Software-only TDOA/RTF positioning for 3G WCDMA wireless network

A hybrid location finding technique based oil time difference of arrival (TDOA) with round-trip time (RTT) measurements is proposed for a wideband code division Multiple access (WCDMA) network. In this technique, a mobile station measures timing from at least three base stations using user equipment receive-transmit (UE Rx-Tx) time difference and at least three base stations measure timing from the mobile station using RTT. The timing measurements of mobile and base stations are then combined to solve for both the location of the mobile and the synchronization offset between base stations. A software-only geolocation system based on the above mobile/base stations timing measurements is implemented in Matlab platform and the performance of the system is investigated using large-scale propagation models

Determination of MS Location through Building Using AoA Method of Frequency 47 GHz

This research discusses the determination of mobile station (MS) location of the uplink communication system. The location determination mobile station is based on the angle-of-arrival (AoA) method. The communication propagation is influenced by building environment. The building environment was modeled with diffraction method. Several diffraction methods were used such as single knife edge, and multiple knife edge method. The communication frequency used was 47 GHz. The analysis used percentage value at coverage area and comparison of error percent values between two method to determine mobile station location. The percentage of the communication coverage area obtained was 71.4% or of 255 from 300 nodes. The comparison methods used for mobile station location determination were the selection of the best SNR and localization technique. The error percentage value based on the selection of the best SNR method is 0.95%. The error percentage value based on localization technique method is 0.78%

METHOD AND SYSTEM FOR PROVIDING A CONTEXT FOR MESSAGE COMPRESSION

A method for providing wireless communication between a mobile station (12) and a network station (14) using a context for message compression is provided. Profile-specific information is stored persistently in a profile-specific dictionary (24). Communication is then provided between the mobile station and the network station using the profile-specific dictionary (24) for message compression (26).published_or_final_versio

Doppler Shift Effect at The Communication Systems with 10 GHz around Building

This research described the Doppler shift effect for the communication systems. The mobile station moves with various velocities around the building’s environment. Doppler’s shift influences the communication systems. The frequency communication was used 10 GHz and its influenced by atmospheric attenuation. This research consisted of propagation with LOS and NLOS conditions, mobile station velocity variation, height buildings variation, and transmitter power variation. This research described frequency maximum at Doppler shift, coherence time, and signal to noise ratio. More increase Doppler shift of coherence time caused signal noise ratio to decrease.This research described the Doppler shift effect for the communication systems. The mobile station moves with various velocities around the building’s environment. Doppler’s shift influences the communication systems. The frequency communication was used 10 GHz and its influenced by atmospheric attenuation. This research consisted of propagation with LOS and NLOS conditions, mobile station velocity variation, height buildings variation, and transmitter power variation. This research described frequency maximum at Doppler shift, coherence time, and signal to noise ratio. More increase Doppler shift of coherence time caused signal noise ratio to decrease

Некоторые математические соотношения в сотовых сетях радиосвязи

Получен ряд выражений, позволяющих описывать в пространстве изменение передвижения мобильной станции относительно базовой станции в пределах соты. Приведенные соотношения позволяют оценить энергетический потенциал системы мобильной связи и установить зависимость отношения сигнал/шум от местонахождения мобильной станции.A number of expressions allowing to describe in space the change of mobile station transportation towards base station within cell is received. Given mathematics allow to consider power potential of mobile communication system and to set dependence of signal to interference ration on mobile station location

Stochastic Ordering based Carrier-to-Interference Ratio Analysis for the Shotgun Cellular Systems

A simple analytical tool based on stochastic ordering is developed to compare the distributions of carrier-to-interference ratio at the mobile station of two cellular systems where the base stations are distributed randomly according to certain non-homogeneous Poisson point processes. The comparison is conveniently done by studying only the base station densities without having to solve for the distributions of the carrier-to-interference ratio, that are often hard to obtain.Comment: 10 pages, 0 figures, submitted for review to IEEE Wireless Communications Letters on October 11, 201

Performance of multi-user codes in wireless communications

Multi-user codes are a widely used in transmitting user data from base station to mobile station and vice versa. In wireless communications a signal received by a mobile station goes through different fading channels resulting. These multi-paths add constructively and destructively with different delays and attenuation at the mobile station. The autocorrelation and cross correlation properties of the Multi-user codes play a significant role in extracting the user data from the signal corrupted by multipath fading channel. The thesis presents a comparison of different Multi-user codes based on their autocorrelation and cross correlation properties. These codes are passed through a multipath fading models and their performance is evaluated based on the Bit Error Rate (BER). The performance for the Multi-user codes is compared both in synchronous and asynchronous mode of transmission to the base station. The model used for simulating multipath fading channel is Clark model

The Communication System of Building from Outdoor to Indoor with AMC at 10 GHz

The propagation model of communication systems was used propagation from outdoor to indoor of building. In the inside that building used partition with brick. That propagation condition used downlink condition from mobile station side. The communication frequency used 10 GHz. Some parameter variation was used in this research such as radio base station coverage, mobile station location of building, and code rate communication. The coverage variation of radio base station used femtocell and picocell. As the result described signal to noise ratio (SNR)at every node communication, adaptive modulation and coding (AMC) variation, and coverage area percentage in the building. The modulation and coding scheme (MCS) was used consist of QPSK, 16 QAM, and 64 QAMThe propagation model of communication systems was used propagation from outdoor to indoor of building. In the inside that building used partition with brick. That propagation condition used downlink condition from mobile station side. The communication frequency used 10 GHz. Some parameter variation was used in this research such as radio base station coverage, mobile station location of building, and code rate communication. The coverage variation of radio base station used femtocell and picocell. As the result described signal to noise ratio (SNR)at every node communication, adaptive modulation and coding (AMC) variation, and coverage area percentage in the building. The modulation and coding scheme (MCS) was used consist of QPSK, 16 QAM, and 64 QA