasibility in practice. We also develop a TR-based methodology to compensate for heterogeneous acoustic attenuation that obeys a frequency power law. In addition, we propose a image reconstruction methodology for transcranial PACT that employs detailed subject-specific descriptions of the acoustic properties of the skull to mitigate skull-induced distortions in the reconstructed image
    corecore